Today I acquired...........

[Brad93]

I got some Vevor-branded drill dispenser/tap dispenser boxes from eBay to sort my taps and dies a little.

While my taps and dies were sorted by type - UNC, UNF, Metric, Metric fine, etc.- it still took a while to find the correct size.

View attachment 472149

The three boxes came as a bundle for around £94 delivered.

View attachment 472150

View attachment 472151

They are stackable, but nothing is holding them together and they can potentially slide off each other.

I am thinking of drilling a few holes and using small screws and nuts to make them a solid unit.

View attachment 472152

Starting to sort some taps.

View attachment 472153

View attachment 472154

View attachment 472155

One annoying thing about the boxes is that they don't have a latch/lock when the drawer is closed. On most toolboxes, the drawers latch a little when they are fully closed preventing the drawers from accidentally opening.
I ordered some magnets which I plan to stick on the back of the drawers to see if that will cure the problem.

View attachment 472156

Those look like the Huet? drawers which run about £100 a piece!

Edit: Its Huot not Huet

 

[Arc Tourist]

View attachment 472150

...............................................................

One annoying thing about the boxes is that they don't have a latch/lock when the drawer is closed. On most toolboxes, the drawers latch a little when they are fully closed preventing the drawers from accidentally opening.
I ordered some magnets which I plan to stick on the back of the drawers to see if that will cure the problem.

View attachment 472156

Running a strip of wood along and under the front edge of the boxes to tilt the drawers up a few degrees would also be an easy solution to prevent the drawers sliding forward.

 

[Smouser]

I thought the boxes will be useful, so I ordered another lot

They arrived today.

 

[The_Yellow_Ardvark]

Loving that Ohmmeter! Got a better picture? Does it still work?

It is very unwell.

 

[Memmeddu]

https://www.amazon.co.uk/Stamos-Germany-Selection-S-PLASMA-max-125/dp/B00FALN3K8/ref=sr_1_6?crid=CD1AAD7GVBG4&dib=eyJ2IjoiMSJ9.L7peCpt_92q1elnLrGASmRy4Q081bZMeeG7weOnOvv9vheRzkZyBWWXGNp4k1jhZ2DeJ6Bdmo0so47zss-Z14OAEOeEZ7R9Arl-CEh6tDVGiglS-X3z0o2GryGEM0UQY7L6KSWhdj4B10Pytg6kSBFzbryuNjs6LLEdh46JYUxd1EXv-qEcaX6RyrsQnqHLzdP6LNbAuuA6Z8NBHUCZH5hw9BImZYR0GmPMuQYAdoXlge-wHB4DuCzrlZf1rPla9svsPxX8zDfZ2JUZsJuERioDipN9_gySIhPf55GvPiq4.ZvjubLQuQC2JGtYo_zK-wyfPz8NOZx_1W-IO6s6KDJk&dib_tag=se&keywords=stamos+plasma+cutter&nsdOptOutParam=true&qid=1730646554&sprefix=%2Caps%2C78&sr=8-6&ufe=app_do%3Aamzn1.fos.98356266-f4a7-4749-87f0-6b9133771ba0

I have a Stamos 250A stick and I'm very happy with it.
Bought in 2018 it keeps going strong.
Although I've tried to access to expondo with no luck, I thought they just failed and disappeared

 

[Memmeddu]

I got some Vevor-branded drill dispenser/tap dispenser boxes from eBay to sort my taps and dies a little.

While my taps and dies were sorted by type - UNC, UNF, Metric, Metric fine, etc.- it still took a while to find the correct size.

View attachment 472149

The three boxes came as a bundle for around £94 delivered.

View attachment 472150

View attachment 472151

They are stackable, but nothing is holding them together and they can potentially slide off each other.

I am thinking of drilling a few holes and using small screws and nuts to make them a solid unit.

View attachment 472152

Starting to sort some taps.

View attachment 472153

View attachment 472154

View attachment 472155

One annoying thing about the boxes is that they don't have a latch/lock when the drawer is closed. On most toolboxes, the drawers latch a little when they are fully closed preventing the drawers from accidentally opening.
I ordered some magnets which I plan to stick on the back of the drawers to see if that will cure the problem.

View attachment 472156

I think I need few of those too.
I have a bunch of taps and not so many dies to sort out

 

[Memmeddu]

An ulcer attack, those are the videos which advertising my last video.
Now who's looking for half naked women or an homemade gun are surely interested to click on a 20 plus minutes electric drill restoration....
Only 2 restoration videos promote my video
Results 0.9% click ratio (impressions stopped)
Killed the video in less the 6 hours 54 views mostly from the stuff you have made today link
I'm going to quit YouTube, all the time spent, the money involved etc to then seeing those things happen just make me furious

 

[Onoff]

Have you got the link to "Invredible Show..." please?

 

[zzr1200]

I have a Stamos 250A stick and I'm very happy with it.
Bought in 2018 it keeps going strong.
Although I've tried to access to expondo with no luck, I thought they just failed and disappeared

I messaged them via Amazon to start with regarding the damage, then they emailed me (emails in petty good English maybe not German standards, but far better than Chinessiem), seemed to have good customer service fairly fast answers, considering they appear to be based in Poland or their warehouse is at least.....

