mrsbruce
Member
- Messages
- 1,974
- Location
- Livingston, Scotland
Thanks, but unfortunately the machine uses 10-11mm length cutters. They’ve put the fitting point at the top of the cutter holder.
- Thread starter monkeymark
- Start date
slim_boy_fat
Member
- Messages
- 29,508
- Location
- Scottish Highlands
DAPPH
as dyslexik as I'm daft
- Messages
- 7,489
- Location
- Near to Cross Hands Llanelli SouthWales GB
Somebody who wants to collect it , in different clothes at a different time when they have a mode of transport handy?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
A box , a heavy box.
A box wrapped in about 1 mile of duct tape.
I may be some time.
A box wrapped in about 1 mile of duct tape.
I may be some time.
Maker
Most folk just call me; Orange Joe
- Messages
- 10,633
- Location
- Keeler crater
Sucks to be them then, you snooze you lose.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
The box was delivered by Fed Ex and left with a neighbour.
This is the box after 5 layers of duct tape, plastic wrap and bubble wrap.
It was a bit of a weight.
The contents shown, as the were uncovered from the packing media.
1/4" draper socket set and a set of very fine scredriver bits.
A Brass multi blade screwdriver,a draper baby ratchet , old tyre pressure guage, a police whistle, circlip pliers and a Meccano Screwdriver.
3/8 Brest drill, a valve(?) ascrewdriver and a pair of end cut wire cutters.
Two small, but heavy planes.
Yes, I don't know why.
This is the box after 5 layers of duct tape, plastic wrap and bubble wrap.
It was a bit of a weight.
The contents shown, as the were uncovered from the packing media.
1/4" draper socket set and a set of very fine scredriver bits.
A Brass multi blade screwdriver,a draper baby ratchet , old tyre pressure guage, a police whistle, circlip pliers and a Meccano Screwdriver.
3/8 Brest drill, a valve(?) ascrewdriver and a pair of end cut wire cutters.
Two small, but heavy planes.
Yes, I don't know why.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
There is more.
A brass anvil and stand and a 30mm Steel case.
I knew this was going to be sent to me.
This is why the box was sent from Israil.
1950's Mamod Line shaft.
A brass anvil and stand and a 30mm Steel case.
I knew this was going to be sent to me.
This is why the box was sent from Israil.
1950's Mamod Line shaft.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
Not what I was expecting, but I do know why some items were added.
Old Small Mamod engine, needs much tlc.
A rusty paper weight, for now.
I asked for this engine for spares, for one I was going to restore.
But it has parts I want, but it is also missing good parts.
A beer will help.
The odd items added to the package/
To bulk the weight up.
It seams it is cheeper to send a heavier parcil, up to a certain size, than it it was to send the nice items.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
In this case, making up weight, plus it is in the original box.
The designed use?
No idea.
8ob
Member
- Messages
- 14,449
- Location
- Nescient in the vale
Onthespotwelding
Member
- Messages
- 617
- Location
- Kent - England
Brauer clamp for £5 
Looks like it’s had a repair done at some point Works well enough
All I’m going to do is give it a Squirt of oil and throw it in the draw.
Looks like it’s had a repair done at some point Works well enough
All I’m going to do is give it a Squirt of oil and throw it in the draw.
julianthegypsy
Member
- Messages
- 4,334
- Location
- Cirencester
Is that a mustard pot?
Gragson
Member
- Messages
- 2,644
- Location
- Bucks
A maxillary right lateral incisor replacement. Too gross for pics 
When I went for the assessment appointment he gave me 3 options from about 3.5k to £400 for a made to measure clip on job.
Went for cheapest clip on, installed today but he fitted a permanent fitted replacement, and as it took them a while on the install procedure I thought this ain't right, great fit and match, paid £380, and knowing it might come back on me I said I think there's been a mistake.
He said the mistake was mine and £380 is what we initially quoted you - a very honest dentist, saved a bunch of cash, well chuffed
When I went for the assessment appointment he gave me 3 options from about 3.5k to £400 for a made to measure clip on job.
Went for cheapest clip on, installed today but he fitted a permanent fitted replacement, and as it took them a while on the install procedure I thought this ain't right, great fit and match, paid £380, and knowing it might come back on me I said I think there's been a mistake.
He said the mistake was mine and £380 is what we initially quoted you - a very honest dentist, saved a bunch of cash, well chuffed
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
Todays Mamods, a lot of work needed.
Which one to restore?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,333
- Location
- Going Away.
Yes it is.
With a Bristol Blue insert.
julianthegypsy
Member
- Messages
- 4,334
- Location
- Cirencester
zeppelin builder
Member
- Messages
- 2,179
- Location
- peoples republic of scotland
some nice wee machinists v blocks
still in original boxes
Draper marked FORIEGN i thought draper was Japanese but maybe they were made in England lol
Draper marked FORIEGN i thought draper was Japanese but maybe they were made in England lol
but it was going begging 