Today I acquired...........

[northwest]

Found the Controller a Littl bit cheaper, I think:

Page Not Found - Aliexpress.com

BUT there is a possibility the manual is not in English, which could be problematic.

 

[Hood]

Found the Controller a Littl bit cheaper, I think:

Page Not Found - Aliexpress.com

BUT there is a possibility the manual is not in English, which could be problematic.

I am fairly certain that Newker are the manufacturers of the controls and others like SZGH rebadge them. The thing about SZGH however is they have excellent support and Mike, their engineer, knows the controls inside out.

 

[northwest]

Mike, their engineer, knows the controls inside out.

Which is worth it's weight in gold.

 

[redlig]

Can't afford titanium or carbon but be very careful what you say about "18 stone in hideous lycra ........................................

MAMIL's ?

 

[Nick DV]

MAMIL's ?

Have you been stalking me ..........?

 

[stuvy]

Have you been stalking me ..........?

Only if youv been weaving as you slowly pedal along side by side on a narrow country lane

 

[Jan-DIY]

Today digging around here and found some special stuff.
Castolin 14 flame rods for cast iron.
Anyone know about these?
Flux cover is nearly disappeared.

 

[25.4_mechanic]

Today digging around here and found some special stuff.
Castolin 14 flame rods for cast iron.
Anyone know about these?
Flux cover is nearly disappeared.

Of course, I don't know anything about these in particular, they are probably no longer usable for the original purpose ....

... but, I do know a method of welding cast iron in the TIG process using a special cast welding electrode, where the sheathing is knocked off beforehand - so roughly what you found here - so should work well.

Good success,


Carsten

--

 

[droopsnoot]

I picked this trolley off the scrap this afternoon. It's got a dodgy caster that someone has tried to fix, but it'll probably be OK and almost certainly better than my other two trolleys which are both old tea trolleys.

 

[Rannsachair]

Decided wearing baffies while changing my 10" 4 jaw chuck was not a good idea...... Redwing Petrokings, £30 cheaper than Amazon on Ebay

 

[RichardM]

I always wear my steelies (well plasticees as they don't freeze your toes off in the cold) in the garage. I have lost count of the number of times I have saved something I have dropped getting wrecked on the floor with a well placed toe cap!

 

[slim_boy_fat]

I picked this trolley off the scrap this afternoon. It's got a dodgy caster that someone has tried to fix, but it'll probably be OK and almost certainly better than my other two trolleys which are both old tea trolleys.

By the 'buffers' on the bottom, that looks like it came from a hospital?

 

[DAPPH]

Today I acquired some lightness

Carbon fibre lightness to attach to my bicycle to be exact

View attachment 326408

To avoid any doubt, my thoughts before buying this were "ooh carbon fibre"

Looking at that strange seat I can see why .......both before & after buying it .

 

[DAPPH]

With similar conversations on the Lotus Seven club forum, where carbon nosecone,s cycle wings, rear wings, aeroscreens, seats, steering wheels, no paint, no heater, etc etc and all the weight saved . . . and someone who really needed to cut back on the pies clambered in . . I used to mention an advert I saw on US TV while was pretty much living over there in 2005 - some product/device/treatment that claimed to remove several pounds of compacted facial material from somewhere up where the sun really ought not to be shining . . .

First time I saw it, I was sat in an Applebees enjoying their maple nut brownie . . .

Facial or fecal .. still funny which ever way you read it.

 

[bricol]

Facial or fecal .. still funny which ever way you read it.

When I commented on a damn great billboard in Cincinnati offering "facials" with a picture of a very attractive lady . . . I got a very strange look . . .

 

[bricol]

I always wear my steelies (well plasticees as they don't freeze your toes off in the cold) in the garage. I have lost count of the number of times I have saved something I have dropped getting wrecked on the floor with a well placed toe cap!

My toes twitch if I do anything involving even slight hint of work and I'm not wearing my protective boots . . .

There's a guy over on retro-rides who appears in lots of photos grinding, wire-wheeling, welding . . in open-toed sandals or crocs . . . I wouldn't be able to work within ear-shot of him, 'cos when it happens, I don't want to be the one picking his toes up to hand to the paramedic . . .

 

[bourbon]

Following on from my 'new van' thread. I acquired This. within budget. With enough left to get a tow bar fitted. I'm also thinking about not putting windows in, but a reversing camera. I think it actually works out cheaper.

 

[Hood]

... I'm also thinking about not putting windows in, but a reversing camera. I think it actually works out cheaper....

I put one of the dashcam type mirrors in and it has been pretty good. Not only does it act as both front and rear dashcam but when you put it in reverse gear the view lowers (you can adjust on touch screen) for reversing. The reason I really needed mine is because the bleeding dog is always blocking the left hand mirror and I get sick of telling him to sit down
Similar to this

https://www.amazon.co.uk/WOLFBOX-Mirror-camera-Screen-Trucks/dp/B0811Q28N6/ref=sr_1_4?crid=3HCAO8RPBHTH9&keywords=WOLFBOX+Mirror+Dash+Cam&qid=1641423377&s=electronics&sprefix=wolfbox+mirror+dash+cam%2Celectronics%2C68&sr=1-4

 

[minimutly]

My toes twitch if I do anything involving even slight hint of work and I'm not wearing my protective boots . . .

There's a guy over on retro-rides who appears in lots of photos grinding, wire-wheeling, welding . . in open-toed sandals or crocs . . . I wouldn't be able to work within ear-shot of him, 'cos when it happens, I don't want to be the one picking his toes up to hand to the paramedic . . .

Have you not watched the vids of the indians working on lorry engines, suspensions etc? Thy're lucky if the have sandals - mostly flip flops or nothing...

 

[ronan]

Have you not watched the vids of the indians working on lorry engines, suspensions etc? Thy're lucky if the have sandals - mostly flip flops or nothing...

Brilliant videos though, they do amazing work with very little in the way of tools and equipment. Just get yer nightshirt and sandals on and off to work you go !