OLEDs can suffer screen burn. If they are left on the same news channel with a logo in the same spot 14hrs a day for 2 yrs!
In normal use no chance.
Most high end phones are oled.
- Thread starter monkeymark
- Start date
In normal use no chance.
Most high end phones are oled.
Pigeon_Droppings2
Member
- Messages
- 6,545
- Location
- london
Yea but I've learned my lesson with TVs....I was one of the first people to buy a 55 inch Sony LED TV back in the day....it cost a fortune but came with an impressive 5 year warranty. After 7 years it went bang...wasn't worth fixing because prices had dropped so much. Replaced it with a 55 inch Samsung....at the time they were trying to sell me 4K but there wasn't any content so I waited and just bought the cheaper model.
Just switched to 4k...4 years later now theres content. The netflix optimisations for the Samsung are really impressive....and the UHD (or whatever they call it) equally impressive...I may have to watch lost in space all over again!
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
I see your hammer of metal and wood.
I raise you.
A Mallet of rubber, glass and fibre.
@Parm
Tis a mallet, not a hammer.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
^^^^^^^^^^^^^^^^^^^^
I also got this.
1/4" grease nipples, grease gun connections and some plasters.
But.
Wait.
There is more.
@Mr Grumpy friend. Weld your broken one up.
I also got this.
1/4" grease nipples, grease gun connections and some plasters.
But.
Wait.
There is more.
@Mr Grumpy friend. Weld your broken one up.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
New toy.
@Olderisbetter
Il post up a review next week.
12 oak veneered doors to swing so will put it through it's paces
@Olderisbetter
Il post up a review next week.
12 oak veneered doors to swing so will put it through it's paces
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
No free lawn mowers.
But free food.
Even the drink is sugar free.
@slim_boy_fat .
See no need for me to need more sugar.
I am sweet enough. As I already told you.
But free food.
Even the drink is sugar free.
@slim_boy_fat .
See no need for me to need more sugar.
I am sweet enough. As I already told you.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
First test and seems ok. Need to take a file to the locating lugs on the trimmer base. Doesn't slide in easily
Plenty of power 6mm straight cutter happily ploughing through oak with a 15mm doc no sign of struggles
It's quieter than it's mains counterpart and stops dead when you hit the switch
Despite the battery weight it's easy to use freehand too.
Haven't tried the plunge base but had a fiddle and works well.
Time to relegate my old Hitachi trimmer to the shed.
The katsu I bought isn't nice to use. It's top heavy and doesn't have enough guts
Olderisbetter
Member
- Messages
- 3,936
- Location
- Wolverhampton
I will look forward to the full review as i have been looking out for one at the right price but it is my birthday tomorrow so i might be waking up to one if the hints i have dropped have been picked up on.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
First impressions are very good. Cost 300 bare in a Tstack. Looking forward to using it for door fitting but also for all those little things I normally cba dragging transformers and leads out for a 1 minuite job .
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
And like you I've been waiting a while for this one .price hasn't really dropped so bit the bullet
Extractor with a long hose 18v planer and router should make my doors a lot easier.
Extractor with a long hose 18v planer and router should make my doors a lot easier.
Olderisbetter
Member
- Messages
- 3,936
- Location
- Wolverhampton
I have quite a few 18v dewalt tools so this is going to be a nice addition, What is a the "Extractor with long nose" ? I had a 240v bosch router but it died last year so i have been using my mates for ages and i think he might like it back.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Hose. Spell checker error. My hose is about 10m long. Means I don't have to have the extractor in the room I'm working in. Better on my ears but useful when I'm working in several rooms too.
No shortage here
Old Hitachi laminate cutter. A small trend. A big Hitachi m12 v1 and v2 a katsu and now this. Some of them I've never used but there destined for router tables
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
DUCK!!!!!!!!!!!!!!!!!!!!!!!!!!
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
No.
Really.
DUCK!!!!!!!!!!!!!!
Really.
DUCK!!!!!!!!!!!!!!
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,331
- Location
- Going Away.
Well. The other day.
But I lost the lead to attach the phone to the lap top.
F.J.
The least I know, the least i am responsible for
- Messages
- 1,845
- Location
- England
Picked these up yesterday off a customer who was throwing them out!!
They have bought out another business and going through the stuff the don’t need and said I could have whatever I fancied!
The jack just needs a piston for the oil block, just tried Sealey but they are closed until Monday!
The ram had recently been resealed but a customer hiring the machine managed to snap the front eye off the rod, I’ll be using this to make a log splitter
the torque wrench was simply put in the bin because they couldn’t be bother sending it to be calibrated. I’ve just arranged to drop it off next week!
bonus!
They have bought out another business and going through the stuff the don’t need and said I could have whatever I fancied!
The jack just needs a piston for the oil block, just tried Sealey but they are closed until Monday!
The ram had recently been resealed but a customer hiring the machine managed to snap the front eye off the rod, I’ll be using this to make a log splitter
the torque wrench was simply put in the bin because they couldn’t be bother sending it to be calibrated. I’ve just arranged to drop it off next week!
bonus!
arther dailey
Member
- Messages
- 6,906
- Location
- England
Those are cracking ,well done hate seeing good kit go to tip
F.J.
The least I know, the least i am responsible for
- Messages
- 1,845
- Location
- England
I asked if they had a valve block, pipes, motor and a pump for my log splitter, they said I was taking the p***!!!Those are cracking ,well done hate seeing good kit go to tip
arther dailey
Member
- Messages
- 6,906
- Location
- England
how very selfish of them
