Stuff you have made today

[slim_boy_fat]

You could have ordered them from 'Trebuchets R Us' , but where would be the fun & satisfaction in that.....

https://www.google.com/search?q=tre...WNiVwKHdJiB1wQ_AUoA3oECA8QBQ&biw=1010&bih=504

Looking goo so far

 

[Maker]

You could have ordered them from 'Trebuchets R Us' , but where would be the fun & satisfaction in that.....

https://www.google.com/search?q=tre...WNiVwKHdJiB1wQ_AUoA3oECA8QBQ&biw=1010&bih=504

Looking goo so far

It's a catapult not a Trebuchet.

 

[slim_boy_fat]

It's a catapult not a Trebuchet.

Mhhh, in my book this is a catapult

But the OP can refer to it however he wants, it's his project.

 

[Menno Bruinen]

Welded (mig) together a trial aircraft tyre stand.
If there's green light to continue, then it will be cutting metal tommorow...
Aircraft tyres are required to be turned on a schedule, that's why it's on rollers.

 

[m_c]

This was last nights achievement. An offset hole.


All done automagically, after I finally read the manual and figured out how to activate C-axis mode, lock the spindle, and run the live tooling independently via G/M-codes.

Now that I'm gradually making more things with this lathe, I'm really appreciating the sales rep advising me to get the bigger model with 700mm of X travel, as 500mm travel would have really limited what I'm now doing.

 

[gaz1]

this is what i have been doing

3 on first day and 6 on second day



cladding and insulating it between the 2 of us at moment

 

[Burdekin]

Mhhh, in my book this is a catapult

But the OP can refer to it however he wants, it's his project.

A Shanghai or ging where I come from. Always had them as a kid.

 

[Olderisbetter]

Made a few more shelves and fitted them in the shop, now back home to be painted.

 

[Memmeddu]

Cut wood using my hachet just after have razor sharpened its edge
First piece of wood chipped the edge .
Apparently the tree growth up around a piece of steel wire
Anyway it sliced through the steel like nothing but felt its density .
Raw linseed oil is dry ,on next Monday I'll apply little bit more
I've refresh the edge once finished but it's not razor sharp .
Tomorrow I'll try to sharpen it better

 

[Kram]

Repurposed a pallet, little bridge for when we do the floor leveling later. Couple of long screws supporting it off the floor.

 

[mtt.tr]

Made a flat pack willow, all you need is to add carbon

 

[Kram]

Leveled. I hope! This stuff flowed better, but not as much as Id like. If theres a next time, need a wide spreader/trowel on a broom handle, a tiling trowel is too small.

 

[slim_boy_fat]

Repurposed a pallet, little bridge for when we do the floor leveling later. Couple of long screws supporting it off the floor....

So, the saw lived up to expectations then?

 

[mtt.tr]

Leveled. I hope! This stuff flowed better, but not as much as Id like. If theres a next time, need a wide spreader/trowel on a broom handle, a tiling trowel is too small.

And the shoes with spikes

 

[Jlg]

Been 6 months since I had time to fire the lathe up so jumped straight in cutting a 1/2” unf thread guess what it’s off

 

[Kram]

The saw was perfect, even with the small battery it cut 18mm thick pallet, 20 cuts or more no problem.

Used my old addidas XCS running spikes, 12mm

 

[Maker]

Another day in the kitchen.

2.5kg of dough...



Cut into ten, flattened, topped and baked;


Thought I'd try a bit of chilli jam dotted around under the cheese, it's absolutely amazing! I'm wondering about "basil jam" now (or some kind of pretentious reduction)

Also converted a chicken and some kelp into a pot of flavourless mush and four litres of fatty wee.

 

[selectedgrub]

^^Well I'm hungry now

I might just get to finish Trucker girls card, a little pallet of course.
Still got a week or so.

 

[henry Kadzielski]

Yesterday it was launched and handed over, much to my relief. All went as good as could be expected, but no Tv coverage . Was promised but didn't show, they claim they will do it later

Anyway it was blowing about 30ktn, but all still worked. Now lets see what's next, another one maybe

 

[Hood]

Looking good @henry Kadzielski , was the design supplied or was it your own?