Lewis_RX8
Member
- Messages
- 1,566
- Location
- Scotland
I bought cheap first time on rigger boots for at home , Now spent that little bit more and find them real comfy and warm. Lifes too short
- Thread starter monkeymark
- Start date
Hood
I am obsessed.
- Messages
- 17,884
- Location
- Carnoustie, Scotland
Today I acquired a SW Motech centre stand that I ordered on Christmas day with some money I got.
It was supposed to be in stock but heard nothing until I called them last week, there had been a mix up and there was no stock but more would be in soon.
Took 10 minutes to fit
Means I don't have to use the Abba SkyLift for chain maintenance etc
It was supposed to be in stock but heard nothing until I called them last week, there had been a mix up and there was no stock but more would be in soon.
Took 10 minutes to fit
Means I don't have to use the Abba SkyLift for chain maintenance etc
Today I acquired a SW Motech centre stand that I ordered on Christmas day with some money I got.
It was supposed to be in stock but heard nothing until I called them last week, there had been a mix up and there was no stock but more would be in soon.
Took 10 minutes to fit
View attachment 327809
Means I don't have to use the Abba SkyLift for chain maintenance etc
View attachment 327810
Your properly getting into tweaking the bikes again aren't you?
Hood
I am obsessed.
- Messages
- 17,884
- Location
- Carnoustie, Scotland
Aye, 25 years of pain every time I saw a bike going past but now I have one again so ...
Aye, 25 years of pain every time I saw a bike going past but now I have one again so ...
Just boys and their toys then!
Hood
I am obsessed.
- Messages
- 17,884
- Location
- Carnoustie, Scotland
I sold my bike so I could buy a lathe, it was painful
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,998
- Location
- Going Away.
I know they can, but I was talking talking about @Hood.
Unless a loveable hairy Scottish bloke likes being called a girl?
but @The_Yellow_Ardvark that's up the their life choices on the weekend and I'm not to decide that.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,998
- Location
- Going Away.
I say nothing.
What each does in private stays that way.
Unless you upload it to the www.
slim_boy_fat
Member
- Messages
- 29,363
- Location
- Scottish Highlands
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
You can still trade power for speed, especially on the return stroke of the cylinder and on the unloaded part of the forward stroke - it's all a matter of clever circuitry (and some valves, etc., but you can find them used) - it's fantastic what you can do with hydraulics. 
Good progress!
Carsten
--
Kayos
Gone......
- Messages
- 9,607
- Location
- Yorkshire
Another camera
Canon 700d, actually a decent spec
24-105 lens, fixed f5.6 (with 4 stop image stabilisation doesn't need to be any faster) 35mm and 50mm prime, genuine hoods, decent flash with ettr and auto focal length and loads of filters and bits in a decent bag
£200
Will be useful to chuck in the van or a backpack when I dont want a 5d or a 7d rattling around, to be fair its more the lenses I worry about but at that price I couldn't say no
Canon 700d, actually a decent spec
24-105 lens, fixed f5.6 (with 4 stop image stabilisation doesn't need to be any faster) 35mm and 50mm prime, genuine hoods, decent flash with ettr and auto focal length and loads of filters and bits in a decent bag
£200
Will be useful to chuck in the van or a backpack when I dont want a 5d or a 7d rattling around, to be fair its more the lenses I worry about but at that price I couldn't say no
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,998
- Location
- Going Away.
Not much stuff found today.
But some bits I will use and find usefull.
This smart Little plane is the subject of another post.
The file handles, 10p for the pair. The weight of them is shocking. A very dense wood.
A old oil can.
A Rabone Caliper rule. Needs a polish and is good to go.
The oil can.
A Singer Pie Crust Oil can, a hard to find in working order.
A nice odd bit of history.
The whole lot is 3"high.
The "kettle" is fluid tight.
The base is not.
The use.
The base or "mug" held charcoal and in the kettle went solid wax concetrate dye.
When the wax dye was liquid and small amount was used to make a batch of dye up.
This was worth every penny spent
1950's 2 wick Meths burner for early Mamods.
Original rubber cork, in white. It is shot.
The burners are cotton rope wicks.
It is fuel tight as well.
This is why I spent money.
It fits the Mamod I got the other day.
But some bits I will use and find usefull.
This smart Little plane is the subject of another post.
The file handles, 10p for the pair. The weight of them is shocking. A very dense wood.
A old oil can.
A Rabone Caliper rule. Needs a polish and is good to go.
The oil can.
A Singer Pie Crust Oil can, a hard to find in working order.
A nice odd bit of history.
The whole lot is 3"high.
The "kettle" is fluid tight.
The base is not.
The use.
The base or "mug" held charcoal and in the kettle went solid wax concetrate dye.
When the wax dye was liquid and small amount was used to make a batch of dye up.
This was worth every penny spent
1950's 2 wick Meths burner for early Mamods.
Original rubber cork, in white. It is shot.
The burners are cotton rope wicks.
It is fuel tight as well.
This is why I spent money.
It fits the Mamod I got the other day.
Dieselman 63
Forklift Certified
- Messages
- 5,862
- Location
- Wellington, New Zealand
Oops I did it again…
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
Same here.
For years I went the budget route with work shoes
and have rarely felt comfortable enough in them with my feet
(except of course the protective boots for chainsaw work in the forest).
Now I have found a good deal on S3 shoes from one of the leading manufacturers here:
Of course, I also wonder which was the decisive work step on the things that legally just allows to label them Made in Germany - the imprint on the tongue, packing in the box, threading the laces into exactly one eyelet?
Wouldn't a significant part of the production be done in countries with lower wages and cost of living ... no special offer would make them affordable here ....
Anyway: These make the feet feel good for the time beeing
Carsten
--
DAPPH
as dyslexik as I'm daft
- Messages
- 7,329
- Location
- Near to Cross Hands Llanelli SouthWales GB
Carsten ,
Recommended here in the forum ....
.... ordered on 11.11.2021 ....
..... delivered today - but to the front door and without shipping costs:
View attachment 327728
Have a nice day everybody,
Carsten
--
Can you add the ISBN code number from the back of the book's cover to appear a few lines below the picture please?
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
You're absolutely right, @DAPPH - that should actually come naturally.
I will make it a habit to think about it right away in the future:
Thanks for the tip!
Have a wonderful weekend all
Carsten
--
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,998
- Location
- Going Away.
Fired the camera up this morning
3Gb memory card and that was soon formated.
2 new batteries and it works a charm.
Kayos
Gone......
- Messages
- 9,607
- Location
- Yorkshire
Compacts like that are usually under rated or discarded due to "not enough megapixels"
In reality they are often better than most phones (yes I know, your phone camera is awesome) but they use ai and processing to achieve it, blown up or viewed on a calibrated monitor most phone camera pics look like phone camera pics, and the new ai bokeh modes just look wrong
Compare a shot taken on an f1.4 50mm lens and a phone camera with fake bokeh and you will see what I mean
