- Thread starter monkeymark
- Start date
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,337
- Location
- Going Away.
See my post Thursday 1st Nov. #11720
I got this Bit and brace Hole saw.
Well after a few hours work, coffee and help from a friend.
It has ended up as this.
Eclipse no 280 tank and washer cutter.
The pilot drill was just long enough to fit into a sharpening jig and took and edge.
The cutter I had to do by hand and a slip stone.
Any one know an easy way of sharpening them?
I got this Bit and brace Hole saw.
Well after a few hours work, coffee and help from a friend.
It has ended up as this.
Eclipse no 280 tank and washer cutter.
The pilot drill was just long enough to fit into a sharpening jig and took and edge.
The cutter I had to do by hand and a slip stone.
Any one know an easy way of sharpening them?
Olderisbetter
Member
- Messages
- 3,938
- Location
- Wolverhampton
Is copper fetching a good price again? I have 2 tanks full of off cuts that are odd bits or old pipe, i call it my christmas fund£105!
Weighed this in with a bit of old copper pipe yesterday.
View attachment 158403
Not bad.
I asked the man to weigh the truck (Toyota Surf) while on the weighbridge and it came out at 2 tons with an empty fuel tank but the wife in the passenger seat......
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
A Dremel tool with a stone for sharpening might be easier.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,337
- Location
- Going Away.
@Olderisbetter
Clean copper £2.00 a Killo.
Clean bright copper ( striped wire) £2.50 a killo.
Mixed copper £1.50 a killo.
But it is changing everyday
Clean copper £2.00 a Killo.
Clean bright copper ( striped wire) £2.50 a killo.
Mixed copper £1.50 a killo.
But it is changing everyday
God mode restorations
Member
- Messages
- 8,149
- Location
- uk colchester
Today I acquired.
This fantastic 8.5 inch four jaw Taylor chuck
. In great condition with chuck key. It will make a fantastic addition to my empire lathe.
This fantastic 8.5 inch four jaw Taylor chuck
. In great condition with chuck key. It will make a fantastic addition to my empire lathe.
dobbslc
Forum Supporter
- Messages
- 13,291
- Location
- Hertfordshire UK
Is copper fetching a good price again? I have 2 tanks full of off cuts that are odd bits or old pipe, i call it my christmas fund
It's an old gravity cylinder so has a huge solid coil inside, about 35kg worth!
Parm
Respect The Sound System
- Messages
- 18,019
- Location
- Towcester
I got one a few years ago. Used the sheet to make a bar top in my man cave. The domed top has made a lid for a massive frying pan. The dished base made a bowl as a present. The coil is still sitting there waiting for a use
Dieselman 63
Forklift Certified
- Messages
- 5,853
- Location
- Wellington, New Zealand
Pleased for you, I remember you saying you were hunting one
I was thinking that as well, @bigegg I'm guessing you have a lot of dual carridgeway "A road" around your way otherwise if it's only a single then you should only be doing 50.
A lot and I do mean a lot of people don't realise (or don't care that) there is a difference between a "car derived van" and a van, if it's a proper van then it's classed as under 7.5t goods vehicle as far as speeds go.
@Justme will be along shortly to quote chapter and verse.
eLuSiVeMiTe
Member
- Messages
- 16,439
- Location
- ......
Hardware closing down sale, got 6 packs of scotchbrite-style (Sia Blue Line ones) for a £1 a pack! Mix of general and very fine.
Oh and some funny glue and a sprayer thingy that attaches to any drinks bottle.
Other thing, from an autojumble was this collet chuck, but I can't find much information about it. Wonder if anyone recognises it?
It's on a MT3.
Oh and some funny glue and a sprayer thingy that attaches to any drinks bottle.
Other thing, from an autojumble was this collet chuck, but I can't find much information about it. Wonder if anyone recognises it?
It's on a MT3.
Olderisbetter
Member
- Messages
- 3,938
- Location
- Wolverhampton
I changed a fair few copper combination cylinders in small rentals for more economical 15 litre hot water units, The added bonus was all the scrap cylinders, I had about 20 at one point and made a few into plant pots and light fittings or shades.
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,679
- Location
- Leeds, West Yorkshire
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,337
- Location
- Going Away.
I have found out some history of the tools I got.
The small pillar drill. it is not a Stanley drill.
It pre dates Stanley.
It is a Goodell Pratt, there is a link for those interested.
https://en.wikipedia.org/wiki/Goodell-Pratt
But there is a faint name stamped into the casting under the brass plaque.
I think it says "Trojan"
I am still hunting and bidding on the vice what should of came with it..
Thanks to @Dieselkid 63 who pointed me in the correct direction.
It is a a 1950's Sigma semi-rotary hand pumps.
They were used in the ROC bunkers, REME repair shops and oddly on O Class Submarines.
What I can find out the short handle would indicate it is Naval version. The ROC had longer handles.
It is in bits, in de-greaser.
I called a favour in to have the asbestos gasket material removed.
The Tap.
Ussers Brewery.
Dieselman 63
Forklift Certified
- Messages
- 5,853
- Location
- Wellington, New Zealand
Glad to be of help. As I say, likely bulletproof for the nuclear war that didn’t come.
ROC post hunting is a fun little hobby if you’re interested. They’re gridded around the country and there’s always one close by. All decommissioned by 1991. Some have more established overground facilities, watch towers and concrete enclosures. Many flooded and burnt out but some restored to the condition they were in. I remember years ago when Wigan police station was abandoned someone broke in (ironic) and stole what later appeared on eBay as ‘fancy telephone’. The special BT ROC telecom gear wasn’t for general sale and is in short supply and sells for a premium to the enthusiasts.
Hood
I am obsessed.
- Messages
- 17,784
- Location
- Carnoustie, Scotland
A guy I used to do a lot of jobs for owns one, or rather his wife does. It is the one at Peasie Hill , Elliot, Arbroath. She has a small museum there with open days now and then.
Dieselman 63
Forklift Certified
- Messages
- 5,853
- Location
- Wellington, New Zealand
For those interested
https://en.wikipedia.org/wiki/List_of_Royal_Observer_Corps_/_United_Kingdom_Warning_and_Monitoring_Organisation_Posts_(A–E)
And the map is really quite cool
http://www.roc-heritage.co.uk/posts-map.html
https://en.wikipedia.org/wiki/List_of_Royal_Observer_Corps_/_United_Kingdom_Warning_and_Monitoring_Organisation_Posts_(A–E)
And the map is really quite cool
http://www.roc-heritage.co.uk/posts-map.html
Tinbasherdan
Bodger in chief
- Messages
- 7,435
- Location
- Bolton, England
Got pulled by the police one night on a golf course (there was a right of way through it) whilst looking for an ROC post. They asked what I was doing and I told them I was looking for a nuclear bunker, to which they replied “oh aye, many of them on here is there” I replied “well you’re stood next to the hatch”
They were actually quite interested when I showed them details on my phone
Farside
Badly Welded Man
- Messages
- 6,288
- Location
- Ireland
Was that including the 20kg of limescale in the bottom?
