Johnnybravo
Member
- Messages
- 3,695
- Location
- Northiam
As long as it’s over the hills and far away….
- Thread starter skotl
- Start date
Morrisman
Forum Supporter
- Messages
- 8,964
- Location
- Staffordshire, England
Here's a pic of my xmas pressies:
Yes, that is the entirety: nada. I told my daughter not to buy anything, as she is skint and just trying to make ends meet at the moment. She has come over and stayed with me for xmas, with her daft little dog, which is more than enough for me.
We burnt some pig meat, roasties, pigs in blankets, then watched TV all evening.
Yes, that is the entirety: nada. I told my daughter not to buy anything, as she is skint and just trying to make ends meet at the moment. She has come over and stayed with me for xmas, with her daft little dog, which is more than enough for me.
We burnt some pig meat, roasties, pigs in blankets, then watched TV all evening.
plewlandsbob
Member
- Messages
- 426
- Location
- Morayshire, Scotland
Did your Son/ Daughter, know about the other, or was it a surprise, for everyone?We had 13 in for Christmas dinner, and we got two big surprises from one of our daughters and one of our sons, this was in the first card.
View attachment 378122
And this was in the second.
View attachment 378123
Congratulations, to you and your Family.
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
God little kits. Gonna grab a laser for mine for ply.
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,798
- Location
- Sevenoaks, UK
Can I ask specifically what one you have and from where? I was looking at one that came with a 7W laser as well as a router. In part I didn't push the button as there are so many variations and indeed poor reviews.
Be good to get a recommendation.
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
I bought one badged vevor 3018 pro.direct from vevor
No laser. The only issue was a dead power supply but I planned on replacing it anyway it wasn't a issue.
Even had it milling brass.
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,798
- Location
- Sevenoaks, UK
This one?
Product Safety Report: Vevor CNC Engraving Machine, S3018 Pro (2207-0051)
Product Safety Report for Vevor CNC Engraving Machine, S3018 Pro presenting a serious risk of fire and burns as the fuse had not been supplied with an adequate amount of granular filler.
eLuSiVeMiTe
Member
- Messages
- 16,441
- Location
- ......
Ha. Yeah I'd forgotten about that. I saw the recall and ignored it as the PSU was in the bin and replaced with a 12 amp supply in its own exclosure. Probably a good thing it was doa.This one?
Product Safety Report: Vevor CNC Engraving Machine, S3018 Pro (2207-0051)
Product Safety Report for Vevor CNC Engraving Machine, S3018 Pro presenting a serious risk of fire and burns as the fuse had not been supplied with an adequate amount of granular filler.www.gov.uk
I have a feeling I bought mine after that recall.
maybe a petrol engine.Tempting me as I need a set for my G-wiz. Plan is to do home to Lands End, John O'Groats than back to Stoke for charity - a round trip for around 1800 miles. Seeing the original G Wiz lead acid batteries only give it a range for 40 miles I think I need something better
stuvy
Member
- Messages
- 9,304
Don’t be daft they ruin the environment
those batteries just ruin the car.Don’t be daft they ruin the environment
plewlandsbob
Member
- Messages
- 426
- Location
- Morayshire, Scotland
Got a book about, International Harvester tractors, a Knipex Christmas bauble, with a tiny set of Cobras inside. Some Hobgoblin gold, lots of Maltesers and couple of tee shirts.
Mick Annick
Forum Supporter
- Messages
- 2,896
- Location
- Burgundy, France (450 miles SE of Somerset)
Bleu de travail, to replace the one I burnt a big hole in
skotl
Forum Supporter
- Messages
- 10,187
- Location
- Edinburgh, UK
A very generous 2 star review on AmazonThis one?
Product Safety Report: Vevor CNC Engraving Machine, S3018 Pro (2207-0051)
Product Safety Report for Vevor CNC Engraving Machine, S3018 Pro presenting a serious risk of fire and burns as the fuse had not been supplied with an adequate amount of granular filler.
Amazon.co.uk:Customer reviews: VEVOR Upgrade CNC 3018 Pro Max 3 Axis GRBL Control CNC Machine Wood Router Engraver with Offline Controller 5mm ER11 PCB and 10PCS 3.175mm + 4 Sets CNC Plates + ER11 Collet Set, Black
Find helpful customer reviews and review ratings for VEVOR Upgrade CNC 3018 Pro Max 3 Axis GRBL Control CNC Machine Wood Router Engraver with Offline Controller 5mm ER11 PCB and 10PCS 3.175mm + 4 Sets CNC Plates + ER11 Collet Set, Black at Amazon.com. Read honest and unbiased product reviews...
www.amazon.co.uk
Migmac
Forum Supporter
- Messages
- 8,639
- Location
- Kintyre. Scotland
Been there too, not for a few years though. It was a police station another building and lots of wee stuff. Took hours and a few bottles of beer! Nephew got the tanks and other military stuff, he built it once and refused to take it to bits because it took so long to build.
Migmac
Forum Supporter
- Messages
- 8,639
- Location
- Kintyre. Scotland
I need to get one of those mugs
Arc Tourist
Member
- Messages
- 5,019
- Location
- Wales
I received some chocolate, a couple of shirts, one from a friend which complimented a BSA workshop manual I have. My Niece gave me one of those lighted & magnifying glasses for the workshop, and my Wife sprung for a Pulsar thermal imager which I had been considering. It was acquired when the black friday deals were on offer, but I couldn't wait till Christmas to open the package. 
RWD3M
Forum Supporter
- Messages
- 3,700
- Location
- Wiltshire, UK
I take it the RAC van is in another box?
Morris
Member
- Messages
- 1,804
- Location
- Northamptonshire.
You ask her!Best ask her to play over the hills and far away
She's a feisty intelligent lass from near to Newcastle who after escaping her abusive first husband vowed never to take cr@p again.
Good luck
