Today I acquired...........

[DennisCA]

I bought an oscilloscope:

 

[MysterG]

I found this in the workshop under a pile of tools, offcuts, nails, grinding dust, a granite ball (!), some wood, some wires, and a couple of tubs of come in handy one day screws.
I'm not sure what it is, but I reckon it'll come in handy

 

[Olderisbetter]

I found this in the workshop under a pile of tools, offcuts, nails, grinding dust, a granite ball (!), some wood, some wires, and a couple of tubs of come in handy one day screws.
I'm not sure what it is, but I reckon it'll come in handy

View attachment 311982

Pretty sure i have seen one before, i miggt do hunting

 

[zeppelin builder]

ducati 1100ds monster rear top end
thought id get one whilst there going cheap

 

[Mick Annick]

I found this in the workshop under a pile of tools, offcuts, nails, grinding dust, a granite ball (!), some wood, some wires, and a couple of tubs of come in handy one day screws.
I'm not sure what it is, but I reckon it'll come in handy

View attachment 311982

Have you got the Metalcraft bender to go with it?

 

[MysterG]

Have you got the Metalcraft bender to go with it?

Stuff you have made today

I got the tool post base drilled and fitted. The handle is not attached yet, but Im thinking a 3 o'clock position at a slightly higher angle wont interfere with the qc handle. I have no flat surfaces in the shed so needed to find a home for this 12v power supply. Use it for many things, mostly...

www.mig-welding.co.uk

 

[zeppelin builder]

was looking for a small lathe hardinge or similar , but got dismayed as most were robbed of their ancilleries
so went for a mid range foreign one
38mm spindle bore 28 "bc 5mt x3mt tail chucks are proper proper pin lock type and 1.75 kw inverter control motor . power x feed and dro
also bought a mill too r8 spindle and dro and a barrow load of tooling

 

[The_Yellow_Ardvark]

YIPEEEEEEEEEEEE.

Some one has found a way to heart.
A thank you for some work I did.

But, again the credit goes to 2 members here who donated the raw materials.

To the Grumpy one.

MINE.



A bit of beer, doooooombar and a Pifco lantern.

 

[JEZGUZ]

I'm wondering what bottom end the Ducati top end is going to be grafted on to? Please do a build thread if you decide to create something.

 

[James1979]

One of my ex neighbours. Well half of one anyway!

I let the rest stay there rent free so it was a nice thank you.

 

[The_Yellow_Ardvark]

One of my ex neighbours. Well half of one anyway!

Nice job getting them to fit in those bags.

 

[James1979]

Nice job getting them to fit in those bags.

Take the wool off first.

 

[zeppelin builder]

I'm wondering what bottom end the Ducati top end is going to be grafted on to? Please do a build thread if you decide to create something.

i already have the norton 660 es2 with a ducati bevel cambox on it
did it the hard way
but i might make a mk2

 

[Dr.Al]

Some wood:

for a simple planter; build thread here: https://www.mig-welding.co.uk/forum/threads/wood-bothering-chunky-planter-build.116166

 

[vw-al]

4m euro torch and socket for my machine

 

[cardiffrob]

Acquired a CZ455 Varmint rifle in .22 with a Walnut stock, Bushnell scope and a Moderator. 2 x 10-round mags came with it, too. All from the sale of the guns owned by one of the club members who nipped into hospital for a check-up and never came out. Plod were all for taking the lot for destruction until someone stepped in to sell the guns on behalf of his family. Raised nearly £4000 so far.

Happy trails, Carl.

 

[Dr.Al]

A new light as my inspection lights both had very dead batteries:

 

[MattF]

A new light as my inspection lights both had very dead batteries:

View attachment 312131

Cracking bit of kit are those.

 

[The_Yellow_Ardvark]

Take the wool off first.

Why were they dressed as a sheep?

Odd people above the A303.

 

[lchris21]

i already have the norton 660 es2 with a ducati bevel cambox on it
did it the hard way
but i might make a mk2

any pictures of this?.....sounds interesting