Dieselman 63
Forklift Certified
- Messages
- 5,862
- Location
- Wellington, New Zealand
Proper bargain. Any makers names?
- Thread starter monkeymark
- Start date
Proper bargain. Any makers names?
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,987
- Location
- Going Away.
2 old pliers one countersink bit.
£1, the pliers are rusty but the joint is firm on both. The C/sunk bit is almost new, just rusty.
5 files, yes I know there is only 4 on show. the fifth, a rat tail is safe. Some were safe in the car.
All used, full of rubbish.
Yes, no handles, for now.
Old style insulation tester, if you lived in Trowbridge in the past 1000 years you will recognise the price label.
Ok, I just "Liberated" this sheet metal pin marking gauge from my father in law.
Old wood turned down into new file handles, yes, recycled copper pipe for the ferrules.
Now, excuse me. I need to drink my father in laws beer.
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,683
- Location
- Leeds, West Yorkshire
Not at first glance.
doubleboost
Member
- Messages
- 3,915
- Location
- Newcastle upon Tyne England
It is the 1/2 inch drive hi torque version
THe story of my life!Today I acquired from a skip the same iron pipe fittings I spent 15 quid buying last week.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,987
- Location
- Going Away.
Pain relief from in laws.
Yesterday whilst carrying out some jobs at the Heritage railway I volunteer at I came across this nice bit of kit under a pile of plywood and hidden in a lean to in our back yard.
Its a Bronx geared mechanical press brake. I made an offer on it and it'll be heading to my workshop in the next week or so. Approx. 24" in width, so will be a handy addition in the 'shop.
At the moment it is seized, but plenty of penetrating fluid should get it all free so I can strip it and clean it. The maker's plate is well worn and the position it's currently sitting in makes it hard to get a good look at for more details.
Its a Bronx geared mechanical press brake. I made an offer on it and it'll be heading to my workshop in the next week or so. Approx. 24" in width, so will be a handy addition in the 'shop.
At the moment it is seized, but plenty of penetrating fluid should get it all free so I can strip it and clean it. The maker's plate is well worn and the position it's currently sitting in makes it hard to get a good look at for more details.
seriesonewelder
Member
- Messages
- 678
- Location
- West Midlands
Bronx are still trading, though no longer in the large factory that they were in, in the Lye (near Brierley Hill).
http://www.bronx.co.uk/
http://www.bronx.co.uk/
Hood
I am obsessed.
- Messages
- 17,862
- Location
- Carnoustie, Scotland
Could have traded for a Subaru
Could have traded for a Subaru
Nope but we got it to help with the manufacture process of replica wrc and 22b body panels,
Tinbasherdan
Bodger in chief
- Messages
- 7,507
- Location
- Bolton, England
Good god do I want that
its an absolute cracking bit of kit and I've secured it for what I think is an unbelievably cheap price. No idea what the cost of it would be buying it new, but I offered £100 for it and the offer was gladly accepted.
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 17,986
- Location
- East Yorkshire
Nice, and a good price as well. Bit more tooling and you have a box and pan folder, with a good capacity
Memmeddu
Member
- Messages
- 5,649
- Location
- Italia Sardegna
So this are about two or three weeks ago
View media item 9877I have also other but are not working for the moment so it's garbadge since i repair it, so for the moment
Tomorrow other photos, because now i can't go in my toys room
Ps i not understend, i can post also photo of what i buy or only what i found repair or something like this (are 409 pages i can't read all this :-) )
View media item 9877I have also other but are not working for the moment so it's garbadge since i repair it, so for the moment
Tomorrow other photos, because now i can't go in my toys room
Ps i not understend, i can post also photo of what i buy or only what i found repair or something like this (are 409 pages i can't read all this :-) )
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,987
- Location
- Going Away.
We like photos, and we don't care what of
In that case.
https://newstechnica.com/wp-content/uploads/2009/08/japanese-man-thong.jpg
@slim_boy_fat @Parm Safe for you to look.
Hood
I am obsessed.
- Messages
- 17,862
- Location
- Carnoustie, Scotland
I liked the post but I am not clicking the link as I know how perverted you are
