Stuff you have made today

[Barking Mat]

Only the once when returning home.

Come on, you know how to do it, stick it in the shed / workshop, if she spots it and asks, just say, I've had that for ages....

I'm a bulk dealer of dust, if it's new and you need dust to make it look old, just pm me, I can do discounts on bulk buys.

I have a sideline in cobwebs too.

 

[redlig]

Not even once for us single blokes.

Don't you have an alter ego to placate ?

 

[MattF]

Don't you have an alter ego to placate ?

I don't believe so, but I'll ask him.

 

[redlig]

Come on, you know how to do it, stick it in the shed / workshop, if she spots it and asks, just say, I've had that for ages....

I'm a bulk dealer of dust, if it's new and you need dust to make it look old, just pm me, I can do discounts on bulk buys.

I have a sideline in cobwebs too.

OH ! the ladies shoes trick. Thanks for the dust and cobweb offer but we do have a woodstove and a few angle grinders around plus tame spiders running wild . To be honest I've never had a problem buying " toys" home as long as they don't breath or sigh.

 

[northwest]

Well I finally got the barrel off the bloody revolver I am fixing. Obviously been subjected to the ministrations of a "gun plumber". Locktite has it's place but NEVER on a barrel, this could have so quite easily have destroyed the threads in the frame resulting in a scrap gun:





Fought me every inch of the way and it is a good job the barrel is scrap because I have certainly finished it off. From now on I am going to just assume Locktite has been used and get some heat into these things before I start.

 

[cheb]

Come on, you know how to do it, stick it in the shed / workshop, if she spots it and asks, just say, I've had that for ages....

I'm a bulk dealer of dust, if it's new and you need dust to make it look old, just pm me, I can do discounts on bulk buys.

I have a sideline in cobwebs too.

Would you be interested in buying my extensive collection of pre-patinated bolts, nuts and washers?

 

[The_Yellow_Ardvark]

With or without a sack?

 

[Robotstar5]

Well I finally got the barrel off the bloody revolver I am fixing. Obviously been subjected to the ministrations of a "gun plumber".

I like that term, guessing it's the gun trade version of "Dave down the pub", one of the best smiths we had in Birmingham was an ex-army armourer, most folks in my gun club used him.

 

[addjunkie]

Well I finally got the barrel off the bloody revolver I am fixing. Obviously been subjected to the ministrations of a "gun plumber". Locktite has it's place but NEVER on a barrel, this could have so quite easily have destroyed the threads in the frame resulting in a scrap gun:

View attachment 400560

View attachment 400559

Fought me every inch of the way and it is a good job the barrel is scrap because I have certainly finished it off. From now on I am going to just assume Locktite has been used and get some heat into these things before I start.

Thatll polish out, 5 minutes with a bit brasso

 

[Seadog]

At last, I've got my toolholders in front of me, rather than behind. That'll save me at least 5 seconds per tool change

I've more than enough spares to fill the unpopulated slots, as and when.

 

[addjunkie]

At last, I've got my toolholders in front of me, rather than behind. That'll save me at least 5 seconds per tool change

View attachment 400598

I've more than enough spares to fill the unpopulated slots, as and when.

Are they all numbered with your offsets pre programmed?

 

[The_Yellow_Ardvark]

MONEY.

Mad Feng Seig lady came by.

It is not £500 I made.
For this lot.

The Lil blob made only £80

 

[Hood]

Turned some rollers from Oilon, just as horrible to turn as Nylon but you do get a very nice finish.

 

[addjunkie]

Didnt make this little chap, but delivered him, spent all day trying to get him to stand and feed. Tubed 150mls of goat colostrum into him. Held him while hes had a plasma transfusion, and managed to get him to latch to his mum, but he's still not able to actually get up. So Ill be lifting him to mum every 2 hours through the night!

 

[redlig]

MONEY.

Mad Feng Seig lady came by.

It is not £500 I made.
For this lot.

View attachment 400632


View attachment 400633


View attachment 400634


The Lil blob made only £80

worth more if it was chromed

 

[The_Yellow_Ardvark]

worth more if it was chromed

No. Less.

 

[Seadog]

I finally got around to fitting some flexible metal sheathing to one of my DRO read heads. Non-standard when I bought the setup, but subsequently fitted. Free from AMTS(NW) Ltd. (Originally EMS-i).
I decided to try to prize the existing terminating collar from the head, fully expecting to break wires.

Amazingly, it still worked, so on with making some ferrules.

Then it was just a case of mixing some epoxy and fitting them, then reterminating the lead.

Jobs a good 'un.

All tidied up, at long last

 

[James1979]

I finally got around to fitting some flexible metal sheathing to one of my DRO read heads. Non-standard when I bought the setup, but subsequently fitted. Free from AMTS(NE) Ltd. (Originally EMS-i).
I decided to try to prize the existing terminating collar from the head, fully expecting to break wires.

View attachment 400658

View attachment 400659

Amazingly, it still worked, so on with making some ferrules.

View attachment 400660
Then it was just a case of mixing some epoxy and fitting them, then reterminating the lead.

Jobs a good 'un.

View attachment 400661

All tidied up, at long last

View attachment 400663

Did you make that monitor mount or buy it? I could do with one like that for laptop in the truck.

Been looking for ball mounts for ages but not seen one heavy enough.

 

[Seadog]

I adapted the mount which came with the display. I added a knuckle to allow tilt.

 

[James1979]

I adapted the mount which came with the display. I added a knuckle to allow tilt.

Bugger. I mean it’s a very good job and all but I was hoping you’d tell me you’d bought it and then go on to tell me where