air tools

[gizmo]

i am after some air tools but do not no wether to get a kit like this
or individual tools



thanks graham

 

[Wozzaaah]

Tiny picture but looks like a windy gun, die grinder, ratchet, chisel and associated tooling?
That's a decent selection and will be quite versatile. How much have you seen that for and what make is it?

 

[gizmo]

thay are on ebay soz a bout the small pic lol

dont no the make it was just a randum pic

got about £60 to spend

 

[the snooper]

is your compressor big enough to run them ?

 

[gizmo]

shud be its 50L 11bar which is 156ish psi most air tools will run off 90psi

 

[shenion]

PSI is not the issue, it is if the compressor can deliver the CFM needed for the tools.

 

[brightspark]

the largest air user in kit looks like a die grinder unless u are using it constant i cant see a problem bigger the better but where do u draw the line

 

[the snooper]

unless you have a 15cfm pump on it the tank will empty in no time even 15 cfm wont run them all day even that would fade out sooner or later an air ratchet also uses quite a bit

 

[brightspark]

unless you have a 15cfm pump on it the tank will empty in no time even 15 cfm wont run them all day even that would fade out sooner or later an air ratchet also uses quite a bit

how many bolts are u undoing 4 car wheels i only use a 14cfm comp for nearly everything even small shotblasting jobs but if needed i have 28cfm comp and 90 cfm . its not industry d i y

 

[gizmo]

well at the end off the day it shuld be ok for what i need. if i empty it an 2min grinding i will just go put the kettel back on and have a nother cup of coffee or get the 240v grainder out. that will keep going a lot longer than any conpresser trust me

thanks for all your usefull info but i thank now my conpresser will do me proude