Today I acquired...........

[bigegg]

Haha i presumed you where far away anyway.

Just thought i would say anyway

I do try to get up to Scotland at least once a year, but mum is "shielding", so I'm stuck at home.

 

[Am333rcr]

Your welcome to swing by anytime.
i am at lanark

 

[bigegg]

Your welcome to swing by anytime.
i am at lanark

 

[angellonewolf]

a free new work top would not have bothered but a mate asked did I want it mine was burnt from welding but not bad but free and an hour fitting most of that was cleaning up

 

[slim_boy_fat]

^^ Oooohh, much tidiness!

 

[angellonewolf]

^^^^your having a graffe arnt you the work surface is 2 tone there is lots of shoes that are never used the slabs look like they seen wayyyyyyyyyy better days and my vice is getting wet

got to get some things done

 

[MattF]

^^ Oooohh, much tidiness!

I can't believe you made that sound complimentary.

 

[DennisCA]

Pair of 55 gallon drums, I will turn at least one into a forge.

Also got an axe head, here in the electrolysis bath

And after removing the black gunk electrolysis tends to create:

 

[Dr.Al]

Popped down to Lidl late last night and a kind man gave me early access to the Thursday sale items:

Also got the pen in the top-right hand corner thrown in with a less interesting acquisition. I probably should have looked at it more closely before handing it to my other half...

 

[Nick DV]

Just got this little air tool as a bargain, which was great until SWMBO decided it would be great for me to start a speedy replacement of our fencing

 

[johnny7]

Got another watch today, It was cheap but like new!!

I love how the lugs are ground flat and angled down!!

John

 

[8ob]

I was lured towards this cheap sticker in lidl`s, got this dinky little grinder, looks like a hany bit of kit. Also picked up a tray of hubert lee clips

 

[anto44]

I was lured towards this cheap sticker in lidl`s, got this dinky little grinder, looks like a hany bit of kit. Also picked up a tray of hubert lee clips

View attachment 247248 View attachment 247249 View attachment 247250

That looks identical to my snap on grinder.

Be very careful if you're using dremel type grinding stones in it, they'll explode if run at that grinders full speed, I learned that the fun way, even tried a few different ones just to check.
I have this snap on carbide set, these things can take serious punishment.

 

[Arc Tourist]

I was lured towards this cheap sticker in lidl`s, got this dinky little grinder, looks like a hany bit of kit. Also picked up a tray of hubert lee clips

View attachment 247248 View attachment 247249 View attachment 247250

Good deal there. Awhile back my Wife picked me up some steel toed boots which were reduced at our local. I grumbled at first, but they turned out to be one of the most comfortable pair of boots I've ever had. Can't fault Lidl, for the price they sell a fair product. Saw a lot of new tools at our local today, but didn't see the hose clamps; will have to go back for a second look.

 

[Turbo]

Popped down to Lidl late last night and a kind man gave me early access to the Thursday sale items:

View attachment 247098

Also got the pen in the top-right hand corner thrown in with a less interesting acquisition. I probably should have looked at it more closely before handing it to my other half...

They are quite decent clamps, not Bessey quality but I've not managed to bend or break one yet.

I've melted the plastic pads on a few so remove them before welding!

 

[Turbo]

I was lured towards this cheap sticker in lidl`s, got this dinky little grinder, looks like a hany bit of kit. Also picked up a tray of hubert lee clips

View attachment 247248 View attachment 247249 View attachment 247250

Do yourself a favour & chuck the hose clips in the bin now. That's where they will end up the first time you try to use one! They are the worst ones I've ever tried, they wring before they get slightly tight!

 

[Chillitt]

Do yourself a favour & chuck the hose clips in the bin now. That's where they will end up the first time you try to use one! They are the worst ones I've ever tried, they wring before they get slightly tight!

Same, but it was years ago

 

[Nick DV]

They are quite decent clamps, not Bessey quality but I've not managed to bend or break one yet.

I've melted the plastic pads on a few so remove them before welding!

I've had a few of these from eBay, and agree that for the money they are pretty tough clamps

 

[minimutly]

Yesterday I bought this - a friend picked it up, with instructions to see how it turned. One thing it didn't specify in the add was the size. Well it's big apparently, might need to make a davit to get it on my Fritz, maybe add the 13 inch rotating table to the shelf.
Anyone now of a suitably large tailstock (won't know what size till it arrives home).

 

[Dcal]

Very nice.
Looks like a @selectedgrub creation.