Air rifle telescopic sights

[tom2207]

I cut mt teeth with a .303 open sights and a thousand yards at Hythe Ranges ,, lot to be said for the simple things in life.
Its still nice to look through a nice piece of glass though .
I always reckon that if you can shoot a spring powered air gun with open sights well , you can shoot anything.

 

[123hotchef]

I cut mt teeth with a .303 open sights and a thousand yards at Hythe Ranges ,, lot to be said for the simple things in life.
Its still nice to look through a nice piece of glass though .
I always reckon that if you can shoot a spring powered air gun with open sights well , you can shoot anything.

I use to love shooting the 303 even being target man behind the hill wad fun

 

[Keithmac]

Anyone got any suggestions for a good starter gun?.

Watched a guy from Blackpool going through his 2nd hand stock and they were anywhere from £400 upwards?.

Had some lovely kit mind!.

 

[Robotstar5]

This talk of scopes reminds me of a time in the 80's, we were on the flat roof of the the shooting club doing a bit of maintenance when the club secretary (wry sense of humour) made the comment that Saltley gas works would be an easy shot from here with iron sights the day Arthur Scargill was there rallying the pickets

 

[123hotchef]

Anyone got any suggestions for a good starter gun?.

Watched a guy from Blackpool going through his 2nd hand stock and they were anywhere from £400 upwards?.

Had some lovely kit mind!.

my wifes cousin ust got a decent air rifle in a bag with nice scope thin he said it was 150 or 180 from https://www.pellpax.co.uk

 

[Onoff]

On my .22 Original 45 (a powerful springer that's got an uprated spring), I had problems with the scope/mounts moving. This from day one, before I put the new (Ox?) spring in.

I replaced the countersunk screws in the dovetail rail with cap head screws so there were little, round, "towers" sticking up. I started with a two piece scope mount, tried a one piece, then went back to the two piece.

The rear mount can't move any further back than the cap head screw.

The scope can't move any further back than the mount.

I'd show you but the gun is in bits awaiting me taking the plunge to have it professionally re-blued.

 

[Onoff]

Found a picture of the gun pre stripping. You can just see the 3 cap head screws sticking above the scope rail. You'll note the rear mount abuts the rear screw. Then how the scope itself abuts the other side of the rear mount. Zero movement and the sights remain set.

 

[123hotchef]

scope is now rotated 90 degrees and straight ready to be zereoed in now.

 

[Migmac]

Anyone got any suggestions for a good starter gun?.

Watched a guy from Blackpool going through his 2nd hand stock and they were anywhere from £400 upwards?.

Had some lovely kit mind!.

I’d go PCP and a BSA, only because I’m a BSA fan

 

[roblane65]

Anyone got any suggestions for a good starter gun?.

Watched a guy from Blackpool going through his 2nd hand stock and they were anywhere from £400 upwards?.

Had some lovely kit mind!.

If you want budget
Smk victory pcp very cheap and you can get it as a kit rifle bag scope etc they get good reviews , It was what I was going to buy before I was offered the bsa . Speak to @northwest
It's a rabbit hole mind

 

[Keithmac]

If you want budget
Smk victory pcp very cheap and you can get it as a kit rifle bag scope etc they get good reviews , It was what I was going to buy before I was offered the bsa . Speak to @northwest
It's a rabbit hole mind

Thanks, will have a look into it.

I've been putting it off as I'll end up buying one lol

Are there any decent Forums I can have a mooch about on?.

 

[Onoff]

What about a Crossman break barrel with synthetic stock? Cheap, no wood to worry about.

 

[Keithmac]

All recommendations welcome, could be a nice Birthday present!.

 

[Shox Dr]

This is an excellent summation of the issue



Actually it is only recently that centrefire scopes have been designed to cope with the double recoil (as described above) of a spring airgun, they really were scope killers.

I was given a Relum underlever in .22 you could not keep a scope on it. within a handful of shots it would fall off. Pig heavy as well. hated the thing.

Found a picture of the gun pre stripping. You can just see the 3 cap head screws sticking above the scope rail. You'll note the rear mount abuts the rear screw. Then how the scope itself abuts the other side of the rear mount. Zero movement and the sights remain set.

View attachment 378676

Fantastic Air Rifle, very underrated. Over shadowed by the HW35 (heavy and noisy but accurate) and the Feinwerkbau. I lusted after both, until I picked up the 45.
Amazing consistant grouping throughout its capable range. Should have never sold it.

I’d go PCP and a BSA, only because I’m a BSA fan

I bought a Theoben Rapid 7 about 25yrs ago.
PCPs are the equalant to Water Cooled TIG torches. Once you have used one, you never want to go back.

 

[Onoff]

Come the Apocalypse you'll be glad you've got a break barrel springer!

 

[Shox Dr]

Come the Apocalypse you'll be glad you've got a break barrel springer!

My wife would be too busy passing me .300WinMag

 

[Onoff]

Fantastic Air Rifle, very underrated.

Bought with my first week's wages from Jim Johnson Tackle in Bexleyheath circa 1983. I also looked at the HW80, FWB35 and from memory an Anshütz but can't recall the model number.

 

[Shox Dr]

Bought with my first week's wages from Jim Johnson Tackle in Bexleyheath circa 1983. I also looked at the HW80, FWB35 and from memory an Anshütz but can't recall the model number.

Just looked they only made them from 79-81. I bought mine from Mick Bulmers Gunshop in York. He was a good friend of my dad. So got pretty much everything at trade. I bought a Sharp Invona at the same time for 18quid.

 

[Onoff]

Wish I'd bought a .20 barrel for the Original 45 when I could have done. Just for something a bit different.

 

[Onoff]

I bought a Sharp Invona at the same time for 18quid.

Chap I knew got caught shooting squirrels in Greenwich Park with one of those.