Thoughts on damaged thread

[grim_d]

You really aren't having much luck with that machine.

The cynic In me thinks they've sent me the dodgy spindle they've had on the shelf for a while that they didn't know what to do with. 99% of people wouldn't check the runout.

 

[roofman]

The cynic In me thinks they've sent me the dodgy spindle they've had on the shelf for a while that they didn't know what to do with. 99% of people wouldn't check the runout.

could you not get your old one welded up and re-cut?

 

[Screwdriver]

Can you reject it?

 

[grim_d]

could you not get your old one welded up and re-cut?

Would almost certainly cost more than a replacement.

Can you reject it?

That's the plan. It's out of spec.

 

[grim_d]

Yep, someone else’s returned item, I expect. Request a replacement, that is in spec, would be my next move - but depends on how much ’six times’ is. 6 times virtually zero may still be pretty good, but six times the specified maximum run-out would likely trash cutters in short time and/or reduce bearing life.

Their next obstructive move would likely claim it is a hobby machine, not rated for commercial use.

Thankfully not, it's not a hobby machine nor is it sold as such.

 

[mike 109444]

Looking at the pics in the 1st post there does not seam to be any chamfer on the start of the thread !