addjunkie
Member
- Messages
- 14,909
- Location
- Northumberland. Reet oot in the sticks
That type of boat…Mastercraft is used for water skiing and wakeboarding
- Thread starter Cato
- Start date
Cato
Member
- Messages
- 3,289
- Location
- Birmingham, UK
I've yet to take off a failed alarm, I have however taken off a few that were fried by **** poor installs. High resistance connections being the main culprit where they've been installed with insulated terminals from the local market, bodge locks, and solder gobbed on.
- Messages
- 24,366
- Location
- Birmingham
Versus I've had 3 bikes fitted with Datatool alarms and the only problem I had was when the sounder failed on the oldest.
I believe Datatool saved my garage contents one night as I used to park my bike very close to the doors and when someone forced the doors they must have bumped the bike as they climbed through the gap so the very loud sounder would be right next to their ears.
Pete.
Forum Supporter
- Messages
- 15,142
- Location
- Kent, UK
One of mine would work if you twisted the board slightly (with it removed obviously). I had called Datatool and they said that it as toast and sometimes the fluid leaks out of the nudge sensor too. Spares weren't available in 2017 they sure as heck won't be any now.
Had two fail personally and I've had to resuce a mate when one packed up whilst he was riding.
If you're stranded with a failed system 3 find some tools to rip the lid off. Un-plug the big connector then join the wires on terminals 1&2, then 5&6 on the little one. That'll get you going.
Had two fail personally and I've had to resuce a mate when one packed up whilst he was riding.
If you're stranded with a failed system 3 find some tools to rip the lid off. Un-plug the big connector then join the wires on terminals 1&2, then 5&6 on the little one. That'll get you going.
- Messages
- 24,366
- Location
- Birmingham
Did you find somewhere to squeeze the earth rail in?.
Cato
Member
- Messages
- 3,289
- Location
- Birmingham, UK
He's bringing the seat and tank over on Monday so that I can see what the space is like. I suspect it will either need the coils moving elsewhere or another box fitted behind the battery box as there's quite a bit to wedge in and with things like the coils & reg/rec generating heat and interference I don't want it all rammed together.
Cato
Member
- Messages
- 3,289
- Location
- Birmingham, UK
He's had his breakfast, a walk, a run round the grass, a big chew thing and thrown himself into his 'workshop bed' in a sulk. Normally he'd be at home on retirement hours with Barbara, so an early start to a place of work does not fit in with his ideas for 'living his best life'.It's the second breakfast which will be the problem, get another organised and normal relations will resume.
Bloody great pampered ponce that he is.
Melvyn Best
Member
- Messages
- 2,097
- Location
- Cambridge
He’s a Labrador, they always do their Oliver impersonation!He's had his breakfast, a walk, a run round the grass, a big chew thing and thrown himself into his 'workshop bed' in a sulk. Normally he'd be at home on retirement hours with Barbara, so an early start to a place of work does not fit in with his ideas for 'living his best life'.
Bloody great pampered ponce that he is.
