MattF
Forum Supporter
- Messages
- 17,886
- Location
- South Yorkshire
- Thread starter monkeymark
- Start date
slim_boy_fat
Member
- Messages
- 29,508
- Location
- Scottish Highlands
Pigeon_Droppings2
Member
- Messages
- 6,545
- Location
- london
Soldering iron tip cleaner arrived...tiny little pot for £10.
I have to say it's bloomin worth it...I want from a carbon covered burned tip to a lovely tinned tip in 2 seconds...amazing stuff.
I have to say it's bloomin worth it...I want from a carbon covered burned tip to a lovely tinned tip in 2 seconds...amazing stuff.
Nick DV
"That's the only name they ever gave me."
- Messages
- 1,673
- Location
- "A long time ago in a galaxy far, far away...."
£10
It's about the size of a button!Pigeon_Droppings2
Member
- Messages
- 6,545
- Location
- london
I know....when it arrived I was very annoyed as I didn't check and thought I was getting a tub of the stuff!!£10
But then I tried it....it bloomin does exactly what it says on the tin! No idea how it works...it's like flux mixed with powdered solder or something. Stick the iron in and it comes out perfectly tinned. I was trying for ages to restore the tip so this was my last attempt. Going to save a lot of swearing....no idea if it can be had for cheaper elsewhere...probably...but I'm happy with how it works
The tip was as burned as the rest of it....no matter what I did it just wouldn't tin properly. This is a single 2 second dip...I'm amazed....how have I never heard of this stuff before!
Nick DV
"That's the only name they ever gave me."
- Messages
- 1,673
- Location
- "A long time ago in a galaxy far, far away...."
And that's all that matters...but I'm happy with how it works
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,328
- Location
- Going Away.
Terrible I know.The stuff people chuck out
A new de-rusting tank just dragged from a skip. No damage to it and a very useful 26" x 17" x 11" - a perfect size for vices.
I had to liberate a TK Max plastic box.
Olderisbetter
Member
- Messages
- 3,936
- Location
- Wolverhampton
Three motors and a starter all 3 phase.
Last edited:
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,328
- Location
- Going Away.
A few items liberated from a site today.
He who asks, gets.
Lots more there, but that's for another day.
3 sets of the 3 different size prickers.
1 French size cup washer.
Jet and NRV valve spanners.
Happy me.
He who asks, gets.
Lots more there, but that's for another day.
3 sets of the 3 different size prickers.
1 French size cup washer.
Jet and NRV valve spanners.
Happy me.
daedalusminos
Member
- Messages
- 2,363
- Location
- Norwich
Another piece of Japanese engineering...
Brad93
Member
- Messages
- 19,098
- Location
- Essex, United Kingdom
That’s nice!
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,679
- Location
- Leeds, West Yorkshire
I've been trying to get rid of the stuff out of my garden for two years: it grows like a weed here, leave a tiny piece of root in the ground, and it's 2ft high in a month.
(I am slap bang in the middle of "the rhubarb triangle")
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
Primus stove tools ?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,328
- Location
- Going Away.
That and now torces.
Maker
Most folk just call me; Orange Joe
- Messages
- 10,633
- Location
- Keeler crater
Following on from the discussion in the ale pump thread, I got some gas. 
I asked my friendly coffee roaster (And avid homebrewer) who he uses for gas, gave them a ring and got by far the best deal I'd found. £50 deposit on the cylinder, £16.20 for the gas, no rental, no environmental surcharge, delivered the next day for free. Can't believe I was debating BOC and Sodastream!
Is it normal for CO2 to have a male thread on the cylinder? I've only ever seen female threads on the bottle and a bullnose on the reg.
@hotponyshoes Was Air Liquide the supplier you were thinking of? Evidently that's where this is from.
EDIT: Got a question about regulators. Welding ones seem to start around the thirty pound mark and beer ones are more like eighty quid and up. Is there a difference? I know beer ones will vent gas from the keg if you turn the pressure up and then back down, I'm pretty sure my argon reg won't do that.
EDIT 2; another reg question; Why do they have two gauges? I thought CO2 was stored as a liquid so the bottle gauge will only vary with temperature until it's almost completely empty?
I asked my friendly coffee roaster (And avid homebrewer) who he uses for gas, gave them a ring and got by far the best deal I'd found. £50 deposit on the cylinder, £16.20 for the gas, no rental, no environmental surcharge, delivered the next day for free.
Can't believe I was debating BOC and Sodastream!Is it normal for CO2 to have a male thread on the cylinder? I've only ever seen female threads on the bottle and a bullnose on the reg.
@hotponyshoes Was Air Liquide the supplier you were thinking of? Evidently that's where this is from.
EDIT: Got a question about regulators. Welding ones seem to start around the thirty pound mark and beer ones are more like eighty quid and up. Is there a difference? I know beer ones will vent gas from the keg if you turn the pressure up and then back down, I'm pretty sure my argon reg won't do that.
EDIT 2; another reg question; Why do they have two gauges? I thought CO2 was stored as a liquid so the bottle gauge will only vary with temperature until it's almost completely empty?
Olderisbetter
Member
- Messages
- 3,936
- Location
- Wolverhampton
Do you put manure on your rhubarb? I Prefer it with custard
