NickyEng
Brown belt in Origami
- Messages
- 831
- Location
- Argyll Scotland
My new GYS 220 AC-DC tig has a level of functionality which defies belief, mixed ac/dc, split mixed waveforms, finger print analysis lol
C
Chris Stevens
Guest
Not sure if half of the features on modern machines are actually needed? But the Hitachi seems to have mixed waveform, and that dates back to 1997!
NickyEng
Brown belt in Origami
- Messages
- 831
- Location
- Argyll Scotland
That shows you then what that machine really was and how ahead of its time it was.
There's no half measures with anything Hitachi
Jim Davey
R H Davey Welding Supplies Ltd
- Messages
- 5,736
- Location
- Southampton
Depends who is using it. Aerospace guys tend to know what they want and like a set with enough features for them to be able to get what they need from a set. And that was where most of the Panasonic and Hitachi TIGs ended up, in aerospace shops.
Richard.
Member
- Messages
- 18,344
- Location
- Cambridgeshire
Your old castotig had that too which dated back to 1993. I agree there is a lot of nonsense thrown on these units and a good % of it I cannot see the aero space guys using either. The Kempis are probably the worst for filling a panel with pointless tools.
HughF
Member
- Messages
- 6,482
- Location
- Work: Dorchester, Workshop: Corfe Castle, Wife's place: Frome
I cut my teeth on a syncrowave 300, no pulse, doing 1.2mm alloy stuff predominantly. Some of the best aluminium work I've done was with a transtig 375.
neither are feature rich...
Frequency control is nice, but you can get by without it. Balance control is the must-have in my book.
neither are feature rich...
Frequency control is nice, but you can get by without it. Balance control is the must-have in my book.
Richard.
Member
- Messages
- 18,344
- Location
- Cambridgeshire
Id prefer a fixed balance (providing it's fixed some where half decent) and have variable frequency control personally. Rarely do I alter the balance unless I have a manky bit of cracked cast Alu to sort out.
HughF
Member
- Messages
- 6,482
- Location
- Work: Dorchester, Workshop: Corfe Castle, Wife's place: Frome
Seems to be all I get to do these days - 'can you fix this?'....
Richard.
Member
- Messages
- 18,344
- Location
- Cambridgeshire
Me too. I'm quite involved with the track bike scene and out of a group of Us I'm the only one with an ACDC Tig so you can imagine I get a few cases and swing arms etc to repair. I sold my last bike last year yet I still get them passed to me when the guys have a spill. If I was to start up plastic welding I don't think I'd need a day job lol.
I hate it haha!
NickyEng
Brown belt in Origami
- Messages
- 831
- Location
- Argyll Scotland
I make it a policy never to weld cracked marine manifolds. Cast iron or racing aluminium. That is a horrible job, clean, clean, more clean, crap burns out from the burning fuel etc. yuk.
Done plenty rudders and some small prop repairs but just one blade corner as it really needs balanced on the high performance chevy and corvette engines i mainly work on.
Done plenty rudders and some small prop repairs but just one blade corner as it really needs balanced on the high performance chevy and corvette engines i mainly work on.
C
Chris Stevens
Guest
Took side covers off Hitachi today, and it looks ok inside. Its very well made, and I think there is a possibility of it working. Will leave it to dry out for a couple of days, then fit a plug and hope for the best.
Richard.
Member
- Messages
- 18,344
- Location
- Cambridgeshire
Dry out???
Has it been for a swim?
- Messages
- 6,175
- Location
- SW Scotland
C
Chris Stevens
Guest
Any machine which has been in storage for any amount of time might be damp internally, so its a good idea to take the sides off check for any moisture, and blow out dust at the same time. No sign of damp, but dried out with warm air anyway, before fitting a plug and trying it. Switches on ok, fans both work, and will check it welds as soon as cooler sorted out, and fitted torch to it.
Appyasme1
Member
- Messages
- 1,385
- Location
- Lancashire
Castolin were a veYour old castotig had that too which dated back to 1993. I agree there is a lot of nonsense thrown on these units and a good % of it I cannot see the aero space guys using either. The Kempis are probably the worst for filling a panel with pointless tools.
Another fan of Sanrex.Welcome to the club!!!!!!!!!!!
Richard.
Member
- Messages
- 18,344
- Location
- Cambridgeshire
Special "Finding Nemo" edition
Any chance of a photo Chris?
Yep as above.
Come on Chris, pics or it didn't happen.
- Messages
- 6,175
- Location
- SW Scotland
He's trying to find his snorkel and mask.
