OJCar
Member
- Messages
- 2,520
- Location
- Lothian & Westmorland
- Thread starter monkeymark
- Start date
That will keep you busy. There is a knack of fitting the springs, to get the pin in far enough to pick up the end of the spring then knock it in. Here is mine. https://www.mig-welding.co.uk/forum/threads/stuff-you-have-made-today.67127/post-2141428
Blobber
Forum Supporter
- Messages
- 3,389
- Location
- lincolnshire
A lot of the tine holders are pretty worn on mine but like you im not paying £12 a pop for 20!! plan is to hopefully build up with weld the worst of them and knock it back to near round with the angry grinder, its not precision after all
I nearly bought some of the seals, bought 3 bottles of Banks Amber and a can of the bronze spray which I am pleasantly surprised with.I blame that Bob bloke, he's got a lot to answer for!
View attachment 452387
and a 383 piece get you out of trouble seal kit for £4 from the same well known supermarket
View attachment 452389
roofman
Purveyor of fine English buckets and mops
- Messages
- 12,527
- Location
- North West with water on 3 sides
poor guy, i was upset when we lost him
I hope the gas torch is not for your work in HR !
very good bike rider too.
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
I got lucky as our local Aldi finally got some batteries in, but the tools no longer seem to be available ?I blame that Bob bloke, he's got a lot to answer for!
View attachment 452387
and a 383 piece get you out of trouble seal kit for £4 from the same well known supermarket
View attachment 452389
Blobber
Forum Supporter
- Messages
- 3,389
- Location
- lincolnshire
Ours is hit and miss, looks like a jumble sale most of the time, they very rarely have tools, batteries and chargers at the same time, to be honest the grubb is going down hill as well
Red'n'Black
Forum Supporter
- Messages
- 738
- Location
- Malvern, Worcs
Forget where I read this but after he retired from the music biz he ran a country pub in Essex for a while.poor guy, i was upset when we lost him
Some customer would wander in when he was putting logs in the woodburner and make the inevitable joke. And then have to put a quid in the swear jar.
DAPPH
as dyslexik as I'm daft
- Messages
- 7,489
- Location
- Near to Cross Hands Llanelli SouthWales GB
There aren't any suitable " O " rings for Hozelock spigot nozzles in them . I had to buy a pack of 20 off 11.3 ID x 2.3mm from Amazon for something like £2.43 inc P&PI blame that Bob bloke, he's got a lot to answer for!
View attachment 452387
and a 383 piece get you out of trouble seal kit for £4 from the same well known supermarket
View attachment 452389
Rannsachair
Forum Supporter
- Messages
- 4,388
- Location
- Lochgilphead, Argyll, Republic of Scotland
One for my file drawer:
or the cat!
or the cat!
dan.taylor.1
General Tinkererer
- Messages
- 2,786
- Location
- Kendal, Cumbria
Where's that from?
Rannsachair
Forum Supporter
- Messages
- 4,388
- Location
- Lochgilphead, Argyll, Republic of Scotland
https://www.amazon.co.uk/dp/B002RA7ACM?psc=1&ref=ppx_yo2ov_dt_b_product_details
Though was £7.68 delivered a few days ago when I ordered.
Gragson
Member
- Messages
- 2,644
- Location
- Bucks
The display on your model is a lot bigger!
I know it's a different model but might need that one unless I can grow those eyeballs
See you have the JCB coloured version of the chair - you should be good, I've really put a lot of weight on and launching off at angles probably stresses although childishly good fun..
MattF
Forum Supporter
- Messages
- 17,896
- Location
- South Yorkshire
Aye. Just took my fancy, that colour. When I was taking the photo, I was thinking: "I'm not usually a fan of yellow", then noticed both the plane & Eric nearby, & thought: "I take that back".
