Today I acquired...........

[slim_boy_fat]

No because there is a 20mm bearing in both ends

Piece of round bar, with a 'notch/hook' machined/ground near one end, and a piece of flat stock welded to the other. Hook it inside the bearing at an angle and beat hell out of the flat stock end, rotating as necessary. It might take a while, but it will work. I can say that with confidence as I've done it in the past.

Once you have the first one out, of course......

 

[mtt.tr]

No because there is a 20mm bearing in both ends

These are what i make up and use, ive got 4 or 5 only mild steel they work well get slide hammer under the m8

Piece of round bar, with a 'notch/hook' machined/ground near one end, and a piece of flat stock welded to the other. Hook it inside the bearing at an angle and beat hell out of the flat stock end, rotating as necessary. It might take a while, but it will work. I can say that with confidence as I've done it in the past.

Once you have the first one out, of course......

Small bike head stock bearings

 

[mtt.tr]

Lawnmower deck pulley assembly

Added pics of the pullers i i make

 

[The_Yellow_Ardvark]

After the lazy post person, failed to correctly deliver the parcel yesterday, failure of the PO to be able to arrange a new date. I had to collect the parcel.

Turns out, there was 3. Not the 1 indicated on the card.

First 1 was work related items. Oh joy.
1 box of 20mm Hex head self drilling screws.
No. I don't know why either.

2nd was from a friend.



A blue box and a "thing."

Blue box was a set of Extractors. Brand new and sharp.



The thing.


The Short extension for this style Socket set.
I had lost the original one, a friend had a spare. This morning I found the lost one.
So I have a spare.

The final box.
Was some Tilley lamp spares.



Old But good Cap.
Washer kit.
Vaporizer.
Lets see if I can get the dead one working.

 

[Seadog]

2nd was from a friend.



A blue box and a "thing."

Blue box was a set of Extractors. Brand new and sharp.

Extractors, and you call him a friend?

 

[The_Yellow_Ardvark]

Extractors, and you call him a friend?

I have been successful in the past using them. So

I didn't say what kind of friend she is.

 

[Seadog]

Now I understand

 

[The_Yellow_Ardvark]

Now I understand

If you screw, you need to extract.

 

[Kram]

A decent m6 tap.

And modified.. to aquire.. chopped a cell out of one of my 6S lipo packs, so that it can be used on my parkside tools. Not quite finished need to solder new connections.
If this works I may split another and add the spare cell to get 3S and 4S for other things.

 

[slim_boy_fat]

Extractors, and you call him a friend?

It's called "pass the parcel problem".

 

[God mode restorations]

Haven't acquired a great deal lately. But did acquire this 60x1000 lump of what looks to be chromoly or stainless

 

[dobbslc]

Nuts!

2 of them.

And some BFO washers.

M38 by the looks of it
They were holding down a tower crane.

 

[The_Yellow_Ardvark]

They were holding down

What's holding it down now?

 

[dobbslc]

Well you saw that post with the massive crane doing a back flip.....

 

[The_Yellow_Ardvark]

Well you saw that post with the massive crane doing a back flip.....

So it was you then...................

 

[Matchless]

inherited these but just found them again, after watching the repair workshop program last night, probably a repeat, don't know if they are the same but has "for hard wire" stamped in German, if anyone watches it on catch up let me know if they are the same,

 

[jimbo84]

inherited these but just found them again, after watching the repair workshop program last night, probably a repeat, don't know if they are the same but has "for hard wire" stamped in German, if anyone watches it on catch up let me know if they are the same,

View attachment 228718 View attachment 228719 View attachment 228720

Saw it last night, they look the same to me.

 

[Matchless]

logo has C B with a tower or something in the middle?