Hi all, first post!
Most of my welding has been with a combined inverter MMA/TIG machine (in MMA mode only!) and I also have a MIG machine sat in the workshop unused for several years. The only identifying label is MIG 195 on the front. It has 3 switches (Power, 1/2 and Low/High) plus a wire speed dial. There is no settings chart and I don't have a manual.
Could anyone suggest what the 1/2 and Low/High correspond to in terms of current/material thickness etc.
Thanks.
P.S. I have 0.8mm mild steel wire/nozzle fitted.
Most of my welding has been with a combined inverter MMA/TIG machine (in MMA mode only!) and I also have a MIG machine sat in the workshop unused for several years. The only identifying label is MIG 195 on the front. It has 3 switches (Power, 1/2 and Low/High) plus a wire speed dial. There is no settings chart and I don't have a manual.
Could anyone suggest what the 1/2 and Low/High correspond to in terms of current/material thickness etc.
Thanks.
P.S. I have 0.8mm mild steel wire/nozzle fitted.