I've got some of them but not the ones like that. The flat ones. Ideal for bending lips or flattening edges on sheet. The tool goes by the name of "the flattners" for me.
- Thread starter monkeymark
- Start date
My first hit under Google:
WARWICK 592 SHEET METAL EDGE JOGGLER/FINISHER/SETTER | #275372677
WARWICK 592 SHEET METAL � EDGE JOGGLER/FINISHER/SETTER WARWICK 592 SHEET METAL � EDGE JOGGLER/FINISHER/SETTER WARWICK 592 SHEET METAL � EDGE JOGGLER/FINISHER/SETTER WARWICK 592 SHEET METAL � EDGE JOGG
www.worthpoint.com
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
A new angle grinder. A musical tape measure, stuck on full volume, I couldn't turn it down, 50 pence.
A temperature controlled soldering iron.
A temperature controlled soldering iron.
Mart63
Member
- Messages
- 499
- Location
- Essex, Uk
In have a Yihua 937d+ at work and it's excellent.
Hood
I am obsessed.
- Messages
- 17,778
- Location
- Carnoustie, Scotland
For a line like that you should be, as my American friend would say, covered in $hit and shot for stinking.
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,970
- Location
- Sevenoaks, UK
Because it was stuck on full volume or because it was so cheap?
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
Both
MikeBB1970
Member
- Messages
- 189
- Location
- Hayling Island UK
They're good, stops corrosion.
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
Adapt it to your recharchable tool platform and refit one of your powertools with blown up gas engine with it!
MattF
Forum Supporter
- Messages
- 17,894
- Location
- South Yorkshire
Memmeddu
Member
- Messages
- 5,540
- Location
- Italia Sardegna
DAPPH
as dyslexik as I'm daft
- Messages
- 7,489
- Location
- Near to Cross Hands Llanelli SouthWales GB
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
Today I have re-acquired faith in statements made by a tool manufacturer:
Shortly after buying the already presented straight grinder ...
... I had discovered the "free battery promotion" from Metabo for cordless devices purchased between 01.09.2022 and 31.12.2022 of certain criteria and registered the straight grinder.
The battery arrived a few days ago:
The design has since been revised somewhat, but everything fits of course unrestricted in the system.
And because I am a good customer I let the promotion work on me and went in search of eligible devices that I am still missing and for which I have a real purpose ....
... I would have always found a cordless heat gun practical, but had so far refrained from buying one, because the pure conversion of electrical energy into heat by sheer let-current-flow with this intelligent form of energy did not seem to be a well use and on top of that completely unsuitable for battery.
But what do I care about my smart speeches from yesterday ... again without battery, but this time with a system case:
The operation of the temperature control looks like more than it is:
The bidirectional momentary switch alternates between two states, warmer and colder;
as it seems, the temperature is measured near the discharge opening and the lower temperature is reached by increasing the fan speed
- this will be important later with the accessories.
As far as I could find out by playing (who reads instruction manuals?).
The box came with two handy accessory nozzles: 1. for shrinking and melting tubes; 2. for co-centering the jet and base for other accessories.
Notes with the nozzles say to use only with temperature controlled heat guns!
As soon as the heat gun was in the house, I also registered this device ..... today came the second battery ....
... and both fit very nicely in the system box.
... now I have to see which battery tools I am still missing ....
Carsten
--
Shortly after buying the already presented straight grinder ...
... I had discovered the "free battery promotion" from Metabo for cordless devices purchased between 01.09.2022 and 31.12.2022 of certain criteria and registered the straight grinder.
The battery arrived a few days ago:
The design has since been revised somewhat, but everything fits of course unrestricted in the system.
And because I am a good customer I let the promotion work on me and went in search of eligible devices that I am still missing and for which I have a real purpose ....
... I would have always found a cordless heat gun practical, but had so far refrained from buying one, because the pure conversion of electrical energy into heat by sheer let-current-flow with this intelligent form of energy did not seem to be a well use and on top of that completely unsuitable for battery.
But what do I care about my smart speeches from yesterday ... again without battery, but this time with a system case:
The operation of the temperature control looks like more than it is:
The bidirectional momentary switch alternates between two states, warmer and colder;
as it seems, the temperature is measured near the discharge opening and the lower temperature is reached by increasing the fan speed
- this will be important later with the accessories.
As far as I could find out by playing (who reads instruction manuals?).
The box came with two handy accessory nozzles: 1. for shrinking and melting tubes; 2. for co-centering the jet and base for other accessories.
Notes with the nozzles say to use only with temperature controlled heat guns!
As soon as the heat gun was in the house, I also registered this device ..... today came the second battery ....
... and both fit very nicely in the system box.
... now I have to see which battery tools I am still missing ....
Carsten
--
25.4_mechanic
Member
- Messages
- 1,046
- Location
- Germany, southwest
You're asking me?
Not so much watching my own output .... why you're asking?
Carsten
--
