New welder time!!!

[Melvyn Best]

I’ve used several different makes of Mig welders over the years, SIP, Murex ( which I found to be the worst I have ever owned, purchased new but never managed to produce a decent weld , the company I bought it from denied ever selling it despite me producing their invoice) Sealey, Clark and loads more. My Rtech worked and produced a good weld straight from the box . I know where my money would be going if I ever need to replace it

 

[Tommy_K]

GYS EasyMIG 140A - Multiprocess 3 In 1 MIG/MAG Inverter Welder - Brand New | eBay UK

Brand new GYS EasyMIG 140A multiprocess welder, with MIG/MAG, Gasless, and MMA function. includes manual, MIG torch with accessories, MMA rod torch, earth clamp, and gas tubing. This item is in completely brand new condition having only been removed from the box for inspection and photographing...

www.ebay.co.uk

GYS easy mig 140 on eBay. item number 406247928497. £350.

Roll of wire for £20, Gas Regof r £20 and a 10L SGS 5% argon bottle for £150 (£80 deposit you get back when bottle returned)

You get a decent non Chinese Mig welder so a bit of customer support along with everything you need along with a euro torch fitting on it.

Good shout, thanks for looking. So the GYS welder are decent. They are french aren't they?

 

[Shedendman]

It weld copper does it,how interesting

 

[dobbslc]

That's the same as mine. Here's my review.

Thread 'GYS Easymig 140 review.'

Mar 5, 2017

Well after umming and ahhring for ages about buying a mig welder I took the plunge. Thanks to everyone that has given me some good advice recently.
I've chosen a GYS Easymig 140 as it was available at a place called Barnet Welding Supplies that is near me that I've been getting my gas from. Hi Oliver
No links to this company but they've been really good to me so deserve a plug!
Oliver gave me a demo so I could have a quick blast on it and spent over an hour setting up the gas lines and talking me through the machine. It's an inverter machine so very light comes with a Euro torch...

• dobbslc
• Replies: 23
• forum: GYS, Parweld, Jasic

• 

 

[Tommy_K]

That's the same as mine. Here's my review.

Thread 'GYS Easymig 140 review.'

Mar 5, 2017

Well after umming and ahhring for ages about buying a mig welder I took the plunge. Thanks to everyone that has given me some good advice recently.
I've chosen a GYS Easymig 140 as it was available at a place called Barnet Welding Supplies that is near me that I've been getting my gas from. Hi Oliver
No links to this company but they've been really good to me so deserve a plug!
Oliver gave me a demo so I could have a quick blast on it and spent over an hour setting up the gas lines and talking me through the machine. It's an inverter machine so very light comes with a Euro torch...

• dobbslc
• Replies: 23
• forum: GYS, Parweld, Jasic

• 

Thanks for sending this over, definitely looks like a winner for the price. And I'm guessing it's still going well with the machine?

 

[dobbslc]

Yes I last used it a couple of months ago after I finally got a decent sized bottle of gas and set it up on a trolley ready for use.

.

 

[dobbslc]

Wow I just noticed I bought that welder in 2017!

 

[Tommy_K]

Yes I last used it a couple of months ago after I finally got a decent sized bottle of gas and set it up on a trolley ready for use.

.View attachment 514960

Looks like a good little setup you've got there

 

[arther dailey]

those trollies give me the shivvers, upside down weeble just waiting to topple when they hit a ant...or you tug the lead to get that last spot, although you know you should nt

 

[dobbslc]

There's no real danger of it falling, as I don't do any weldings...