 

[Memmeddu]

I messaged them via Amazon to start with regarding the damage, then they emailed me (emails in petty good English maybe not German standards, but far better than Chinessiem), seemed to have good customer service fairly fast answers, considering they appear to be based in Poland or their warehouse is at least.....

They produce in china and assembly in Poland.
They built the machine for you.
I ordered mine on October 2018
Arrived in November 2018
The data plate show a production date in between the order and arrival

 

[Memmeddu]

Have you got the link to "Invredible Show..." please?

I cannot post other than family friendly stuff.
Might be daddy friendly thought

 

[zzr1200]

They produce in china and assembly in Poland.
They built the machine for you.
I ordered mine on October 2018
Arrived in November 2018
The data plate show a production date in between the order and arrival

Mine just states "Production year 2024"

I've also purchased another 10m torch assembly from the Bay of Fleas for hand held cutting not cnc use.

Just need to build the table now....

Expondo shop

Top service ✓ Very reliable ✓ No delivery costs ✓

www.expondo.co.uk

 

[Memmeddu]

Mine just states "Production year 2024"

I've also purchased another 10m torch assembly from the Bay of Fleas for hand held cutting not cnc use.

Just need to build the table now....

Expondo shop

Top service ✓ Very reliable ✓ No delivery costs ✓

www.expondo.co.uk

If it uses p80 torch, there are different shrouds and nozzle available to better suit drag cutting, CNC cutting, plasma gouging

 

[zzr1200]

If it uses p80 torch, there are different shrouds and nozzle available to better suit drag cutting, CNC cutting, plasma gouging

I do have a P80 torch on my R-Tech 50 cutter so will be using these as well for the Stamos, any other types of recommended nozzle cover for cnc use I'm willing to investigate....

 

[Memmeddu]

I do have a P80 torch on my R-Tech 50 cutter so will be using these as well for the Stamos, any other types of recommended nozzle cover for cnc use I'm willing to investigate....

View attachment 472261

Those in in the picture are exactly what I was talking about.
I'm thinking about selling mine as I've used only once since I've got, mine uses trafimet s45.
Little bit underpowered 35A it struggles on 8mm.
Hopefully I'll use it more whenever I get set up in the workshop I'm building

 

[Blobber]

Wow thanks, yeah if you don’t have any use for it - I think, but not 100% sure the keypad was for the earlier generation ones but I could probably make use of it

Here you go, no idea if it still works but if its any use PM me your address and ill bung it in the post

 

[zzr1200]

Those in in the picture are exactly what I was talking about.
I'm thinking about selling mine as I've used only once since I've got, mine uses trafimet s45.
Little bit underpowered 35A it struggles on 8mm.
Hopefully I'll use it more whenever I get set up in the workshop I'm building

An R Tech HF50 fitted with a replacement P80 torch will happily cut 22m, 24mm with care and 25mm with extreme care.

I upgraded to the Stamos for a bit more cutting capacity, but the real reason is as I understand for a cnc plasma table a pilot arc start is perferable to HF (?), which isn't good for the control computer.so I've been told...... .

Plus it was on a reduced price offer as well, which was a smoking deal....

Then a 20% damage discount....

 

[MetalMonkey]

Talking of bandsaws, something a bit more manageable than the ok 36" Robinson re-saw I used to run turned up in the mail this morning:


Breaking the cardinal rule of power tools by having more than one battery system in the workshop, but it was going spare so it seemed churlish not to accept it.

Have ordered a Hikoki-Makita battery converter for convenience, But...

I also picked up a Hikoki charger, I'm in the market for a ¾" battery impact, and the Hikoki WR36DFQ4 is just way better value for money than the Makita DTW1001, which are both more powerful than the Milwaukee equivalent.

Must be one of the original batch as they were not Hitachi very long after they launched those before they rebranded.
Great little saws, I use mine a lot especially handy for swift cuts on pipe, angle and box.

The Milwaukee blades fit, but they are a bit rubbish and tend to fracture before they wear out so I'd skip those.
It also likes to collect chips, so I give it a good shake after a couple of cuts and open up the lid and brush it out every so often.

I don't have any need/justification for the high torque impacts, but I found their mid torque (WR36DE) is very capable.
They don't always have the biggest numbers, I think Makita and Milwaukee usually have beefier ones, but for what you get for the money they are pretty good and well thought out.
I just wish they had better availability/stock and promotions. On the other hand, my wallets glad they don’t.

 

[Mikes]

Not today but actually last Sunday but only just got around to photoing them. A box of Sykes Pickavant pullers of all shapes and sizes and including two hydraulic units. None seem to have been used very much. Also a King Dick 1/2" drive A.F. socket set. Again doesn't look to have seen much use and some sockets are virginal. Both given to me by a good mate who is starting a major downsizing exercise which he reckons will take him 2 years to get through due to the quantity of stuff that he has.

 

[Kram]

I thought the boxes will be useful, so I ordered another lot

They arrived today.

View attachment 472163

You do know that in this thread, links as well as pictures are required?

Looks useful, may have to get a couple.


If anyones interested, I have finally located the missing spare plasma tips. I had decanted the broken on arrival box, into the tool draws above the lathe. Its about a month since I had access to that part of the shed.