Today I acquired...........

[slim_boy_fat]

Sorry to read about this, but what were you doing out on a mountain bike, given that.....

Complicated brake just below a already damaged knee

Not having a go, just don't get the thinking.....

 

[WorkshopChris]

Sorry to read about this, but what were you doing out on a mountain bike, given that.....


Not having a go, just don't get the thinking.....

Exercise, fitness. weight loss all going well battery assisted (with doctors approval), i need a total knee replacement in the future but wont do at the moment because of my age.
Yesterdays injury was the ends of the 2 leg bones banning together as there is little cartridge left in the knee to avoid the impact.
I have only seen the xrays not the ct scan results yet but from the top surface of the bone i now a dent and crack in a downwards direction.
they are planning on drilling into the bone so they can knock the dent back out to get a good profile, then filling the void with mesh to encourage bone to grow and what almost sounded like wrapping a jubilee clip around the top of the bone to stop the split opening and continuing down along its length.
I didn't realise i had broken it a first took me half hour do the last 5 mins of a normal 12 min journey.

 

[slim_boy_fat]

i need a total knee replacement in the future but wont do at the moment because of my age.

Wow!! You have my sympathy. I Understand the circumstances now.

It's a bit of a b*gger this getting old, isn't it.

 

[Cuthy246]

Multi fuel burner for the workshop, £50 as a mate at work was having a new one put in so I got dibs on this. Needs a new grate and some new fire brick but very tidy otherwise.

 

[Memmeddu]

Yes, going to see how far I can go with it.

Is something would like to try me to .
Let me know how is gone

 

[Arc Tourist]

Exercise, fitness. weight loss all going well battery assisted (with doctors approval), i need a total knee replacement in the future but wont do at the moment because of my age.
Yesterdays injury was the ends of the 2 leg bones banning together as there is little cartridge left in the knee to avoid the impact.
I have only seen the xrays not the ct scan results yet but from the top surface of the bone i now a dent and crack in a downwards direction.
they are planning on drilling into the bone so they can knock the dent back out to get a good profile, then filling the void with mesh to encourage bone to grow and what almost sounded like wrapping a jubilee clip around the top of the bone to stop the split opening and continuing down along its length.
I didn't realise i had broken it a first took me half hour do the last 5 mins of a normal 12 min journey.

Hope you recover soon.

 

[Arc Tourist]

Picked this up the other day from Lidl

Not bad for £10. Saves my expensive fluke from getting wrecked for simple general purpose stuff in the workshop


View attachment 166068

They just arrived at my local Lidl. Nice unit for the price. Noticed the "Achtung" under the stand, so am more confident the quality is going to be better than those from the far east.

Thanks for the heads up.

 

[Turbo]

Exercise, fitness. weight loss all going well battery assisted (with doctors approval), i need a total knee replacement in the future but wont do at the moment because of my age.
Yesterdays injury was the ends of the 2 leg bones banning together as there is little cartridge left in the knee to avoid the impact.
I have only seen the xrays not the ct scan results yet but from the top surface of the bone i now a dent and crack in a downwards direction.
they are planning on drilling into the bone so they can knock the dent back out to get a good profile, then filling the void with mesh to encourage bone to grow and what almost sounded like wrapping a jubilee clip around the top of the bone to stop the split opening and continuing down along its length.
I didn't realise i had broken it a first took me half hour do the last 5 mins of a normal 12 min journey.

It sounds like an ideal job for cable ties & duct tape & maybe a bit of isopon for the dent.

Dr Turbo, MB (Master Bodger)

PS, get well soon.

 

[The_Yellow_Ardvark]

So today i acquired a leg brace after coming off my mountain bike last night.
View attachment 166258
Complicated brake just below a already damaged knee, just waiting for a call to find out if they are fitting the stainless Meccano Tomorrow or Monday.
As if life wasn't stressful already.

Get well soon.

Settle down with a good book, a wee dram and a relaxe.

 

[WorkshopChris]

Get well soon.

Settle down with a good book, a wee dram and a relaxe.

I would love to but i have work up to my eyeballs, i just want to know how long i will be out of action for, cant put any weight on it at the moment and can not bent it witch is the biggest problem. They have said as soon as they operate i can start bending it. I had the first injury in Jan five years ago, i have only just got back up to speed and build the business back up, still got lots to sort out in the new workshop.
Last time with all the complications i was out for about 6 months.
I was just about to order 4 grands worth of new machine today just glad i didn't phone the rep and order yesterday afternoon.

