- Thread starter monkeymark
- Start date
8ob
Member
- Messages
- 14,487
- Location
- Nescient in the vale
Today I acquired a Shaper and as a Brucie bonus a small surface grinder, all @Johnnybravo ’s fault.
Never heard of it
Never heard of it
Jaeger_S2k
Forum Supporter
- Messages
- 791
- Location
- Highfurlong, Blackpool. Lancashire
No, not Fusion, been there and broke my brain. Then I found this guy MangoJelly Solutions for FreeCAD.
FreeCAD V1 is out, and it's caught up with the big boys, don't ask me in what way, I know nuffing!
He's got me really comfortable looking at the complexity of FreeCAD.
It's FREE too, I even joined his Patreon, and I don't do that often.
It's definitely worth spending some time with him, I find the details that everyone else misses/skips over, he doesn't.
Rather good at what he does.
Jaeger_S2k
Forum Supporter
- Messages
- 791
- Location
- Highfurlong, Blackpool. Lancashire
Was a while ago, but let me introduce you to this little fella'.
Listed on Faceache, free to good home. Quickly messaged and asked if I could have it, yes!
When I got there, lovely lady says “It's in the garage, I hope you can lift it?”
It's quite a heavy chappie!
Ball Pin for reference.
Quick release works as it should and all it well, just needs a BIG bath for getting it cleared of rust and ready for paint.
Got it, no I dragged it along the floor of the caravan, onto a trolley to bend and straighten some pegs to hang my oily chain hoist parts on.
Can't get to the bench with the bench vice on it, this did the job. I'll pop over to the vice thread and get it catalogued.
£5 finger file with some belts, got it together with metal back boxes (50 off), down light junction boxes 12off and a set of Augers for hinges (screwfix branded) £20 the lot. Just needs cleaning up, runs quiet and variable speed.
Listed on Faceache, free to good home. Quickly messaged and asked if I could have it, yes!
When I got there, lovely lady says “It's in the garage, I hope you can lift it?”
It's quite a heavy chappie!
Ball Pin for reference.
Quick release works as it should and all it well, just needs a BIG bath for getting it cleared of rust and ready for paint.
Got it, no I dragged it along the floor of the caravan, onto a trolley to bend and straighten some pegs to hang my oily chain hoist parts on.
Can't get to the bench with the bench vice on it, this did the job. I'll pop over to the vice thread and get it catalogued.
£5 finger file with some belts, got it together with metal back boxes (50 off), down light junction boxes 12off and a set of Augers for hinges (screwfix branded) £20 the lot. Just needs cleaning up, runs quiet and variable speed.
Looks very much like a makita 9032, fantastic tools and a great price!
Memmeddu
Member
- Messages
- 5,584
- Location
- Italia Sardegna
372xp?
Memmeddu
Member
- Messages
- 5,584
- Location
- Italia Sardegna
Got few things in the mail
V2 FPS piston head and spring, lonex dampened cylinder head for my ICS M4A1
You can see the air group beneath the parts
EOTECH replica from AliExpress
I've already installed the protective screen on the front lense
Meant to be installed on this evening but other things to do so ....
V2 FPS piston head and spring, lonex dampened cylinder head for my ICS M4A1
You can see the air group beneath the parts
EOTECH replica from AliExpress
I've already installed the protective screen on the front lense
Meant to be installed on this evening but other things to do so ....
JOEPRO
Member
- Messages
- 5,008
- Location
- UK
Yes vet bills are just truly Bananas aren't they. Every time my German shepherd breaks wind it's £250.
Utter disgrace is what it is. Animal care should be affordable for all and not extortionate pricing for tablets.
Kram
Member
- Messages
- 8,114
- Location
- Sussex
Holtzfforma clone 372xp. The cyl is not worn out but where I didnt tighten exhaust properly, my own fault, it got loose on one bolt then threads stripped. Without a gasket, kept happening but had to finish the job. I will helicoil it and keep as spare.
zzr1200
Working at 650 ft on open steel work.
- Messages
- 6,479
- Location
- Glapwell, Chesterfield, Derbyshire, UK
How do they compare with the original quality, power and reliability?
I'm considering looking at a 395xp copy.
PS: Meteors' good gear, almost oem standard
addjunkie
Member
- Messages
- 14,101
- Location
- Northumberland. Reet oot in the sticks
To be honest the consultation and bloods dont look too bad. But what is all the other stuff….many drugs can be bought on line for animals with a prescription from the vet.
badabec
Forum Supporter
- Messages
- 2,467
- Location
- Essex UK
The Samylin looks a complete rip off for a food supplement.
Truly independent vets are few and far between these days.
"Collet set" advertised on Facebook. After some close examination of the seller's two photos below I noticed they were marked 6K. The are like hen's teeth here and fit my Southbend 10K lathe and drawbar. Result.
Nice original leather South Bend box. This wasn't in the sale photos.
Picked up some MT3 collets for my Marlow mill too and the seller threw in an MT3 Jacobs chuck and some small milling clamp bits. Very pleased.
Nice original leather South Bend box. This wasn't in the sale photos.
Picked up some MT3 collets for my Marlow mill too and the seller threw in an MT3 Jacobs chuck and some small milling clamp bits. Very pleased.
Jaeger_S2k
Forum Supporter
- Messages
- 791
- Location
- Highfurlong, Blackpool. Lancashire
Gently blow some air down the sides, and I mean just waft the blowgun towards the top and bottom edge.
You'd be surprised, it might just rise like a lift and expose the original condition.
Well that is one hell of a markup for the Samylin. Normally a pack of 30 would come in around £70
Samylin Tablets (pack of 30)
Samylin is made to a trusted formula to support the liver in a range of functions, for example to support the liver when it is processing medication.
hyperdrug.co.uk
