Stuff you have made today

[Fraserb]

I'm still thankful my old man taught me to drive

7yo ride on lawnmower with a 4 speed and r box and clutch

He got me doing obstacle courses with and without a trailer. Then got me doing them backwards

Had to grow a bit taller before I got to play with the mini in the field

Wish I had the room to do the same for mine

He's fine in reverse with just the tractor it's just the first time he's had a trailer on, knowi g him he'll have it mastered by Saturday.

 

[steviec_lj]

Today, I have made a bodge.

Renault can’t be arsed to put a decent 24v 400w socket it, so this will do for now.

Hasn’t set on fire yet, but it could do with an inline switch..

 

[Dev]

I’ve been making chips!
Sadly my machine skills are about as good as my casting






Also did a quick upgrade using some battery LED lights with a remote;

 

[bricol]

Give me a child until he is seven and I will show you the man...........


Bob

Mates missus is a head mistress . . . "give me a child until they are five, and I can tell you which ones to shoot now . . . save a lot of trouble later . . ."

 

[Guzrik]

I’ve been making chips!
Sadly my machine skills are about as good as my casting
View attachment 243072
View attachment 243071
View attachment 243070



Also did a quick upgrade using some battery LED lights with a remote;

View attachment 243073

Did you make ligths inside the oven and microwave? They don't burn?

 

[Steveblade]

Today I made this

to go under this

 

[Steveblade]

11 done 37 to go.
Then crimp bullet connectors on then cut all my trs leads in half and crimp more bullet connectors on.

I predict some boring evenings ahead

Thats some serious wiring, are they 3 pin phono sockets ? Defo not the cheap crappy molded type!

 

[eLuSiVeMiTe]

Thats some serious wiring, are they 3 pin phono sockets ? Defo not the cheap crappy molded type!

Aye 1/4" trs

Will be wired to pass signal from the top output to the bottom input with no plugs inserted.
Plug a jack into the output will split the signal to the jack and lower output.
Pluging a jack into the lower will break the hardwiring and only send signal recieved from the jack.

Should save me unplugging leafs from the mixer and make routing easier.

 

[Munkul]

No load to big, watch out @KimB you'll have competition soon.

View attachment 243030 View attachment 243032 View attachment 243033 View attachment 243034 View attachment 243035

Awesome work there! If I'd have had toys like that at his age...

 

[slim_boy_fat]

Did you make ligths inside the oven and microwave? They don't burn?

Compare the size with the radiator, it's a child's play kitchen.

 

[Fraserb]

A bit smaller than my last job

 

[Munkul]

@Fraserb do you not have a load of harvesting to be busy with right about now?

 

[The_Yellow_Ardvark]

No load to big, watch out @KimB you'll have competition soon.

View attachment 243030 View attachment 243032 View attachment 243033 View attachment 243034 View attachment 243035

This may be of interest.



https://www.independent.co.uk/news/...-police-ride-petrol-station-gas-a7673576.html

 

[Hudmut]

I did this a few weeks ago but still thought id add a little somthing.

 

[Fraserb]

@Fraserb do you not have a load of harvesting to be busy with right about now?

Just a bit

 

[Fraserb]

This may be of interest.



https://www.independent.co.uk/news/...-police-ride-petrol-station-gas-a7673576.html

I can actually see Ben doing this

 

[paulmitchell1984]

Strictly not today, more last night..
Have a hand tail to make so borrowed a bender to have a play with,
1st play was with 1m of tubing and it didnt turn out too well as I dont have the correct die,

2and pic is of what I managed to get which isnt too bad,

And 3rd is me trying to bend tube then cut it so I can bend it all further, ain't pretty and need to rethink it but il get there

 

[Hitch]

Finished this off this morning, to a stage where its ready to be insulated and cladded. Back to me Monday to install the safety interlocks, instrument alcoves etc.

 

[nickk]

Just collected some of last weeks work from galvanising,this is a large ring for an event tent,the holes are for tension eyes,that’s as much as I know.id like a photo of it once erected,travels countrywide in normal times.

 

[eLuSiVeMiTe]

And done.
Looking forward to a window restoration next week.

Saws were my tip.