 

[The_Yellow_Ardvark]

I would love to but i have work up to my eyeballs, i just want to know how long i will be out of action for, cant put any weight on it at the moment and can not bent it witch is the biggest problem. They have said as soon as they operate i can start bending it. I had the first injury in Jan five years ago, i have only just got back up to speed and build the business back up, still got lots to sort out in the new workshop.
Last time with all the complications i was out for about 6 months.
I was just about to order 4 grands worth of new machine today just glad i didn't phone the rep and order yesterday afternoon.

I am still on one crotch, nearly 3 months after my fall.

But I am lucky I have a good doc and good after care team. I made myself a brace and used it with what the hospital gave me to get around.

You will be surprized how quick you adapt and find ways to do old things anew.

 

[The_Yellow_Ardvark]

A while ago I got my self a Record Pipe stand. I lent it to MIS and found out it was damaged. So I took it home.



Minus the vice, odd that. It was a small Record vice.





Stripped of paint and redone in Blue smooth Hamerite
The wooden base is wood salvaged from an old church pew, cut into 3" stripes, a routed bead and fitted.

The frame they sit on was heavily repaired by welding in patches and dressing back.

The vice on top is a vice I acquired, it was the tatty Boom Vice. I mounted it on 30mm oak and bolted it to the repaired vice plate.

I had to fill in 10 additional holes, stick welded the holes.



The replacement pipe vice is again on 30mm oak.
Both can be swopped over quickly by unbolting 3 x M10 nuts.

 

[The_Yellow_Ardvark]

Got that last Saturday.
As posted here.

No manufacture name, no details and clearly no box.

But.
I found out it is, or as near to be a Screwfix version.
With that in mind I E mailed Screwfix and today I got a reply. Snail mail.
In it was a copy of the instructions, free of charge.
It is complete, just lacking a box.

 

[WorkshopChris]

I am still on one crotch, nearly 3 months after my fall.

But I am lucky I have a good doc and good after care team. I made myself a brace and used it with what the hospital gave me to get around.

You will be surprized how quick you adapt and find ways to do old things anew.

Just dug this out and fitted fresh batteries.
Illuminated crutch saves trying to balance while battling to free you arm to turn light switches on at night and makes it easier to see if you have to go outside in the dark. Didn't think i would be needing it again this soon. Made this last time.

Led strip fitted with a push switch and some aa battery packs.

 

[The_Yellow_Ardvark]

Just dug this out and fitted fresh batteries.
Illuminated crutch saves trying to balance while battling to free you arm to turn light switches on at night and makes it easier to see if you have to go outside in the dark. Didn't think i would be needing it again this soon. Made this last time.
View attachment 166364
Led strip fitted with a push switch and some aa battery packs.

I fitted a Nerf gun discharge bolt into mine.

Mini Me face was a classic "OMG" as I shot her with the nerf dart.

 

[eLuSiVeMiTe]

Some of this.

And I need to make it look like one of these.

Didn't think it would be economical to cut and turn the 120mm dia bar I've got kicking around.

 

[brewdexta]

Yet another table saw, a bit bigger than the one from last week, this is a Wadkin AGS12 last week's was an AGS 10 and in better nick, with a foot emergency pedal and dust collection/extraction port.

Just needs a crown guard.

I'll be selling the AGS 10, I have a single phase motor for it and an NVR switch, just need a 24mm shaft double pulley. I'll convert it when I get time.

Cheers
Andy

 

[Turbo]

Sometime last year I acquired the battery on the left along with several other batteries. No use to me as I had no charger or tool to use it but I kept it anyway!

Last week I acquired the drill body, a bosch 24v sds, no idea if it worked.

Last night I acquired the drill & charger on the right.

Put them all together tonight & I've acquired a Bosch 24v sds drill & charger working perfectly plus 2 working batteries that still hold some charge.

Batteries will need some refurbishment but one managed 2 x 18mm holes through a 6" concrete block so it will be fine for small holes as it is.

 

[Memmeddu]

View attachment 166380

Sometime last year I acquired the battery on the left along with several other batteries. No use to me as I had no charger or tool to use it but I kept it anyway!

Last week I acquired the drill body, a bosch 24v sds, no idea if it worked.

Last night I acquired the drill & charger on the right.

Put them all together tonight & I've acquired a Bosch 24v sds drill & charger working perfectly plus 2 working batteries that still hold some charge.

Batteries will need some refurbishment but one managed 2 x 18mm holes through a 6" concrete block so it will be fine for small holes as it is.

I have a similar one but is an Hitachi DH 36 DAL
Got it for free ,my friend gave me it because he works in an assistance ,he repair tools and the one he cannot repair becomes mine ,simple

 

[Dieselman 63]

A Burnerd three jaw for my Graduate lathe, and the plaque too. The chuck came with both sets of jaws, and the key. Got them off G&M, not cheap but spares for these machines are getting hard to find now.