lchris21
Member
- Messages
- 2,005
- Location
- South Wales
I love my M300
....nice tool holder idea Im going to pinch that.................by the way who's the geezer staring through the smoked glass window
- Thread starter monkeymark
- Start date
....nice tool holder idea Im going to pinch that.................by the way who's the geezer staring through the smoked glass window
droopsnoot
Member
- Messages
- 1,358
- Location
- South Cheshire, UK
A Velux window. I'm not sure it's possible to fit a 21.5" wide Velux window into a roof that has rafters 18" apart without some major work, but I'll have to look into it. Or through it, if it is.
Gragson
Member
- Messages
- 2,683
- Location
- Bucks
Got myself a 6LB maul as eldest is regularly supplying rubble bags of wood for the outside fire.
And as the Mrs has stolen my nylon Thor, I bought myself a bigger 38mm one which came with the soft grey ends as well as the white standard one which was a nice surprise.
And as the Mrs has stolen my nylon Thor, I bought myself a bigger 38mm one which came with the soft grey ends as well as the white standard one which was a nice surprise.
Gragson
Member
- Messages
- 2,683
- Location
- Bucks
I love my M300
Great minds
I saw this at the tip today and it fell in the boot! which will be getting repurposed for that.
roblane65
Member
- Messages
- 2,221
- Location
- Newcastle UK
Quite a haul this afternoon of FB marketplace , all I went for was
some anvil stakes , ( it's a shame the two small ones won't fit in the anvil ) but after a bit of a chat with the seller I came away with this lot
one of the hammers is a duplicate , and this
it may become a lamp and a hand former ( very well home made .must be 30kg + )
it will take up to 500mm and another Ingersol rand upright compressor in very nice condition , twin pump.
pick it up saturday as the wallet was bare . Mind for what I paid for it all it would have been rude to say no
some anvil stakes , ( it's a shame the two small ones won't fit in the anvil ) but after a bit of a chat with the seller I came away with this lot
one of the hammers is a duplicate , and this
it may become a lamp
and a hand former ( very well home made .must be 30kg + )it will take up to 500mm and another Ingersol rand upright compressor in very nice condition , twin pump.
pick it up saturday as the wallet was bare . Mind for what I paid for it all it would have been rude to say no
- Messages
- 23,533
- Location
- Birmingham
Forced to go to Aldi today by Mrs Robo, it would have been rude not to check out the centre aisle and as I had lost a couple of cheap straps recently, these were a bargain for £6 for a set of 4
Those bottle jacks are awesome. Pushing things apart horizontally.
lotus_esprit_s1
Member
- Messages
- 849
- Location
- UK
How much is the 10R on offer? They seem to be £639 online, I may get one to have a play with, I think I will go for the GYS over the Sealey on past experience with Sealey kit?
lotus_esprit_s1
Member
- Messages
- 849
- Location
- UK
Both the GYS and the Sealey VS230 are available for £640ish inc vat. Nowhere is local to me so it will be whoever is cheapest by mail order.
Looking at the specs and video the GYS seems a better built machine however it is only 1000W whereas the Sealey is 2000W, so now I can’t decide! Is the VS230 one you have experience with?
Looking at the specs and video the GYS seems a better built machine however it is only 1000W whereas the Sealey is 2000W, so now I can’t decide! Is the VS230 one you have experience with?
James1979
Member
- Messages
- 8,418
- Location
- Orkney
Yes it’s the 230. I am impressed with it. I probably use it beyond its means but I just hold it on till stuff glows. I’m using it in a commercial truck garage for wheelnuts and ball joints that have never been off etc.
It is a game changer.
If I was buying and had the cash, I’d go as big as I could afford. But if you’re mainly doing car stuff I reckon you won’t have any issues with the 230 at all.
I just work with “go big or go home”
When buying stuff.
The bootlace is the only attachment I’ve used. So can’t comment on the others. They are where the money is when you replace them though.
I like the GYS ends. They’re better.
It is a shame you can’t try one first.
Last edited:
sardine
Member
- Messages
- 3,727
- Location
- Buckinghamshire
I've got two bins I chuck every bit of scrap brass and copper in, it's a good payout when they get weighed in.
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,841
- Location
- Sevenoaks, UK
I had 13kg of brass fittings so all clean 'ish. Then 48kg of chromed brass, mainly taps, soap dispensers and wastes.
James1979
Member
- Messages
- 8,418
- Location
- Orkney
Seems there’s a website for every fetishQuite a haul this afternoon of FB marketplace , all I went for was
View attachment 369812
some anvil stakes , ( it's a shame the two small ones won't fit in the anvil ) but after a bit of a chat with the seller I came away with this lot
View attachment 369813
one of the hammers is a duplicate , and this
View attachment 369814
it may become a lamp
View attachment 369815
it will take up to 500mm and another Ingersol rand upright compressor in very nice condition , twin pump.
pick it up saturday as the wallet was bare . Mind for what I paid for it all it would have been rude to say no
!!
James1979
Member
- Messages
- 8,418
- Location
- Orkney
roblane65
Member
- Messages
- 2,221
- Location
- Newcastle UK
No I’m just into Jacks.
And feet
Feet ! that's wide open to interpretation
I had a lovely three section wind up jack nicked out me garden by the thieving scrappers 
it was massive at least a 10 tonner I would think . Do you collect them ? jacks that is not feet .
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,988
- Location
- Going Away.
A Shelly Jack for you.
This it it dressed.
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
