Stuff you have made today

[Kram]

Few months back I wanted to get some more chainsaw lanyards, but the ones I bought before were not available. Same shop, price had doubled but I got two of their new ones. I realised after they were missing the harness stowing ring

Taken me a while to find some suitable steel rod, about 3-4mm diameter. Bent it up around a 44mm bar and sliced the top to get a load of rings. Slide the webbing on, protect the webbing and weld.

The first two tests went perfectly, but then with the webbing I was messing it up!
Using 1.6mm rods at 50A. They do need to be smoothed off..

 

[Memmeddu]

Machine shop jobs

Truck fuel tank

With a puncture

Cleaned up and welded

Building up worn bushing belonging from a sewerage water depurator .
It guide a shaft connected to a conveyor to pick up organic human wastes.
And yes it not rust what you are looking at

 

[Dozzer]

More workshop/shed tidying. few bits of old fence rail quickly planed on edge and drilled at about 25deg, 22 bits of old rebar cleaned up and oiled, some gorilla glue and no more tripping up over loose Rakes, Forks etc.

 

[badabec]

I always hang my shovels, spades and forks the other way round, then the edges don't stick out.

 

[Dozzer]

I always hang my shovels, spades and forks the other way round, then the edges don't stick out.

I just hung them up so they are out the way, i will let the head gardener sort out the details, she was happy with the layout.
Im not into gardening unless it involves at least a 2T excavator

 

[Hood]

Finished off making the hinges and plungers for a boats handrails. Still have to slot the rail and fix in the plungers but have to cut the rails on the boat first.

Also skimmed a set of hauler plates.

And reduced the dia of some discs from 300mm to 288mm.