- Thread starter monkeymark
- Start date
Memmeddu
Member
- Messages
- 5,548
- Location
- Italia Sardegna
Well not today but yesterday , finally my order came to home .
I've ordered those screwdrivers on July 24th and almost forgot to have placed the order. Because it took too much time (when I order from Beta it usually takes maximum 2 weeks)
So...
Beta grip series screwdrivers 10 pieces set
Flat in 3x75, 3.5x100, 4x30, 4x125, 5.5x150, 6.5x150mm
Phillips in PH0x60, PH1x30, PH1x80, PH2x100mm
And an insulated non magnetic Beta grip bit holder to complete my insulated screwdrivers set ,I can't really have any single screwdriver size and type in my toolbox ,I should need a van to have all the screwdrivers I could need
I've ordered those screwdrivers on July 24th and almost forgot to have placed the order. Because it took too much time (when I order from Beta it usually takes maximum 2 weeks)
So...
Beta grip series screwdrivers 10 pieces set
Flat in 3x75, 3.5x100, 4x30, 4x125, 5.5x150, 6.5x150mm
Phillips in PH0x60, PH1x30, PH1x80, PH2x100mm
And an insulated non magnetic Beta grip bit holder to complete my insulated screwdrivers set ,I can't really have any single screwdriver size and type in my toolbox ,I should need a van to have all the screwdrivers I could need
Brad93
Member
- Messages
- 19,105
- Location
- Essex, United Kingdom
MattF
Forum Supporter
- Messages
- 17,931
- Location
- South Yorkshire
Try kerosene/heating oil.
Brad93
Member
- Messages
- 19,105
- Location
- Essex, United Kingdom
Brad93
Member
- Messages
- 19,105
- Location
- Essex, United Kingdom
I’ve ended up washing it out with the pressure washer it was so filthy then liberally using about a litre of WD40 and an airline. Will put a radiator in it overnight.
just washing the rubber for the drawers and then clean up the rest of the drawer runners.
so well made this cabinet, even though it’s been in a fight with a forklift everything still works.
just washing the rubber for the drawers and then clean up the rest of the drawer runners.
so well made this cabinet, even though it’s been in a fight with a forklift everything still works.
Rannsachair
Forum Supporter
- Messages
- 4,396
- Location
- Lochgilphead, Argyll, Republic of Scotland
Looks like a R1100 S Sport version with the stiffer/taller suspension and wider rear tyre? I loved mine too, i bought a 6 month old ex-demonstrater from John Clark BMW in Dundee, was a great handling bike on bumpy roads, sounded good on a vanderlinde exhaust and remap.
Just fell out with it after an ABS valve block failure.
Pete.
Member
- Messages
- 14,901
- Location
- Kent, UK
Mine is non-abs deliberately so I can use my long range tank. It'll go 250 miles if you fill it to the brim.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
Not to self.
NO is a good word.
But in my defence............
Shinny.
Possible spares.
Hmmm fun?
Small brass not shinny, yet, dog.
Ok not shinny.
So much not right. But the pump is going to be used, the extra leg?
Used to fix another unit.
OK. Will be shinny.
Screwdriver, a useful one. A pocket Knife, ex RN and a thing.
Oh Dog again.
A cute little vice, Ok not a chance of shinny.
Today.
I hope this one doesn't leak, well it hasn't yet.
Told you, shinny.
Yes it does work.
NO is a good word.
But in my defence............
Shinny.
Possible spares.
Hmmm fun?
Small brass not shinny, yet, dog.
Ok not shinny.
So much not right. But the pump is going to be used, the extra leg?
Used to fix another unit.
OK. Will be shinny.
Screwdriver, a useful one. A pocket Knife, ex RN and a thing.
Oh Dog again.
A cute little vice, Ok not a chance of shinny.
Today.
I hope this one doesn't leak, well it hasn't yet.
Told you, shinny.
Yes it does work.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
That brass dog is so cute.
Been told it is bad luck to polish up.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,338
- Location
- Going Away.
Odd thing has happened.
The door bell has gone.
Dong ding.
Should be Ding dong.
Opening said door.
This was on the door step.
This is after I had opened it.
This was inside.
The door bell has gone.
Dong ding.
Should be Ding dong.
Opening said door.
This was on the door step.
This is after I had opened it.
This was inside.
MattF
Forum Supporter
- Messages
- 17,931
- Location
- South Yorkshire
Farside
Badly Welded Man
- Messages
- 6,293
- Location
- Ireland
Used to have a Friedland Chimes bell that went ding-dong for the front door and dong-ding for the back door.
