Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
Like tools and welding equipment ?
- Thread starter monkeymark
- Start date
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
Due to a customer not wanting their pre booked work done, I was done early for work. So a slow bimble home and that allowed me to see a good place to mouch around.
This is what I "acquired".
A sorry and in need of a TLC a Record 52. 1/2 wood working vice.
It does move, but is stiff.
A Dremmel type tool, a odd clamp and a Tilly lamp pre warmer.
No idea if the Dremmel works, yet.
A nice old tin.
A nice bit of history.
This really does need a whole lot of love.
Oh, the tin?
Yes it did.
This is what I "acquired".
A sorry and in need of a TLC a Record 52. 1/2 wood working vice.
It does move, but is stiff.
A Dremmel type tool, a odd clamp and a Tilly lamp pre warmer.
No idea if the Dremmel works, yet.
A nice old tin.
A nice bit of history.
This really does need a whole lot of love.
Oh, the tin?
Yes it did.
dobbslc
Forum Supporter
- Messages
- 13,294
- Location
- Hertfordshire UK
Picked up my new van this morning 
Vauxhall Combo Sportive with 4 miles on the clock!
Finally got rid of that POS Renault Kangoo!!!
Everything about this van is better, from the one touch electric windows to the engine spinning at over 1000RPM less at motorway speeds.
It's a Vauxhall so I don't know how reliable it will be yet but it drives nice and has all the gadgets like A/C, cruise control, touch screen with built in sat nav, good DAB radio and hands free phone etc.
Unlike the Renault I don't rip my shoulder joints out just trying to shut the side doors and it's much quieter on the motorway!
Vauxhall Combo Sportive with 4 miles on the clock! Finally got rid of that POS Renault Kangoo!!!
Everything about this van is better, from the one touch electric windows to the engine spinning at over 1000RPM less at motorway speeds.
It's a Vauxhall so I don't know how reliable it will be yet but it drives nice and has all the gadgets like A/C, cruise control, touch screen with built in sat nav, good DAB radio and hands free phone etc.
Unlike the Renault I don't rip my shoulder joints out just trying to shut the side doors and it's much quieter on the motorway!
Unbelievable, you've only had that 2 minutes and someone's already drawn all over it. You just can't leave anything anywhere these days.Picked up my new van this morning
Finally got rid of that POS Renault Kangoo!!!
Blobber
Forum Supporter
- Messages
- 3,401
- Location
- lincolnshire
Except its a Peugeot built under licence by Vauxhall, French design and the superb aftersales service from Vauxhall dealers, sorry it doesn't bode well!Picked up my new van this morning
View attachment 306905
Finally got rid of that POS Renault Kangoo!!!
Everything about this van is better, from the one touch electric windows to the engine spinning at over 1000RPM less at motorway speeds.
It's a Vauxhall so I don't know how reliable it will be yet but it drives nice and has all the gadgets like A/C, cruise control, touch screen with built in sat nav, good DAB radio and hands free phone etc.
Unlike the Renault I don't rip my shoulder joints out just trying to shut the side doors and it's much quieter on the motorway!
dobbslc
Forum Supporter
- Messages
- 13,294
- Location
- Hertfordshire UK
But it's NOT Renault!
Yeah, Vauxhall dealers are **** but so are most!
Mitsubishi excepted, they were very good with our Outlander!
I've had Peugeot Van's before years ago and they were pretty good, slow non turbo engines but ok!
Yeah, Vauxhall dealers are **** but so are most!
Mitsubishi excepted, they were very good with our Outlander!
I've had Peugeot Van's before years ago and they were pretty good, slow non turbo engines but ok!
Dieselman 63
Forklift Certified
- Messages
- 5,853
- Location
- Wellington, New Zealand
Koken nut grip 3/8 sockets. I love Koken, has a quality feel to it and it’s not massively thick-walled like some stuff. These have sprung balls on the inside to hold a bolt. I’m looking forward to using these.
Melvyn Best
Member
- Messages
- 1,837
- Location
- Cambridge
But it's NOT Renault!
But has it got a Renault engine etc like a lot of Vauxhall vans these days?
Nick DV
"That's the only name they ever gave me."
- Messages
- 1,673
- Location
- "A long time ago in a galaxy far, far away...."
I cannot believe the cable is not under the cable clamp!A Philips no3? driver bit, FOC but from an unusual placeneeded a plug so cut one off an old motor I have kicking about. Some people shouldn't be allowed to have tools(note the polarity)!
View attachment 307031
dan.taylor.1
General Tinkererer
- Messages
- 2,786
- Location
- Kendal, Cumbria
There is literally nothing right about that plug wiring...A Philips no3? driver bit, FOC but from an unusual place
View attachment 307031
Maker
Most folk just call me; Orange Joe
- Messages
- 10,633
- Location
- Keeler crater
At least earth is earth.
jerrytug
Member
- Messages
- 1,834
- Location
- Isle of Wight
Just a couple of old books off ebay: they go into minute detail, and practical instructions, on all engineering subjects.
I have acquired for £10 including delivery, basically all the knowlege and skills of the Industrial Revolution which we had accumulated by the 1960's.
I have acquired for £10 including delivery, basically all the knowlege and skills of the Industrial Revolution which we had accumulated by the 1960's.
Blobber
Forum Supporter
- Messages
- 3,401
- Location
- lincolnshire
Nice books, the year I was born as well!
I have a set from 1990 - given to me when I worked at Philip Morris Engineering Services by a guy who's wife worked at the printers - they weren't quite assembled in the right order
Which is about the best thing I can say about them - as an engineering reference I found them totally useless.
Danez
Never late in a V8!
- Messages
- 659
- Location
- Lancashire, England
I have the exact same drill/driver set. done me well over the past couple of years
Bullet2012
Member
- Messages
- 5,365
- Location
- on average about 200 miles from the ISS.
Lovely books.
