Memmeddu
Member
- Messages
- 5,664
- Location
- Italia Sardegna
How does dro work?
I'm watching this old Tony since the last week and I know what it is but can't understand how it works because it can be added also to old machines
- Thread starter monkeymark
- Start date
I'm watching this old Tony since the last week and I know what it is but can't understand how it works because it can be added also to old machines
8ob
Member
- Messages
- 14,208
- Location
- Nescient in the vale
A fraction of the cost and probably a bit lighter. From rally design https://www.rallydesign.co.uk/advan...h_in_description=1&keywords=pedal box&&page=2
eLuSiVeMiTe
Member
- Messages
- 16,438
- Location
- ......
Cheers Bob. Might be a good starting point if I can fit the pots and load cells inA fraction of the cost and probably a bit lighter. From rally design https://www.rallydesign.co.uk/advanced_search_result.php?search_in_description=1&keywords=pedal box&&page=2
If not have a look at the tilton floor mounted also,
eLuSiVeMiTe
Member
- Messages
- 16,438
- Location
- ......
Never occurred to me to look at car parts. Reduced what I need to make drastically.
Will look at those.
zx9
Forum Supporter
- Messages
- 5,204
- Location
- South East London
Car racing game I suspect.
seriesonewelder
Member
- Messages
- 678
- Location
- West Midlands
Yes excellent, uses the Q8 battery tube
save me typing
https://sofirnlight.com/products/blf-lt1-lantern
save me typing
https://sofirnlight.com/products/blf-lt1-lantern
slim_boy_fat
Member
- Messages
- 29,363
- Location
- Scottish Highlands
Well, sometimes the remnants are.....and in wheelie bins......and in hedges.....and, well you get the picture.
eLuSiVeMiTe
Member
- Messages
- 16,438
- Location
- ......
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,988
- Location
- Going Away.
His and her Zippos.
£2 for the pair.
Car boot this morning.
Both are Zippos, not copies.
Do Zippos still have the lifetime warranty?
£2 for the pair.
Car boot this morning.
Both are Zippos, not copies.
Do Zippos still have the lifetime warranty?
Parm
Respect The Sound System
- Messages
- 18,018
- Location
- Towcester
Yep, their place is in Chiswick. Postage can fun due to the wadding being filled with a flammable liquid.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 19,988
- Location
- Going Away.
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 17,986
- Location
- East Yorkshire
After a few days away in Girvan with the inlaws it was back home yesterday, then over to Nantwich this morning to collect, ball of fluff. We have called her Evie.
And while I was away the best prezzie a man could want... bits for my Sunbeam. Cheers Andrew
And while I was away the best prezzie a man could want... bits for my Sunbeam. Cheers Andrew
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 17,986
- Location
- East Yorkshire
She is. So laid back, all the pups had been played with and acclimatised to different sounds, sights and smells.
some copper tubing......
..... I went to a meeting of model engineers last Friday and during a conversation someone asked me how I was doing with the steam engine for my model boat,
to which I replied "I havn't even designed it yet, but I think I'll make the boiler first and Im thinking of either a 28mm diameter watertube boiler or a 35mm diameter multi-tube vertical boiler."
He said "thats just standard copper pipe isn't it"
I replied "yeah its thinner wall than the stuff that normally get used, so should be better for steaming of smaller boilers"
He replied "how much do you need I think I've got some"
I replied " only a few inches the longest boiler will only be a couple of inches long"
later in the conversation I mentioned that I'd be going to Bolton Steam Museum today.
anyway we both turned up at the museum today, which is roughly 40 miles from where we were on Friday and he gave me these.
70cm lengths of 28 and 35mm cooper tube
40cm length of 1/4 diameter phosphor bronze bar for making boiler bushings with.
now just before that I had been speaking to someone else who used to work a an engineering company and a month before I had taken him an old catalog from them to show him. it brought back good memories for him so I told him that I would copy him the catalog. (he could have had the catalog but I got it to donate to the local industrial museum). so I copied it for him and there were nearly 50 pages in it, and presented it in a display book.
and this was the catalog I posted about in here
https://www.mig-welding.co.uk/forum/threads/portable-drills.96625/#post-1452486
somehow I think this is what you can call karma and one good deed deserves another.....also means I have no excuse not to start on the next steam engine as someone else mentioned about the Doncaster Model Engineering show at the end of May, so its far enough away to see what can do, although I hate deadlines.
..... I went to a meeting of model engineers last Friday and during a conversation someone asked me how I was doing with the steam engine for my model boat,
to which I replied "I havn't even designed it yet, but I think I'll make the boiler first and Im thinking of either a 28mm diameter watertube boiler or a 35mm diameter multi-tube vertical boiler."
He said "thats just standard copper pipe isn't it"
I replied "yeah its thinner wall than the stuff that normally get used, so should be better for steaming of smaller boilers"
He replied "how much do you need I think I've got some"
I replied " only a few inches the longest boiler will only be a couple of inches long"
later in the conversation I mentioned that I'd be going to Bolton Steam Museum today.
anyway we both turned up at the museum today, which is roughly 40 miles from where we were on Friday and he gave me these.
70cm lengths of 28 and 35mm cooper tube
40cm length of 1/4 diameter phosphor bronze bar for making boiler bushings with.
now just before that I had been speaking to someone else who used to work a an engineering company and a month before I had taken him an old catalog from them to show him. it brought back good memories for him so I told him that I would copy him the catalog. (he could have had the catalog but I got it to donate to the local industrial museum). so I copied it for him and there were nearly 50 pages in it, and presented it in a display book.
and this was the catalog I posted about in here
https://www.mig-welding.co.uk/forum/threads/portable-drills.96625/#post-1452486
somehow I think this is what you can call karma and one good deed deserves another.....also means I have no excuse not to start on the next steam engine as someone else mentioned about the Doncaster Model Engineering show at the end of May, so its far enough away to see what can do, although I hate deadlines.
indy4x
Forum Supporter
- Messages
- 3,576
- Location
- Pontypool, South Wales. UK
FIL was showing me his new lathe, he's got rid of his Harrison 140 and a table top mill/lathe thingy (make unknown but surprisingly accurate) and bought a new Warco bench top lathe. Its all he needs as only make firing pins and other small stuff.
He had these left over from his Harrison and they are now mine
He had these left over from his Harrison and they are now mine
