Clarke IG1000 inverter generator servicing.

[ajlelectronics]

Clarke international don't have them, L&S can't help and searches for the Ruixing 124 have drawn a blank.

 

[ajlelectronics]

This is what I need. About to see if they still exist!

 

[ajlelectronics]

 

[ajlelectronics]

With the missing spring, it does fire and then dies which is no doubt to do with the mixture adjustment. However I have no idea of its intended position and can't tune it in situ because access is obstructed by the exhaust assembly.

 

[zzr1200]

I'd be pulling apart a cheap click type bio and finding the cartridge return spring for a bit of fettling....

 

[ajlelectronics]

I'd be pulling apart a cheap click type bio and finding the cartridge return spring for a bit of fettling....

I have the updated throttle link on order, so not so concerned about that. I am just baffled about how I adjust the fuel mixture when I can't access it.

 

[ajlelectronics]

 

[GRW]

I have the updated throttle link on order, so not so concerned about that. I am just baffled about how I adjust the fuel mixture when I can't access it.

Did you note how many turns out on the adjustment screw when you removed it?
If you did, preset it back to that before install.
(If you didn't note the settings try 1.5 turns out from fully seated - it's a pretty common setting - and a plug electrode check for colour after a period of running should let you know if it's ok)

 

[ajlelectronics]

Did you note how many turns out on the adjustment screw when you removed it?

I didn't as I thought it was a jet.

If you did, preset it back to that before install.
(If you didn't note the settings try 1.5 turns out from fully seated - it's a pretty common setting - and a plug electrode check for colour after a period of running should let you know if it's ok)

I will do that, thank you. I'm not going to mess with it now until the throttle link arrives.z

 

[zzr1200]

https://www.zoro.co.uk/shop/tools-and-machining/screwdriver-sets/offset-screwdriver-set-3-piece/p/ZT1012644X?utm_source=google&utm_campaign=pla%2B%7C%2BTools%20%26%20Machining&utm_term=ZT1012644X&utm_medium=pla_css_4&targetid=pla-293946777986&loc_physical_ms=9189407&dev=c&gad_source=1&gad_campaignid=16099542881&gbraid=0AAAAADgXECORrSB42KRwgE_b3vFynb_wK&gclid=Cj0KCQjw5onGBhDeARIsAFK6QJYtAw7yadjzWbIdWPTX9JcZL_WjqVKMTeyeTvRvRM1Evzz_8hTUneAaArecEALw_wcB

....