RCD tripping with lathe

[brightspark]

I think I catch you drift can it be free flowing or does it need to be bolted to the cabinet?

its basicaly a piece of home made u shaped channel that is fastened to the casing with a bracket thats is slid over the belt to stop it spreading .cant take a piccy because ive lost my camera

 

[brightspark]

Y'know what I have loads of pics of the machine but none of them show the pulley.

I think it would be a step back for you anyway TBH I would certainly go the VFD and 3-phase motor route. I don't think I would ever want a lathe now without variable speed.

i wouldnt have one without a clutch

 

[Pete.]

I will do the vfd and phase motor when the current one dies a death, I cant bring myself to do it other wise! do you still have the machine in question?

Yeah but it's well buried. It's on a future project list.

 

[123hotchef]

its basicaly a piece of home made u shaped channel that is fastened to the casing with a bracket thats is slid over the belt to stop it spreading .cant take a piccy because ive lost my camera

its basicaly a piece of home made u shaped channel that is fastened to the casing with a bracket thats is slid over the belt to stop it spreading .cant take a piccy because ive lost my camera

does it need to have any rotating parts to stop belt wear?

 

[brightspark]

does it need to have any rotating parts to stop belt wear?

no once you slacken the motor of the pulley the belt is stationary here is the guide either side of the belt to give you the idea. no need for the jockey wheel to tighten the belt as you use the motor to tighten and slacken the belt http://merrytiller.co.uk/spares1.htm

 

[Pete.]

My lathe's system is called a fast & loose pulley set:

 

[123hotchef]

the 3511 part

 

[brightspark]

the 3511 part

View attachment 344737

yep the pulley just spins until the belt is tensioned.-quite simple

 

[123hotchef]

I am thining it could be spung loaded and just clamp around the belts and not fixed maybe

 

[brightspark]

I am thining it could be spung loaded and just clamp around the belts and not fixed maybe

no it must be fixed otherwise the belt would grip on the pulley

 

[123hotchef]

no it must be fixed otherwise the belt would grip on the pulley

I will get down there and see what I can coble together

 

[123hotchef]

Well it's done and working I may weld the angle in to give me more adjustment if I need it.

 

[123hotchef]

 

[brightspark]

Well it's done and working I may weld the angle in to give me more adjustment if I need it.

View attachment 344829 View attachment 344830

excellentl

 

[123hotchef]

Tha

excellentl

Thank you for planting the seed

 

[Agroshield]

That is fantastic. Well done.

That's the amuse bouche. For the chef's special, you now have to find a sympathetic/respectful/tidy way to bring the lever out so it can be operated with the door closed.

 

[123hotchef]

That is fantastic. Well done.

That's the amuse bouche. For the chef's special, you now have to find a sympathetic/respectful/tidy way to bring the lever out so it can be operated with the door closed.

Now that is another great idea.
I need to get my thinking hat on for that one.

 

[brightspark]

make a rod up and a lever further up saves you bending down

 

[123hotchef]

make a rod up and a lever further up saves you bending down

not sure how that would wouk this is on a cam

 

[brightspark]

not sure how that would wouk this is on a cam

use the existing lever . take the ball off the end and fasten a hinge of sorts conected to the rod up over conected to a lever sticking out to operate just up and down