brightspark
Member
- Messages
- 41,614
- Location
- yarm stockton on tees
that would only show up if they were plugged in to rcd protected circuits and trip on plugging in
- Thread starter monkeymark
- Start date
British standard were and still are a whole library of technical requirements to be met to get the Kite mark of approved standard .
When we were in the EU we had to forego a lot of higher specifications and take in inferior EU made rubbish carrying the CE mark of compliance that usually originated as the German TUV mark .
We were due to kick the CE into the long grass but our beloved government have cried it off as the EU has said we are not doing the same number of testing's as the EU ( jobs for jobsworths ???? adding £ zillions to the cost of everything produced in the EU and now Great Britain ) .
Had our politicians of all persuasions been on the ball we would have had our testing regime in place the day we called Brexit , but the political infighting & back stabbing / vested interests has screwed us well and truly .
When we were in the EU we had to forego a lot of higher specifications and take in inferior EU made rubbish carrying the CE mark of compliance that usually originated as the German TUV mark .
We were due to kick the CE into the long grass but our beloved government have cried it off as the EU has said we are not doing the same number of testing's as the EU ( jobs for jobsworths ???? adding £ zillions to the cost of everything produced in the EU and now Great Britain ) .
Had our politicians of all persuasions been on the ball we would have had our testing regime in place the day we called Brexit , but the political infighting & back stabbing / vested interests has screwed us well and truly .
Memmeddu
Member
- Messages
- 5,915
- Location
- Italia Sardegna
Everything arrived today
Let's start with reamers smaller it's 8mm bigger 16
Collet chuck and collets for my Gianni Bonza SuperCondor 40 TC P Automatic mill drill.
Morse taper is threaded on the main body
I have to find out how to remove it to make a seat to be fitted in between to be able to retain it on the threaded quill on my mill
I have to find a way most likely I have to get a big Jacob cone on Morse taper 4 shank fit on the chuck, keep it in position using the tail stock, make the Jacob end cylindrical, thread it and then make a male/female threaded barrel to fit on the The collet holder and the shank with the retaining nut in between.
The little sensitive drill
It has a 6mm I think chuck
It's very heavy for its sizes.
But I think to love it already.
It will be the first machinery piece I'll be restoring on the channel
Being this small it wouldn't be a problem
Let's start with reamers smaller it's 8mm bigger 16
Collet chuck and collets for my Gianni Bonza SuperCondor 40 TC P Automatic mill drill.
Morse taper is threaded on the main body
I have to find out how to remove it to make a seat to be fitted in between to be able to retain it on the threaded quill on my mill
I have to find a way most likely I have to get a big Jacob cone on Morse taper 4 shank fit on the chuck, keep it in position using the tail stock, make the Jacob end cylindrical, thread it and then make a male/female threaded barrel to fit on the The collet holder and the shank with the retaining nut in between.
The little sensitive drill
It has a 6mm I think chuck
It's very heavy for its sizes.
But I think to love it already.
It will be the first machinery piece I'll be restoring on the channel
Being this small it wouldn't be a problem
Jelly_Sheffield
Time is an illusion. Lunchtime doubly so.
- Messages
- 1,461
- Location
- Sheffield, UK
Yeah, it needs a wipe, I got a bit carried away stir frying noodles for breakfast this morning.
