Fintray
Forum Supporter
- Messages
- 832
- Location
- Aberdeenshire (UK)
Some pictures of my gasifying wood burning boiler build (still in progress) that may be of interest.
5mm steel plate for the build
Boiler tube end plates
Faithful Startrite drill and Starrett 73mm holesaw
Schedule XXS 6" to 4" concentric reducer for gasification nozzle
Schedule 40 90 degree long bends
Holes cut in front panel for cleaning and loading doors
Bending steel round nozzle to create air passage for secondary air
Holes drilled in nozzle for secondary air 4 x 10mm
Steel ring welded round nozzle
First test fit of boiler tubes to end plates
5mm steel plate for the build
Boiler tube end plates
Faithful Startrite drill and Starrett 73mm holesaw
Schedule XXS 6" to 4" concentric reducer for gasification nozzle
Schedule 40 90 degree long bends
Holes cut in front panel for cleaning and loading doors
Bending steel round nozzle to create air passage for secondary air
Holes drilled in nozzle for secondary air 4 x 10mm
Steel ring welded round nozzle
First test fit of boiler tubes to end plates
-
DSC_0325.jpg44 KB · Views: 3,776
-
DSC_0326.jpg49.4 KB · Views: 3,670
-
DSC_0327.jpg157.8 KB · Views: 3,567
-
DSC_0335.jpg42.7 KB · Views: 3,557
-
DSC_0338.jpg58.7 KB · Views: 3,574
-
DSC_0334.jpg101.9 KB · Views: 3,538
-
DSC_0333.jpg133.5 KB · Views: 3,554
-
DSC_0339.jpg57.2 KB · Views: 3,545
-
DSC_0340.jpg45.3 KB · Views: 3,552
-
DSC_0350.jpg48.4 KB · Views: 3,620
-
DSC_0341.jpg53.3 KB · Views: 3,709
-
DSC_0349.jpg62.8 KB · Views: 3,916
Last edited: