Cuthy246
Member
- Messages
- 934
- Location
- Scotland, Highlands
Yeah citric is the plan, to be fair most of it is just a thick layer of dust. Late model 3 litre, block markings indicate Sep 88
- Thread starter monkeymark
- Start date
Seadog
Save the planet. It's the only one with rum!
- Messages
- 12,947
- Location
- NE London - UK
I picked this up a couple of days ago from eBay at a very good price
An LDJT25. It's the bottom bearing from the Elliott Progress 1&2 pillar drills. Do I need one? No, but it's always handy to have a spare. These things are pricey.
An LDJT25. It's the bottom bearing from the Elliott Progress 1&2 pillar drills. Do I need one? No, but it's always handy to have a spare. These things are pricey.
Wallace
Member
- Messages
- 7,768
- Location
- Staines, Middlesex, England.
1968 2.5 Essex piston from a Zephyr I rebuilt, someone dropped a ball bearing in from the carb!
Cuthy246
Member
- Messages
- 934
- Location
- Scotland, Highlands
bit coarse for bead blasting should have used some smaller ones 
8ob
Member
- Messages
- 14,445
- Location
- Nescient in the vale
God mode restorations
Member
- Messages
- 8,149
- Location
- uk colchester
A nice vintage motor that will be perfect for my camel back drill. A vintage bottle jack. ( currently seized but not for long ) and a set of oil pour pots.
God mode restorations
Member
- Messages
- 8,149
- Location
- uk colchester
Will have to Google it now
- Messages
- 14,720
- Location
- UK
@slim_boy_fat and @Welderpaul , the 15m pressure hose arrived that you were interested in. I bought it from here
Its far better than the stock hose, but at nearly half the cost of the whole pressure washer then it should
Its braided rubber rather than hard plastic which helps,
View attachment 262332
You can see it uncoils quite easily, the Karcher one is like a watch spring
View attachment 262333
This is the karcher hose, I guess if it was stretched out in a warm room for a while, or stick it in some warm water for a while then stretch it out then it would be a bit better but its always going to want to tangle up.
View attachment 262335
the two side by side, the new one is on the left, its a bit thicker but has a higher temp/pressure spec but is still more flexible and seems to have less memory. Its snowing up here so I won't be trying it out for a while. I checked it fits the pressure washer ok but that's about it for now.
View attachment 262334
Cheers
Andy
Thanks Andy, will buy one ready for the spring jetwashing season!
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,332
- Location
- Going Away.
Last edited:
Ah! a volunteer....
You can do you aerial now
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,332
- Location
- Going Away.
Ah! a volunteer...
No.
I said:
You can fix your aerial.
I will add:
As I drink your coffee.
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
First thought looking at the photo...… Is he going to baste it with that pot of oil on the mill ?
Arc Tourist
Member
- Messages
- 5,026
- Location
- Wales
Noticed the wheels on your Tom Senior mill. Have you found any negative aspects to adding the wheels ?
Farside
Badly Welded Man
- Messages
- 6,286
- Location
- Ireland
Won't need Donner or Blitzen this year anyway.
brightspark
Member
- Messages
- 41,357
- Location
- yarm stockton on tees
thats not the stuff you hang up for weeks on end salted is it in a cold pantry and you just cut bits off to fry yuck
Shox Dr
Chief Engineer to Carlos Fandango
- Messages
- 18,005
- Location
- East Yorkshire
thats not the stuff you hang up for weeks on end salted is it in a cold pantry and you just cut bits off to fry yuck
Yup. 99.9% of people cut it incorrectly making it very chewy. Cut across the muscle its easy to chew and has a sweet taste.
Yes the feet dont have enough adjustment in them. I’ve a set on the M300, after I had taken the load off all the feet, there wasn’t enough adjustment left to level it, and I’m only talking 5mm variance. I had to slice some pucks to sit underneath the feet. Not a problem in this case as I dont see a reason to move it, probably the next time it gets moved I’ll be dead. The main reason I bought them was to lift the machines up, wheels were a bonus
