dobbslc
Forum Supporter
- Messages
- 13,284
- Location
- Hertfordshire UK
- Thread starter monkeymark
- Start date
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,332
- Location
- Going Away.
brightspark
Member
- Messages
- 41,357
- Location
- yarm stockton on tees
it goes over a few fields nowadays but I think I know my way down the m1Has it got the M1 on it?
Tangledfeet
Think outside, no box required.
- Messages
- 3,198
- Location
- Top of a hill above St Andrews, Fife
But the bullet last week and upped my anvil game.
I'd been on the lookout for a rail track one for a while and the horse's head I'm making for Project Management's Christmas present warranted the expenditure. Well... it does in my mind anyway!
Do have an ancient old anvil given to me by an old neighbour when he moved; it had been outside for years and very rusted and pitted; a weeks soak in citric acid revealed the cracks too - has been useful as something to chain things to in the workshop when we go on holiday. Didn't have a flat surface on it anyway.
I'd been on the lookout for a rail track one for a while and the horse's head I'm making for Project Management's Christmas present warranted the expenditure. Well... it does in my mind anyway!
Do have an ancient old anvil given to me by an old neighbour when he moved; it had been outside for years and very rusted and pitted; a weeks soak in citric acid revealed the cracks too - has been useful as something to chain things to in the workshop when we go on holiday. Didn't have a flat surface on it anyway.
@Tangledfeet you may have just provided inspiration for what to do with the length of rail sat behind the shed 
Tangledfeet
Think outside, no box required.
- Messages
- 3,198
- Location
- Top of a hill above St Andrews, Fife
@Tangledfeet you may have just provided inspiration for what to do with the length of rail sat behind the shed
This one is 20" long and was £140 delivered so you could make some money...
How much?
I'll have to have a word with my brother to see how much more he's got hidden, as I think it's only a 3 or 4ft length
Tangledfeet
Think outside, no box required.
- Messages
- 3,198
- Location
- Top of a hill above St Andrews, Fife
How much?
I'll have to have a word with my brother to see how much more he's got hidden, as I think it's only a 3 or 4ft length
Yup... seems that finding railway line in manageable lengths in convenient places is rare as hen's teeth.
I could always sell the old anvil on eBay or Gumtree by including the terms 'artisan', 'shabby chic', 'preloved' and 'upcycled' and I'd probably get my money back...
Hood
I am obsessed.
- Messages
- 17,778
- Location
- Carnoustie, Scotland
Today I acquired some extra batteries for the vape 
They are out of the dud battery for the vans laptop but seems they are actually fine, probably the bleeding pcb in the battery programmed to say it is knackered and to replace
Anyway all charged up fine and one has lasted all day and is still going strong so I reckon the rest will be fine
They are out of the dud battery for the vans laptop but seems they are actually fine, probably the bleeding pcb in the battery programmed to say it is knackered and to replace
Anyway all charged up fine and one has lasted all day and is still going strong so I reckon the rest will be fine
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 18,005
- Location
- East Yorkshire
HOW much. A bit found it way into my car boot a while back, must be 30". Its not light
I cant believe the prices Anvils are fetching...its ridiculous, theyre only a lump of steel........a drill or a saw etc does something
Its like Sinks, they are more expensive than a Fridge, and when all is said and done, a sink is just a hole
Its like Sinks, they are more expensive than a Fridge, and when all is said and done, a sink is just a hole
Pete.
Member
- Messages
- 14,898
- Location
- Kent, UK
There's a few for sale this weekend. Going by the pics they look like they are in good condition:
https://www.gumtree.com/p/lathes/bl...ls-from-£200-each-swage-blocks-etc/1391692673
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
Today I acquired a Wanner brand grease gun and a small keyring light, then a welder friend stopped by and gave me a pair of leather gloves.
northwest
Searching for the Holy Grail.........
- Messages
- 6,496
- Location
- Manchester UK
Well my new fine pole magnetic vice has arrived from Poland:
4" x 7" and seems to be exactly what is needed. I have given up on the Eclipse one I have as it needs too much force to move the handle from OFF to On. There is definitely something wrong with it and all of the manuals I have read strongly advise not taking it apart. This is just the ticket though, nice fine poles so will hold the small stuff I tend to do. Couple of sacrificial plates and I will be all set.
4" x 7" and seems to be exactly what is needed. I have given up on the Eclipse one I have as it needs too much force to move the handle from OFF to On. There is definitely something wrong with it and all of the manuals I have read strongly advise not taking it apart. This is just the ticket though, nice fine poles so will hold the small stuff I tend to do. Couple of sacrificial plates and I will be all set.
Brad93
Member
- Messages
- 19,102
- Location
- Essex, United Kingdom
Yeah don’t take it apart it demagnetises the cores. Only eclipse can do repairs if I remember correctly
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 18,005
- Location
- East Yorkshire
Worth remembering
Pete.
Member
- Messages
- 14,898
- Location
- Kent, UK
It doesn't de-magnetise them completely but it does reduce the effort. Always a debate going on because of stupid youtubers doing how-to's in stripping them down and then claiming they could 'detect no difference' - of course they couldn't without the test equipment required, but the Eclipse manual is quite clear - dismantling them even momentarily will reduce the magnetic effort.
