Today I acquired...........

[James1979]

Feet ! that's wide open to interpretation I had a lovely three section wind up jack nicked out me garden by the thieving scrappers it was massive at least a 10 tonner I would think . Do you collect them ? jacks that is not feet .

Neither.

I was joking but all the Jack lovers have come out the woodwork now

Those are good ones though. My mate got one in his horse box. It’s a powerful thing.

 

[roblane65]

Neither.

I was joking but all the Jack lovers have come out the woodwork now

Those are good ones though. My mate got one in his horse box. It’s a powerful thing.

" jack lovers " .............

 

[Rannsachair]

A packet of oil nipples for my lathe:

and 2 painted galvanised doors for my Defender:

 

[Danez]

got myself a free genny from me dad who needed the space

while moving it this fell out of it…can’t find where it goes lol looks like an adjusting or bleed screw or something?

 

[Cobbler]

I reckon that was just lodged in there, nothing to do with the generator at all.

 

[The_Yellow_Ardvark]

here it goes lol looks like an adjusting or bleed screw or something?

Grease Nipple.

 

[Danez]

ah nice one cheers, makes sense

Grease Nipple.

 

[Danez]

I reckon that was just lodged in there, nothing to do with the generator at all.

i thought that but the red on there is the same colour as the genny case but could just be a coincidence!

 

[25.4_mechanic]

A packet of oil nipples for my lathe:

Congrats for that green! Nice!!

Question:

Could you please show the mouthpiece that feeds these oil nipples? Thank you very much!


Carsten

--

 

[The_Yellow_Ardvark]

I was having a laugh today, one "Trendy" antiwue and modern art shop.

Read into that what you wish.

I brought 4 "Steam Punk Cookie dough cutter.

They ley me have them cheep as they could not clean them very well. Display only Sir.

They also let me have this "Forign Tool cheep as well.

But That was just one unit on the site.

I was into the cafe next, coffee and doughnuts. They yet to have to pay for a new extinguisher. I always sort them out. They let me have a rumage in the rubish shed as well.

The pottery place was very nice, no stuff was liberated.

 

[The_Yellow_Ardvark]

This is the results of a rumage in the rubbish pile/shed.

I told them that the 4 square bits of metal were not cookie dough cutters.

But for making twisted pasta.


This was in the fire wood pile!!!!!!!!!!!!!!!!!!!!!!!!!!

A decent size wooden clamp.


Scrap pile, again.
The nive person i asked tp make a part for the other one. I will still be askng.

This was again to be scraped, as they didn't know what it was.

To be honest, it was flapping around like a sail in a gale.

This was scrap, only one weight is any good to me. Gor now. That is the 1G weight.

I may have part sets theses mat fill up to full sets.

There was about 8 of these kits, I got two what I will find usefull.



This was saved, for parts.

I will not, honest. look for parts in my scrap bin to fix this.
Honest.




I stoped via Norberts, for a coffee. I will say he does have good taste in coffee.
He ordered this box of pegs on line.
Yes, he did not check the size.

 

[Matchless]

Bought this (probably broken) metal melter from the Stondon auction, mains cable cut so probably trips out, damp as they had it outside so a strip down will be the first job,

 

[slim_boy_fat]

Could you please show the mouthpiece that feeds these grease oil nipples?

Fixed that for you.....

 

[25.4_mechanic]

Fixed that for you.....

fixed it myself

 

[MattF]

Congrats for that green! Nice!!

Question:

View attachment 370032

Could you please show the mouthpiece that feeds these oil nipples? Thank you very much!


Carsten

--

Oil can spout. It's a sprung ball bearing in the top. Depress it with the spout tip & squirt oil in.

 

[25.4_mechanic]

Oil can spout. It's a sprung ball bearing in the top. Depress it with the spout tip & squirt oil in.

Thanks Matt.

That's the reason I'm asking: How does that specific tip looks like?

I have three oil-nipple-filler-pump-thingies with different tips.

Only the one with the pointy tip opens the ball, but the ball in return closes this tip of the pump - if oil comes it squirts evreywhere but in the opening.

My conclusion: there must still be oiler tips out there that I don't know about .... or did I just not understand you?!?
Or do you talk of a two-hander, one pointy thing in one hand and an oil-can in the other and just drip it in there???


Carsten

--

 

[MattF]

Use the side edge of the tip to depress the ball. You angle it.

 

[The_Yellow_Ardvark]

Bought this (probably broken) metal melter from the Stondon auction, mains cable cut so probably trips out, damp as they had it outside so a strip down will be the first job, View attachment 370043View attachment 370044View attachment 370045View attachment 370046

Nice bit of kit,
One or more element may of burnt out.
Simple to check with a multi meter.

 

[Sergei Slovenija]

Industrial vacuum cleaner 4 kW. With trolley and hose, 25 meters long and accessories. For all 1.000 euros. The vacuum cleaner has already been disassembled and primed. Slight corrosion on the corners.

 

[25.4_mechanic]

Use the side edge of the tip to depress the ball. You angle it.

Ok, once again I was thinking too complicated - this was the way to do it.

No pressure, no pump, nothing special, just drip by drip - thanks again @MattF and sorry for the bandwidth.



Carsten

--