- Thread starter monkeymark
- Start date
Memmeddu
Member
- Messages
- 5,439
- Location
- Italia Sardegna
That's lovely .A new lathe, not the Warco, the one sat on the headstock.Cleaning is in progress and should be finished tomorrow.
View attachment 249542
We are waiting to see it working
Agroshield
Member
- Messages
- 6,098
You need a third one. Whether it sits above the new one or below the Warco is up to you.
Pete.
Member
- Messages
- 14,876
- Location
- Kent, UK
A new lathe, not the Warco, the one sat on the headstock.
View attachment 249542
Nice to see a small lathe with an appropriately-sized chuck insted of fsome oversized monster.
angellonewolf
Member
- Messages
- 8,797
- Location
- bristol england
A new heatsink the stock one was a bit carp the fan was on its way out and went like an airplane when doing gaming
So bought on ebay for what I call a very cheap price 11 quid delivered 2nd hand but nice condition and fan is not noisy
beer can for scale it was a last night empty before any one asks i don't do hair of the dog not that i needed it as doing a bike ride today so wanted to feel a bit fresh
So bought on ebay for what I call a very cheap price 11 quid delivered 2nd hand but nice condition and fan is not noisy
beer can for scale it was a last night empty before any one asks i don't do hair of the dog not that i needed it as doing a bike ride today so wanted to feel a bit fresh
Matthew92
Member
- Messages
- 123
- Location
- Warwickshire, UK
I’ll get some good pictures later when it’s cleaned up and back together, also some sizes. Not sure what the centre height, swing or distance between centres is yet.
Oh, I already have the 3rd one and it sits between the Warco and the Wakefield. Trouble is I don’t have the room to keep it anymore and it’s just in the way, so soon to be coming to a sales thread near you.
Oh, I already have the 3rd one
and it sits between the Warco and the Wakefield. Trouble is I don’t have the room to keep it anymore and it’s just in the way, so soon to be coming to a sales thread near you.
The_Yellow_Ardvark
https://www.death-clock.org/
- Messages
- 20,257
- Location
- Going Away.
Yesterday I was given some bits to keep my mind in one place.
A decent stove, needs some works, as it is only part time.
Sometimes it works well others it is bloody dangerous.
A PSU, this plan A to repair my failed one, but this one had issues.
Oh well, it was fun to look at fixing it.
There was a few components floating around the inside.
This is dead, I know the motor is shot, but was the switch I was after.
Plus this.
No idea what it future is.
A decent stove, needs some works, as it is only part time.
Sometimes it works well others it is bloody dangerous.
A PSU, this plan A to repair my failed one, but this one had issues.
Oh well, it was fun to look at fixing it.
There was a few components floating around the inside.
This is dead, I know the motor is shot, but was the switch I was after.
Plus this.
No idea what it future is.
lchris21
Member
- Messages
- 2,001
- Location
- South Wales
passed this on the side of the road, free to collector!.....whilst out cycling yesterday morning............obviously too heavy to carry in my back pocket 
........surprised to find it still there several hours later.....now safely rescued and more places to store stuff I wont be able to find 
........surprised to find it still there several hours later.....now safely rescued and more places to store stuff I wont be able to find
angellonewolf
Member
- Messages
- 8,797
- Location
- bristol england
^^^^^ no pic showing
lchris21
Member
- Messages
- 2,001
- Location
- South Wales
Lol was there a minute ago.......the previous owner probably said the same thing
bigegg
Scream Not Working Because Space Make Deaf
- Messages
- 9,651
- Location
- Leeds, West Yorkshire
"Barn find"
Is it "rare, vintage" as well?
It's not overly rare, but early 90's so it's getting vintage. But definitely a barn find.
Farmer had parked it up as scared the sheep off and been using it as a work bench since.
mid 1950's 2nd hand and new machine tool brochures, I got theses at the end of February and thought @spencer 427 might be interested in them. I then decided to have the local industrial museum first refusal as a fair few of the machines were made locally. They dont want these as they dont have the space for them ( which is what I thought they may say), anyway here are a few pages from them as others might be interested to have a look too.
I haven't seen @spencer 427 online recently, so if anyone has contact with him, if he wants them and he sends me his address in a message I'll post them on to him.
I haven't seen @spencer 427 online recently, so if anyone has contact with him, if he wants them and he sends me his address in a message I'll post them on to him.
Brad93
Member
- Messages
- 19,061
- Location
- Essex, United Kingdom
I’ll drop him an text message
well thats easy then, if he doesn't want them, send me a pm with your address on and I'll post them to you instead.
