Stuff you have made today

[RichardM]

@northwest - can't you just move the guard round 90 degrees?

There's one on Ebay with the whole head rotated 90 deg;

CORDED 230V/1800W BLACK & DECKER PROLINE PL85 ANGLE GRINDER DIY GRINDING 230MM | eBay

Find many great new & used options and get the best deals for CORDED 230V/1800W BLACK & DECKER PROLINE PL85 ANGLE GRINDER DIY GRINDING 230MM at the best online prices at eBay! Free delivery for many products.

www.ebay.co.uk

Would yours rotate 180 degrees?

 

[mtt.tr]

Made a few rests forthe benches today. Threatened to do it a while back but I needed something "suitable" which turned out to be the bottom leg for adustable scaffoldi ng. I know, but these guys could break a cannonball!View attachment 411102

Then, continuing my mission of trying to actually finish some jobs I determined to finish cutting the large bit of rail track into two smaller bits. This is where it went a bit south. My pal realised something was up when all the sparks were going skywards, he came over explaining the grinder should be going the other way, go on then, have a go:

View attachment 411103
View attachment 411104

As yiu can see, he had to press the trigger with his thumb, it really could do with being turned 180 degrees to have the trigger in the proper orientation. If anyone has any suggestions I would welcome them. Meanwhile, finished the job so result anyway.

Does the gearbox have 4 screws you can remove them rotate it

 

[Hood]

Does the gearbox have 4 screws you can remove them rotate it

Aye looks like that is what has happened, someone has had the gearbox off and put it back 90 degrees out .

 

[Hood]

A pic of the way it should be.

 

[jsf55]

Had some left over parts after i repaired the door on the teardrop. I have storage under the bed and find the rear compartment a pain to get too. So a hatch would be ideal and hopefully a slide out 'drawer' that can be used as a table can be added. Progress so far, basic hand tolls and bought nothing for it yet

 

[jsf55]

Didn't realise there was a post limit !

 

[Fraserb]

Do you live in Alaska.
That's alot of work to "make a start on this tonight"

The TV was boring so about 4.30 I decided I'd sort out the wood and Carey it round to rhe garden, had that done for 5 30 or so and decided I'd lay the bearers out, then thought may as well screw them down, then thought well I could lay the bottom layer of wood to see how well it slotted together and well things kind of escalated.

 

[Hood]

Did some messing about with different settings on the laser on a flagstone.

 

[Blobber]

Did some messing about with different settings on the laser on a flagstone.

View attachment 411200

Thats quite impressive

 

[redlig]

I'm not saying my Mrs isn't very observant, but I reckon I could drill enough holes to make this place look like a Swiss cheese and it would still be months before she noticed.

In fact I'm pretty sure it would take her a couple of weeks to notice if I didn't come back in from the shed. That's true love for you (or something).

Better that than one who is always pointing and picking.

 

[Hood]

Thats quite impressive

Yes, wasn't expecting it to come out so well and also wasn't expecting the possibility to have black lines or white infill depending on settings.

 

[Blobber]

Yes, wasn't expecting it to come out so well and also wasn't expecting the possibility to have black lines or white infill depending on settings.

Does it take much material off? would it be durable outside in the weather or would it fade quickly?

 

[Hood]

It is quite deep on the dark parts, not sure about the white, would have to check

 

[MattF]

Does it take much material off? would it be durable outside in the weather or would it fade quickly?

If I was he, I'd bury it & let someone head scratch regarding it in later years.

 

[dobbslc]

Better still, take a few down to Lyme Regis and leave them on the fore shore just under the cliffs

 

[Sergei Slovenija]

Parts #2

View attachment 411071 View attachment 411072 View attachment 411073

Taper turning.

 

[Blue Chips]

Did some messing about with different settings on the laser on a flagstone.

That has lots of possibilities. It would be interesting to try it on different types of stones and surfaces. Are those etchings all single-pass, or did you do multiple passes?

 

[Hood]

That has lots of possibilities. It would be interesting to try it on different types of stones and surfaces. Are those etchings all single-pass, or did you do multiple passes?

All single, just varied feed and power and fill or line.

 

[Sergei Slovenija]

Taper turning.

View attachment 411298

Tomorrow I will put everything together, butterfly valve, adapters, etc.

 

[God mode restorations]

Today. Made something completely boring...a set of light brackets for dads little trailer