Today I acquired...........

[angellonewolf]

Today I aquired a discount of something in my ebay watch list.. was 68 when I added it, now £45!! Sods law I bought a slightly more expensive one two weeks ago!

^^^been there done that otherhalf wanted a new toaster looked around none cheap

ended up in a shop seen a 2 slot toaster for £17 reduced from £35 cheacked price its a good price not cheaper any where else so bought

6 days later went in to a shop a 4 slice toaster £15 on offer 3 year warrenty

 

[Olderisbetter]

Why the electrical connection, then?

Yes as angellonewolf spotted it gives you cig socket adaption but i am going to adapt it to USB charge points and plug it in under the van seat so i can remove it and have less wire in the cab.

 

[Anguz]

After a few years of using a wooden home made drinks holder in the van i found this in a van just dumped because the owner found a better one.
View attachment 234800

didnt know you can buy one..... have always made my own

 

[The_Yellow_Ardvark]

Still to dig out of the pile is a Centec 2, a J&S arbor press, a nice vice stand with a No.3 on it, and No.2 fly press with tooling.

View attachment 234498

This little saw was buried in a corner and makes up for my lack of room for a lovely Q&S that I just couldn't bring myself to come away with.

View attachment 234499

View attachment 234500

This brand new 8" grinder is a rather poor substitute for a Union Jubilee 10" that I could have had, but just don't have space for. And yes, I do have the guards.

View attachment 234501

View attachment 234502

View attachment 234503

Aro spot-welder.

View attachment 234504

And finally, some weird granules that started leaking from the bottom of the Mig. I can only assume that somewhere along the line my friend put some silica gel inside to keep things dry.

View attachment 234497

That Clarke bench grinder is a nice bit of kit.
I have one.
The only thing that failed on it in 25 years was one side of the double pole On/Off switch. But Clarks sent me out one FOC.

I have a wire brush on one side and a Medium grit stone on the other.

The Draper parts washer, again good bit of kit.
I use Jizzer in mine. The pump can be striped and cleaned and the nozzle is rigid enough to stay in one place, yet be easy to move.

Finds like that are hard to find.

 

[Seadog]

I just need to enlarge the workshop now. That's going to be a major exercise, once the weather improves and holds, and once I can get materials.

The washer is going to come in very useful, but sad that I'm getting this stuff from my friend's estate.

 

[eLuSiVeMiTe]

After a few years of using a wooden home made drinks holder in the van i found this in a van just dumped because the owner found a better one.
View attachment 234800

Still on my mk1 timber holder.
Keeps my paperwork organised too though

 

[eLuSiVeMiTe]

Today I aquired a discount of something in my ebay watch list.. was 68 when I added it, now £45!! Sods law I bought a slightly more expensive one two weeks ago!

I always add things I want to my basket. Amazing how many offers you get sent when you sit on it for a week

 

[The_Yellow_Ardvark]

I just need to enlarge the workshop now. That's going to be a major exercise, once the weather improves and holds, and once I can get materials.

The washer is going to come in very useful, but sad that I'm getting this stuff from my friend's estate.

It is sad, but they are going to be used by some one who will use them and look after them.

 

[Olderisbetter]

didnt know you can buy one..... have always made my own

I think it is a truckers thing as he is a HGV driver so maybe something he got from a truck stop place.

 

[slim_boy_fat]

but sad that I'm getting this stuff from my friend's estate.

And you'll remember him fondly every time you use them, so it's not all bad.

 

[MattF]

Postie dropped this through the letterbox today courtesy of @Brad93

Bob

View attachment 234644

Couldn't you find anything bigger?

 

[Kayos]

The final piece of my camera setup, courtesy of @doubleboost

Modified base plate, means I can change the battery without stripping it down, saved a bit of weight and I can put a smaller lens on without the base plate sticking out

 

[Pigeon_Droppings2]

The busted wheel barrow I found in the allotment skip lives again...ok I did get very carried away with this one!

Same skip had 4 perfectly good table legs...were almost the right size for the cross bracing...once I made them oval they fit perfectly.

After all that effort I had to treat it to a new set of matching black handle covers to complete the transformation.

Unfortunately it seems that someone on the allotment has sticky fingers...my last barrow got stolen....so this one is going to be chained to the floor on a buried anchor!

 

[Seadog]

The perils of eBay when you've had a few drinks

But it was only £72 and just around the corner. Better still, when I picked it up this morning the chap gave me a service kit that he'd bought for it

The wrong one for this model, but just right for the smaller Bambi that I have. To buy the kit, £100

In effect I've got a compressor for nothing and a service kit for a knock down price. The guts from the compressor will be put into my other Bambi project to restore that to its original spec.

 

[Olderisbetter]

After my van centre console upgrade i put the old home made one on the trolley at the end of my drive thinking a local might make use of it it.. it was out there all day lol... but a mate spotted it and gave me a cold/hot box that sits on the centre seat..

This is the old console

 

[Olderisbetter]

A late delivery of a smart charger but I got it on a battery to test it out.

 

[eLuSiVeMiTe]

Beats watching EastEnders.

Waiting for the last critical part. The main sequencer then I'm computer free for a while.

Unfortunately the top synth is going to have to go back. Bought sh and filter 1 won't trigger with midi in. Can patch it for a test but reduces my patching options

 

[Arc Tourist]

Beats watching EastEnders.

View attachment 235025

 

[eLuSiVeMiTe]

Finally put something I aquired a few years ago to use @Seadog

 

[Kayos]

Beats watching EastEnders.

View attachment 235025
Waiting for the last critical part. The main sequencer then I'm computer free for a while.

Unfortunately the top synth is going to have to go back. Bought sh and filter 1 won't trigger with midi in. Can patch it for a test but reduces my patching options

Somewhere in the depths of storage I had a huge trs loom/snake, patch panel and some other bits, planned to offer them to you.
Went to the storage today and the loom has been eaten by something at one end and the patch panel is nowhere to be seen.
At least its pushed me to sort my storage situation out