OJCar
Member
- Messages
- 2,478
- Location
- Lothian & Westmorland
Get them sold quick before they "do a Dyson" and fall to bits !The screws aren't even stainless and some are rusting!
- Thread starter monkeymark
- Start date
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,898
- Location
- Sevenoaks, UK
Straight to e-bay, Etsy, etc !
They should do you're beer fund no end of good.
Trying to find some 2 core flat cable. It's 6mm wide x "really thin" :
Haven't got the original PSUs either. Nothing special other than they had Dyson stamped on them.
OJCar
Member
- Messages
- 2,478
- Location
- Lothian & Westmorland
"Barn Find" condition !
MattF
Forum Supporter
- Messages
- 17,808
- Location
- South Yorkshire
Would figure 8/speaker cable fit?
Maker
Most folk just call me; Orange Joe
- Messages
- 10,630
- Location
- Keeler crater
Made by Lorom, have a search of their catalogue, it might be a standard part.
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,898
- Location
- Sevenoaks, UK
I think it has to be flat like the original. It sort of doubles as a "drive belt". Made a short video clip.
JOEPRO
Member
- Messages
- 4,886
- Location
- UK
Thanks, yes I tend to hoard tools and car parts anyway
These original vices stopped production in UK around 2000 so yep supply of decent ones is sure to dwindle in years to come and the value of good ones will go up.I'll stop at about 12x that's the plan at least. I am also looking for a Record 94 1/2 In decent order and cheap (I don't ask for much do I) if anyone sees one or has one let me know please.
Maker
Most folk just call me; Orange Joe
- Messages
- 10,630
- Location
- Keeler crater
Maybe you could use some multi way flat flex/ribbon cable if you can't find the original stuff.
There's a guy on youtube building a "DIYson" lamp, I got bored five minutes in so haven't watched any of it, but you could see what cable he's using.
Moose McAlpine
Member
- Messages
- 1,592
- Location
- Norf Lund'n
You can never have too many tools.
Last I watched diyson was using pogo pins sliding down copper tracks to pass the power. Just re-checked now and he's not posted any updates to that project in the last 9 months.
Flat flex cables are available from Digikey, but will depend on how the ends are terminated and the conductor spacing whether off the reel ffc will solve Onoff's situation
Onoff
In the land of the unfinished project I am King!
- Messages
- 12,898
- Location
- Sevenoaks, UK
Thanks. That link takes me to one Parlex cable in various lengths. Unfortunately it's 7.57mm wide, I need 6mm. Seems quite critical space wise in terms of the channels it runs in.
Sergei Slovenija
Member
- Messages
- 1,267
- Location
- Slovenija Ljubljana
Don't forget to share photos of the process. I have already accumulated 200 kg of cable and a bag of copper pipes and terminals.
lchris21
Member
- Messages
- 2,001
- Location
- South Wales
..a replacement led work light to replace the one I left under my van and drove off and forgot 
Identical to the sealey one I lost, obviously made in the same factory but a tenner cheaper than sealey. Works great with the swivel head.....I'll try and remember to do a stock check when I'm finished working under the van next time
Identical to the sealey one I lost, obviously made in the same factory but a tenner cheaper than sealey. Works great with the swivel head.....I'll try and remember to do a stock check when I'm finished working under the van next time
Last edited:
brewdexta
The biggest tool in the box
- Messages
- 5,773
- Location
- UK
I bought a new one too, a Mellita Calibra, the last one was too loud, not a proper burr grinder and I dropped the grinds container. The new one is a burr grinder, is a lot quieter and it will grind by weight, I don't like the number of cups settings most have. And only 80 quid on Amazon at the moment, so far very good. Confuses the missus on weight as you have to press the "Tare" button before grinding by weight so she keeps turning it to the cups setting.New Grinder... for coffee
View attachment 426271
We'll see how long this one lasts. Thought to be fair the last one lasted 3yrs and 36kg of beans.
Did I mention I liked Coffee
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,298
- Location
- Going Away.
A good friend has left the fire trade.
He has now moved onto working from home 7 days a week.
Happy retirement John
He was kind enough to let me have this small bundle of tools.
A good selection of drills.
Plus 2 small screwdrivers.
Some bigger screwdrivers.
A new bundle of Fire test keys.
They look impressive, but I know, from experience, they are never as good as OE keys.
Cable shears.
I also stopped by a nice shop on my way home.
a Meths Jewelers blow torch.
A classic 1970's car.
A small Oil lamp.
He has now moved onto working from home 7 days a week.
Happy retirement John
He was kind enough to let me have this small bundle of tools.
A good selection of drills.
Plus 2 small screwdrivers.
Some bigger screwdrivers.
A new bundle of Fire test keys.
They look impressive, but I know, from experience, they are never as good as OE keys.
Cable shears.
I also stopped by a nice shop on my way home.
a Meths Jewelers blow torch.
A classic 1970's car.
A small Oil lamp.
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 18,005
- Location
- East Yorkshire
Not sure how I'll get on with this one. The first All Core Grinder had a removable cassette holding the burrs. I could take that outside and blow it out with the airline. The new one (All Core Plus) the inner burr id fixed, with the outlet to the side. I can see it been a trap for fines.
What are Fire test keys? Searching didn't really explain.
