mini mill

[mtt.tr]

hi i was looking for something like this CLick here

 

[hotrodder]

Shenion provided a link to that sort of thing a few posts back...

Are you talking about the Rodney Milling atachment?

Then there is the AMOLCO.

Slightly different to the toy clarke in that it takes it's drive from the headstock via a morse taper and flexible coupling but home and workshop machinery are listing one. Prices appear high on their site but note that they are usually up for a good haggle

 

[mtt.tr]

Shenion provided a link to that sort of thing a few posts back...


Slightly different to the toy clarke in that it takes it's drive from the headstock via a morse taper and flexible coupling but home and workshop machinery are listing one. Prices appear high on their site but note that they are usually up for a good haggle

Out of my price range sadly im looking at about £280

 

[mtt.tr]

i have decided im going to sort out the bearings and get a milling attachment an maybe in the future when i can afford it i will by a proper mill

 

[mtt.tr]

If the chuck moves up and down it is not aligment but adjustment, the front bearing is a taper bronze bearing, and the rear is 2 angular contact ball bearings, bearing adjustment is shown on page 25 for the manual, found a copy of the manual here http://www.metalwebnews.com/manuals/myford-super7lathe.pdf
Be carefull to if you set to bearings to tight you could damage the front bearing.

Thanks this really help bearing sorted out now