- Thread starter monkeymark
- Start date
brewdexta
The biggest tool in the box
- Messages
- 5,752
- Location
- UK
An IP camera in the new poultry shed
Somehow I don't think I will put it on line with that camera name, we may get a few disappointed visitors
The shed is a bit small for the camera lens but it will do for now, it is one of those relatively cheap 4 PoE camera/1TB recorder kits. Over time I'll get decent cameras and probably record to a NAS or better dedicatedrecorder but we needed something quick last year so it did the trick.
Somehow I don't think I will put it on line with that camera name, we may get a few disappointed visitors
The shed is a bit small for the camera lens but it will do for now, it is one of those relatively cheap 4 PoE camera/1TB recorder kits. Over time I'll get decent cameras and probably record to a NAS or better dedicatedrecorder but we needed something quick last year so it did the trick.
Olderisbetter
Member
- Messages
- 3,980
- Location
- Wolverhampton
Only just unpacked all of the weeks bits from the van fully, speakers and an amp already gone to a lad who will male good use of them.
more old metal bits and gardening tools
A very strong plastic tub on wheels big enough to get an engine block in to clean
3 pallet trucks
A cooler/ heater for the van
And a small oak cabinet
more old metal bits and gardening tools
A very strong plastic tub on wheels big enough to get an engine block in to clean
3 pallet trucks
A cooler/ heater for the van
And a small oak cabinet
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
I've been cleaning the little plane that I got in the box of freebies and a free DW 100 band saw.
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Apologies , the saw was a close up , I was taking it apart but it's a good 'un now.
I acquired an Airsporter rb type as opposed to a tap loader , paid , not free : )
I acquired an Airsporter rb type as opposed to a tap loader , paid , not free : )
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,245
- Location
- Going Away.
This week I have acquired a few items. But due to the fact I lost (Misplaced) the camera battery charger. It has taken until now to upload the images.
First off all a big thank you to @barking mat and @MikeBB1970 for the items they sent to me. As @barking mat parcel arrived first.
Gasket sheet, and a note.
But @MikeBB1970 came with 2 items.
BUBBLE WRAP!!!!!!!!!!!!!
Oh yes, a decent Fret Saw.
Thanks to the 2 good members.
My neighbour has taken over an allotment, with a small shed. He is keeping the tools and I snaffled a few useful bits.
Some rough sawn hard wood, that is about 1/8th of the total.
A plastic saw handle. It has a nice feel to hold and should be good to use. But the finish needs to be finished.
Not sure what will happen to it.
A "Space Age" looking motorist torch.
It does work and the top does flash.
Takes 2 x D cell batteries. Looks phallic.
A Paraffin Rail lamp.
It is in a poor state or repair, not complete and has been previously, badly, restored.
A bit of work.
First off all a big thank you to @barking mat and @MikeBB1970 for the items they sent to me. As @barking mat parcel arrived first.
Gasket sheet, and a note.
But @MikeBB1970 came with 2 items.
BUBBLE WRAP!!!!!!!!!!!!!
Oh yes, a decent Fret Saw.
Thanks to the 2 good members.
My neighbour has taken over an allotment, with a small shed. He is keeping the tools and I snaffled a few useful bits.
Some rough sawn hard wood, that is about 1/8th of the total.
A plastic saw handle. It has a nice feel to hold and should be good to use. But the finish needs to be finished.
Not sure what will happen to it.
A "Space Age" looking motorist torch.
It does work and the top does flash.
Takes 2 x D cell batteries. Looks phallic.
A Paraffin Rail lamp.
It is in a poor state or repair, not complete and has been previously, badly, restored.
A bit of work.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,245
- Location
- Going Away.
That plane should take a decent edge and can be used on modern plastic as well as wood.
The band saw, if fitted with a narrow blade will cut nice tight curves.
I had forgotten that gun - and what a beauty - much nicer than the German stuff!
Iain Westland
Member
- Messages
- 1,115
- Location
- Bury
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Will definitely do up the plane Ardvark , it's already quite sharp ,.but well pleased with the band saw . WD40 shifted the motor and it will be used as a saw , not really fussed about using the little disc sander.
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
I have a collection but no Germans ,eg: weirhauch , I have a 70's Diana mod27 but it's the UK made one , made when Diana machinery all went to Britain as 'war rep'
I'm pleased the Airsporter is a rotary breech and not tap loading , it's pretty good on open sights, looks good that way too. I won't be scoping it.
- Messages
- 17,663
A sweet little Sony mini system for the shed for just £15 
Never had a minidisc player before, didn’t even notice it was one, I thought it was a cassette player until I picked it up. I thought I’d buy a few discs to play with.... then saw how much they cost!
Anyone got any they want to part with?
Never had a minidisc player before, didn’t even notice it was one, I thought it was a cassette player until I picked it up. I thought I’d buy a few discs to play with.... then saw how much they cost!
Anyone got any they want to part with?
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Wife likes the torch : z
Iain Westland
Member
- Messages
- 1,115
- Location
- Bury
think mine would too, as long as I can get a mains lead on it
Olderisbetter
Member
- Messages
- 3,980
- Location
- Wolverhampton
I didn't know Anne Summers sold a torch
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,245
- Location
- Going Away.
It is just a torch from the 1950's
