Dcal
Member
- Messages
- 3,861
- Location
- Antrim Northern Ireland
If it's fully cured it should be OK to sand.
Are you using very fine sandpaper?
Try 320 (or 240 then 320) Mirka abranet and see how you get on but any production paper should cut it easily.
I do most of my epoxy sanding with a block to keep (or form) the shape.
Are you using very fine sandpaper?
Try 320 (or 240 then 320) Mirka abranet and see how you get on but any production paper should cut it easily.
I do most of my epoxy sanding with a block to keep (or form) the shape.