Olderisbetter
Member
- Messages
- 3,927
- Location
- Wolverhampton
Today i acquired the ability to be up and about again after food poisoning last week, we had a lovely few days away then ate from a local take away that has changed hands
- Thread starter monkeymark
- Start date
17x worth their weight in gold collets (pratt burnerd I believe) for £100, can't believe nobody bid on them
Friend thinks he has a suitable chuck somewhere in his collection so grabbed them mostly for him but if he doesn't then here/ebay they go!
*edit - one has EE8 on it so I'm guessing it's an EE series unless anyone knows anything more about them.
And some slip gauges for £85 for said friend.
Friend thinks he has a suitable chuck somewhere in his collection so grabbed them mostly for him but if he doesn't then here/ebay they go!
*edit - one has EE8 on it so I'm guessing it's an EE series unless anyone knows anything more about them.
And some slip gauges for £85 for said friend.
Last edited:
dieselsamurai
Too many projects not enough time!
- Messages
- 1,482
- Location
- Hampshire
Little trip to the Isle of Wight for these i had a job to do over there anyway so didnt have pay the £100 return trip cost 
I didnt really have the spare cash but for £200 i couldnt really let it all go was on my wish list for the Bridgeport
Lady i bought it from was clearing an industrial unit sold the Bridgeport but missed this lot until found in a cupboard
first up a 90degree spindle drive looks almost new
plus the ram support and spindle
Icing on the cake was what looks like an unused No4 right angle attachment , takes N-2 collets that are like rocking horse poo unfortunately
Might not use it often but really could pass it by
I didnt really have the spare cash but for £200 i couldnt really let it all go was on my wish list for the Bridgeport
Lady i bought it from was clearing an industrial unit sold the Bridgeport but missed this lot until found in a cupboard
first up a 90degree spindle drive looks almost new
plus the ram support and spindle
Icing on the cake was what looks like an unused No4 right angle attachment , takes N-2 collets that are like rocking horse poo unfortunately
Might not use it often but really could pass it by
Kram
Member
- Messages
- 7,981
- Location
- Sussex
Clone of an Echo cs2511 and brushcutter.
Side by side, its not identical, slightly louder but same engine design/character. I may be mistaken but it feels more powerful - but thats likely from the more open exhaust. I like it! Will give it a proper try tomorrow.
Dislike - bar nut retainging clips not included, and just standard bar nuts, it uses two of them.
Like - the on/off switch is a momentary, auto return to on switch. All saws should be this way.
3/8 full chisel chain as standard!
The 12" bar I'll swap to the Makita to test that. I've put the 10" Echo bar and 3/8 full chisel on the Clone 2511 for testing tomorrow. 12" may be too long for this size saw I think, atleast for what I intend to use it.
The clone also fired up first pull. Very easy start.
Last edited:
Memmeddu
Member
- Messages
- 5,445
- Location
- Italia Sardegna
Airsoft lot on ebay I've highjacked the auction before starting
Let's start with an M18 Claymore
Utility pouches, a bag, mag pouches, jumbo 1 point sling, fast mag extractor.
Rails, rail covers, mag pouches, angled grip, jumbo sling
Suppressor, mask (will be sold), I think they are leg holsters, goggles.
Inner barrels, sling, masks, goggles, forgrip, fast mag pouch and extractor, flash hiders.
Magazines, AK ones to be sold.
X-cortex chronograph
Bargain price.
I'll probably get a profit too
Let's start with an M18 Claymore
Utility pouches, a bag, mag pouches, jumbo 1 point sling, fast mag extractor.
Rails, rail covers, mag pouches, angled grip, jumbo sling
Suppressor, mask (will be sold), I think they are leg holsters, goggles.
Inner barrels, sling, masks, goggles, forgrip, fast mag pouch and extractor, flash hiders.
Magazines, AK ones to be sold.
X-cortex chronograph
Bargain price.
I'll probably get a profit too
Blobber
Forum Supporter
- Messages
- 3,285
- Location
- lincolnshire
Are you expecting an invasion/war?!
Memmeddu
Member
- Messages
- 5,445
- Location
- Italia Sardegna
"War is coming here" citAre you expecting an invasion/war?!
It was the ammunition seller way to say goodbye in Grand theft auto San Andreas
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,262
- Location
- Going Away.
He has stated in the past he has Oil.Are you expecting an invasion/war?!
Memmeddu
Member
- Messages
- 5,445
- Location
- Italia Sardegna
You can easily make a collet chuck for them.17x worth their weight in gold collets (pratt burnerd I believe) for £100, can't believe nobody bid on them
Friend thinks he has a suitable chuck somewhere in his collection so grabbed them mostly for him but if he doesn't then here/ebay they go!
*edit - one has EE8 on it so I'm guessing it's an EE series unless anyone knows anything more about them.
View attachment 499106
And some slip gauges for £85 for said friend.
View attachment 499107
Essentially a cylinder with an inside taper and threaded end of a big custom nut that pushes against the collets
Blobber
Forum Supporter
- Messages
- 3,285
- Location
- lincolnshire
Weetabix! You might as well eat the hoover box
dobbslc
Forum Supporter
- Messages
- 13,169
- Location
- Hertfordshire UK
Blobber
Forum Supporter
- Messages
- 3,285
- Location
- lincolnshire
Nice, what's it out of?
