Today I acquired...........

[Wedg1e]

There used to be an excellent hand cleaner by Sabesto which was rebranded by Wurth; then it changed from being orange-based to white pumice-type stuff (but still excellent), now they've apparently reworked it to remove the 'bits' to help the water pollution, and I hear it's nothing like as good as either of the previous formulae... so I've gone over to Swarfega. Which also used to be fantastic but is now merely good, so either they changed it or muck is getting muckier

 

[Hood]

You are lucky you have better access than we do. I remember seeing wurth shops in france

The rep I had for a while did up your way as well.

 

[Hood]

There used to be an excellent hand cleaner by Sabesto which was rebranded by Wirth; then it changed from being orange-based to white pumice-type stuff (but still excellent), now they've apparently reworked it to remove the 'bits' to help the water pollution, and I hear it's nothing like as good as either of the previous formulae... so I've gone over to Swarfega. Which also used to be fantastic but is now merely good, so either they changed it or muck is getting muckier

Aye, I have that, used to be brilliant, now its slimy and doesn't work nearly as well.

 

[Onoff]

There used to be an excellent hand cleaner by Sabesto which was rebranded by Wirth; then it changed from being orange-based to white pumice-type stuff (but still excellent), now they've apparently reworked it to remove the 'bits' to help the water pollution, and I hear it's nothing like as good as either of the previous formulae... so I've gone over to Swarfega. Which also used to be fantastic but is now merely good, so either they changed it or muck is getting muckier

Best I ever used I think was called "Solopol" or something like that, had ground up walnut shells in it, it was magic.

 

[James1979]

From a skip. Two filters from a duct of some sort. As new. I want to use one of them as a pre filter on the down draft for my plasma table. It’ll give the element filter an easier life

 

[Pete.]

This will teach me to leave stuff lying around. I came back from work today and the citric pixies have been attacking my stuff....

 

[roblane65]

Tidy

 

[Brad93]

That nippy is mint

 

[dan.taylor.1]

Did the citric free it up?

 

[Pete.]

Did the citric free it up?

No, but the mapp torch did

 

[500e]

We had a Worth lady rep she was great new the products inside out a load of the boys wentclubing with her as well a real laugh but a serious rep

 

[Kram]

I was after some more tool holders.. but £15-20 each, I dont really need them, or have space for more on the shelf. Then Amazon poped up with these

So I bought all five for 28 quid

And then these pop up.. dcmt pcd inserts, I have ordered a couple.
www.amazon.co.uk/gp/aw/d/B07XRFXZ6D

 

[Hood]

I was after some more tool holders.. but £15-20 each, I dont really need them, or have space for more on the shelf. Then Amazon poped up with these
View attachment 288478
So I bought all five for 28 quid

You get some right crazy prices on Amazon. I got some 1.1/4" stainless ball valves for £5 each, weird thing was the smaller and bigger ones were all normal kind of prices but luckily it was 1.1/4" I was needing

 

[4String.]

We had a Worth lady rep she was great new the products inside out a load of the boys wentclubing with her as well a real laugh but a serious rep

I tried reading that in a "There was a young woman from Leeds..." stylee and cracked up laughing

 

[4String.]

Aye, I have that, used to be brilliant, now its slimy and doesn't work nearly as well.

 

[Guest 10992]

Today I had my compressor inspected, tested and certified. Bargain really. It cost me £40 as a non runner. Rewired it, replaced broken drain tap, fitted missing pulley and fitted new belts. , so cost me nearly a £100 in total. It's probably around 10-12CFM. It should be just sufficient for spraying. Luckily I have another smaller compressor that will feed my air fed mask. Happy day!

 

[EM1L4]

I was after some more tool holders.. but £15-20 each, I dont really need them, or have space for more on the shelf. Then Amazon poped up with these
View attachment 288478
So I bought all five for 28 quid

And then these pop up.. dcmt pcd inserts, I have ordered a couple.
www.amazon.co.uk/gp/aw/d/B07XRFXZ6D

They are still available at a similar price (seems to be loads of sellers...)

 

[minimutly]

They are still available at a similar price (seems to be loads of sellers...)

Is there a size code for these?

 

[Onoff]

We had a Worth lady rep

So did we years ago. Size 14 squeezed into a size 10 blouse got her through the door. Sold us BZP when we ordered galv fixings. Think it was ignorance rather than deliberate.

 

[minimutly]

So did we years ago. Size 14 squeezed into a size 10 blouse got her through the door. Sold us BZP when we ordered galv fixings. Think it was ignorance rather than deliberate.

Did it matter?