Help to choose tig welder.Cebora, Lorch, Cea , Rehm , Fronius, Bohler, Migatronic?

[AlexV]

I want to buy a top ac-dc single phase tig welder.
For stainless I have a cebora win tig 220m and I'm very happy with that machine but I don't know if cebora is that good for aluminum. I live in Crete a big island and I cannot find a demo for any of big brands.

 

[Tangledfeet]

Hi Alex,

I'd pick models from each, compare the specifications - and then consider your favourite colour! There's a few Lorch fans on here (I'm one, I've got the MicorTIG) but then I've also got a Bohler MIG... I'm a fan of German engineering which might explain. Oh, and I've also recently bought a VW Golf!

 

[Munkul]

There would be 5 machines on my shortlist. 3 are designed and built in Germany/Austria.
Lorch T220 (handytig 200 if you can live with only 200 amps and want to save money)
Fronius magicwave
EWM tetrix

The last 2 are good brands, not sure where they are made these days.
Miller dynasty
Kemppi minarc

My personal and business money goes on Lorch. I've had experience with 5 or 6 of their pulse MIG sets now and every one of their TIG range from Micortig up to V40 top end machines. Currently I personally own 2 Lorch S3s, a Micorstick and a Handytig 200 ac/dc. The only thing I'd change the handytig for is a T300.

 

[Cheesie]

Go by your closest reputable dealer and what they sell I've used cheap Chinese and expensive German, the most deciding factor on quality of weld was time under the hood

 

[zzr1200]

I've owned/used a Lorch 220 ac/dc pro for about 12 years now, purchased from/via Matt1978 (ex-demo machine I believe), top machine. 16 amp 240 volt mains input. .

The only thing I would have changed on my original order, would be a 7m torch lead......

 

[Wozzaaah]

Go by your closest reputable dealer and what they sell I've used cheap Chinese and expensive German, the most deciding factor on quality of weld was time under the hood

I would imagine dealers on Crete are very few and far between.

 

[Munkul]

The only thing I would have changed on my original order, would be a 7m torch lead......

4m tig torches are the most frustrating thing, i always spec 8m torches.
I love the lorch powermaster torches, they're so comfortable and easy to use. Definitely worth the extra in my opinion

 

[oilcooled :)]

Fronius I wave 230 here top welder, need a minimum of 8m lead 4 m waste of time. 12 metre is the right job

 

[AlexV]

I would imagine dealers on Crete are very few and far between.

Dealers here have only cheap Chinese brands that are for beginners only(and maybe not even for that)

 

[AlexV]

Fronius I wave 230 here top welder, need a minimum of 8m lead 4 m waste of time. 12 metre is the right job

Fronius for sure is on top 3 brands in the world,have a ignis 180 and it is a very nice mma machine(not the best for me) but I don't like the policy of fronius that you have to pay extra firmware to have everything machine can offer.

 

[Munkul]

Fronius for sure is on top 3 brands in the world,have a ignis 180 and it is a very nice mma machine(not the best for me) but I don't like the policy of fronius that you have to pay extra firmware to have everything machine can offer.

All of the best welding brands do this nowadays. Every single one.