Pretty much most hobby grade 3d printed things are not food safe unless you seal it.
- Thread starter monkeymark
- Start date
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,316
- Location
- Going Away.
One nice cheque from the local scrap yard, they wrote off the skip hire.
As the metal in the skip was bagged and labled to what it was.
Ferrous on the bottom, loose. Non ferrous on top, all bagged and boxed.
Me had a lockable skip, I fitted Asbestos signs to it.
As the metal in the skip was bagged and labled to what it was.
Ferrous on the bottom, loose. Non ferrous on top, all bagged and boxed.
Me had a lockable skip, I fitted Asbestos signs to it.
Memmeddu
Member
- Messages
- 5,505
- Location
- Italia Sardegna
Because otherwise it would have been great for cups or glasses.
Having the thermal sensitivity it would have been pretty cool
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,316
- Location
- Going Away.
I was the second car into my local recycling centre this morning.
The last of my many trips there, only once did I return with anything.
Top of the gangway to the metal skip was placed these two items.
Not for long.
The last of my many trips there, only once did I return with anything.
Top of the gangway to the metal skip was placed these two items.
Not for long.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,316
- Location
- Going Away.
Additional to the above.
One of the nice workers asked me over to the office.
Gave me this.
One of the nice workers asked me over to the office.
Gave me this.
Memmeddu
Member
- Messages
- 5,505
- Location
- Italia Sardegna
Amazon returned item
Paid €48,82 shipped to my door
Those things are pretty expensive even the cheap ones are just too much money for my needs.
Description says scratched, damaged box etc etc
An used or retuned item essentially but It can be just shipping damage.
Anyways
It should work if not I'll see my money back.
I don't need it to lift anything, I'll use it to drag around my milling machine and most likely never use it again.
1.5 Chinese tons and 2.8 meters long chain.
Milling machine is 750kg and I'll use rollers beneath
Paid €48,82 shipped to my door
Those things are pretty expensive even the cheap ones are just too much money for my needs.
Description says scratched, damaged box etc etc
An used or retuned item essentially but It can be just shipping damage.
Anyways
It should work if not I'll see my money back.
I don't need it to lift anything, I'll use it to drag around my milling machine and most likely never use it again.
1.5 Chinese tons and 2.8 meters long chain.
Milling machine is 750kg and I'll use rollers beneath
MetalMonkey
Member
- Messages
- 3,356
- Location
- UK
The poor bastard fixing the gangway that went back to grab a couple of bolts is going to be cursing.
3 hilti gx120 nail guns however after bidding I discovered the gc22 gas cartridge they use is basically discontinued and only option is the gc42 but without buying both (£50 for gc22 from Hilti only and £35 in ebay for gc42) I don't know if I can make the gc42 fit as a replacement as it looks the same just slightly longer so does anyone happen to have either cartridge that they could measure up for me?
Also got a te300 needle gun for a steal, was £200 reserve then £100 then £75 and then accepted my £47
And this Wohlhaupter UPA4 Universal Boring & Facing Head that nobody bid on but no idea how it works yet or what I need it for other than a cool piece of engineering unless someone wants it
Also got a te300 needle gun for a steal, was £200 reserve then £100 then £75 and then accepted my £47
And this Wohlhaupter UPA4 Universal Boring & Facing Head that nobody bid on but no idea how it works yet or what I need it for other than a cool piece of engineering unless someone wants it
Maker
Most folk just call me; Orange Joe
- Messages
- 10,631
- Location
- Keeler crater
3 hilti gx120 nail guns however after bidding I discovered the gc22 gas cartridge they use is basically discontinued and only option is the gc42 but without buying both (£50 for gc22 from Hilti only and £35 in ebay for gc42) I don't know if I can make the gc42 fit as a replacement as it looks the same just slightly longer so does anyone happen to have either cartridge that they could measure up for me?
View attachment 508270
Also got a te300 needle gun for a steal, was £200 reserve then £100 then £75 and then accepted my £47
View attachment 508271
And this Wohlhaupter UPA4 Universal Boring & Facing Head that nobody bid on but no idea how it works yet or what I need it for other than a cool piece of engineering unless someone wants it
View attachment 508272
Boring head is a seriously nice find. Looks like a 50 taper so possibly not too useful to most hobbyist, but I believe the shank is replaceable on some models.
Just remember chains are no good at pushing. Make sure you've got a method to stop it in case it gets a gallop on once you've got it moving!
There's what looks like a morse taper piece with it not sure what size but it's about the same width as the removable quick change piece in the 50 taper end.
Probably no good for me so hopefully friend can use it in the mill otherwise if anyone wants it then pm.
What is it?
Aka someone offered him more and he is just waiting to see if they view the carI am trying to aquire a Mercedes 190 Cosworth. After seeing the car on Saturday and agreeing the sellers asking price that I'd take it, he then said he isnt sure if he is selling it and will come back to me
JOEPRO
Member
- Messages
- 4,908
- Location
- UK
That or he is still trying to see if he can wring more £ out of it yes. Maybe trying to get others interested as its not advertised that I know of.
arther dailey
Member
- Messages
- 6,899
- Location
- England
if its not advertised perhaps he was nt intending selling and is cchecking out current actual maket value , although after agreeing a price is some what bad form .good luck with the purchase
JOEPRO
Member
- Messages
- 4,908
- Location
- UK
if its not advertised perhaps he was nt intending selling and is cchecking out current actual maket value , although after agreeing a price is some what bad form .good luck with the purchase
Well I just messaged to say my offer expires at midday tomorrow so at least now ill know by tomorrow. Aka I will move on at that point and forget about the car. If he is trying to get better £ he won't be doing it on my time!
Memmeddu
Member
- Messages
- 5,505
- Location
- Italia Sardegna
What do you suggest?
My idea was laying down some sheets because it's actually on ground right now.
Lift it up little bit to put 12mm at the most round bars (so it's not able to tilt), put a belt at the lowest of the column and slowly moving it using the lever hoist.
Almost on flat slightly uphill then once on concrete using a pry bar
Memmeddu
Member
- Messages
- 5,505
- Location
- Italia Sardegna
Not even our bigger machines at work use iso 50 at work.
They are all iso 40 except for the jib borer that uses Morse taper 5 with retaining wedges and a four lugs tool holder for the boring and milling attachments
I believe this boring heads is from an huge machine in the 15 up to 25ish HP size as ours are 12HP using iso 40
