Today I acquired...........

[Brad93]

Wanted one of those forever but I do own it’s seven ton brotherView attachment 236879

Where is this one hiding?

Meanwhile in Spencer’s garden.

 

[Pete.]

Definitely. If I can climb to the top

If you climb to the top you should be able to see OVER the horizon

 

[Seadog]

I already have its brother...

 

[God mode restorations]

Where is this one hiding?

Meanwhile in Spencer’s garden.

Raiders of the lost arc ....

 

[Olderisbetter]

One aborted mixer to out for sale and finally found this
Perfect for my needs
View attachment 236574

And the missing link
A poly synth and very nice is is too.

Virtual analog but very capable
View attachment 236575 View attachment 236576

Just spotted this https://www.ebay.co.uk/itm/184333190062 it is a 40th gift from a few of us, he is broke at the moment and he needs a feel better present from a us, his old one was stolen from a studio night session a while back.

 

[eLuSiVeMiTe]

Just spotted this https://www.ebay.co.uk/itm/184333190062 it is a 40th gift from a few of us, he is broke at the moment and he needs a feel better present from a us, his old one was stolen from a studio night session a while back.

Nothing sounds like a tb303.
Nice gift for him

Have a Roland tb-3 on the shelf actually.
Software based emulation.

Found a clever open source app that lets me get into the synth engine and play with the patches

Just been trying to work out why I can't sequence the accents and slides externally.

 

[Richiew]

Raiders of the lost arc ....

I see what you did there.

 

[angellonewolf]

A push bike!

No real clue about them, alooominum frame so nice and light, suspension (comfort not speed) and a good price. Its had a few bits like new pedals and a few cables. I've got a seat on order too.

Only bike I've had with disc brakes, they seem poor compared to the V brakes on a bike I was given but they might adjust, not even looked really

View attachment 236855

setup right and assuming the pads are ok and not full of road carp and grease they should be noticable better especialy if the disks are stright


first cheak disks are streight before any ajustments (you can make them better if bent but not easy and you will not get them streight )

to make them better if dirt and grease in pads and disks

cheap option washing up liquid remove pads put in hot water add a bit of washing up liquid rince in clean water a few times and let dry to clean disks same washing up liquild hot water wash and rince a few times then let dry

better option brake cleaner same remove pads and disks lots of spray and wipe disks blow compressed air over the pads let dry install

set up

first look down the the pads and calipers pull the brake lever see if if it pulls or pushes the disk if it does its not centered big no no
there are 2 bolts holding the caliper loose them off pull the lever a few times this will center the caliper tighten the bolts a bit at a time not all at once untill tight or it will pull of center again once done cheak when you pull lever it just holds the disk not pulls or pushes

there is a hex or allen key on the inside of the caliper it just pushes the non movable pad in and out put it in so its very near touching loose off the ajustment screw(leave a little loose ajustment on there in case) on brake lever undo the cable holder on the caliper tighten it so the pad is very near the other side of disk

pull lever it should pull tight not pulling the disk off center and brake quite well lift up wheel spin there should be a very little resistance on either side resting but not slowing make ajustments so its as described take for a ride the breakes should be dead on and ony 1/3 of lever of a pull to stop near dead

lots of vids on line on how to but this will get most general riders a GOOD brake front and back

DONT PULL AND BRAKE LEVERS ONCE PADS ARE REMOVED A WORLD OF PAIN TRYING TO GET RIGHT AFTER THIS

AND IDEALY PUT PADS ON SAME SIDE AS THEY WHERE REMOVED FROM OR IT WILL HAVE TO BED IN AGAIN

if the disks have been bent use the same set up i find a ajustable wrench to pull them near streight and do as above but will need more pull to get to stop

all this asuming the cable not oil or way different

 

[stuvy]

Ordered this lovely rechargeable light as my snap on one was too big for under a dash and was killing my phone battery only £20 off eBay and soooo bright

 

[johnny7]

Today I acquired.
This monster asquith drill. A big lump to.View attachment 236800 View attachment 236802 View attachment 236803 View attachment 236804

We have a whopping gret Asquith radial at work, It was used up til about eight years ago!

John

 

[The_Yellow_Ardvark]

Very little today.
Must are empty, or the good stuff was to deep to get at.



A boot load of Oak floor cut outs.
They are dis-guarded due to knots, shanks and splits. The waste used to be used to heat their shop, but today I found a enough in their skip to make asking worth it.



Plus a box of M8, a few M10 nuts and bolts. Plus a few odd grub screws.



Finaly, pulled this lot from the skip at a hire place, again water damaged box's.
I got 3, I managed to save 2/3 off the discs.

 

[Olderisbetter]

New ear phones for £35 made by Anker very happy with the noise and an ERA fortess lock finally fitted to the shed it was sat in a mates van for a year so he donated it for free but i haggled and he threw in the brass handles.

 

[angellonewolf]

New ear phones for £35 made by Anker very happy with the noise and an ERA fortess lock finally fitted to the shed it was sat in a mates van for a year so he donated it for free but i haggled and he threw in the brass handles.View attachment 237032 View attachment 237033

hold on you had a lock for free and then said i want the handles as well want to boot sale buying with me id save a packet

 

[Olderisbetter]

hold on you had a lock for free and then said i want the handles as well want to boot sale buying with me id save a packet

My father was from the north what can i say.

 

[stuvy]

I forgot I posted the light but here’s my new flush cuts at £3 from evilbay

 

[vw-al]

Picked this up today,over 200 mile round trip but it was worth it as it was cheap, it has issues,I did know about them so no surprises, cobbled it together to test it when I got home and it chugged around the garden. I will start a separate thread on it.

 

[sardine]

View attachment 237095 Picked this up today,over 200 mile round trip but it was worth it as it was cheap, it has issues,I did know about them so no surprises, cobbled it together to test it when I got home and it chugged around the garden. I will start a separate thread on it.

I dare you to take it through the McDonald's drive thu.

 

[Wallace]

HP inkjet printer heading for the bin, not seeing the print head. I offered to take a look but they bought a new one. A bit of cleaning on the mechanical contacts within the print head block seems to have cured the fault code but they stuck some old cartridges in locked up by HP Instant Ink scheme so I cannot test it yet. Scans okay and double sided too, might take a punt on a cheap CISS for it rather than cartridges.

 

[anto44]

I dare you to take it through the McDonald's drive thu.

I once watched 2 drunk guys on a ride on mower getting arrested in a McDonald's drive through, there was a miscommunication when the cops called for a truck to collect the mower and an artic truck with a 40ft low loader turned up to collect it.

 

[slim_boy_fat]

HP printers won't do well with some 'compatible' cartridges as the originals are filled under pressure, also refilling originals is the same.

I managed to find some online at eBay for my Deskjet 1220C iirc which, so far, are doing the job....much cheaper #fingers crossed